From: Daniel Scheller <d.schel...@gmx.net>
Adjustments to match the FPGA firmware, and the signal I/Q values are
reported as s16 types from the card firmware.
Picked up from the upstream dddvb GIT.
Signed-off-by: Daniel Scheller <d.schel...@gmx.net>
---
drivers/media/pci/ddbridge/ddbridge-mci.c | 2 +-
drivers/media/pci/ddbridge/ddbridge-mci.h | 56 +++++++++++++++----------------
2 files changed, 29 insertions(+), 29 deletions(-)
diff --git a/drivers/media/pci/ddbridge/ddbridge-mci.c
b/drivers/media/pci/ddbridge/ddbridge-mci.c
index 7d402861fa9e..fa0d7d0cc6f6 100644
--- a/drivers/media/pci/ddbridge/ddbridge-mci.c
+++ b/drivers/media/pci/ddbridge/ddbridge-mci.c
@@ -342,7 +342,7 @@ static int start(struct dvb_frontend *fe, u32 flags, u32
modmask, u32 ts_config)
memset(&cmd, 0, sizeof(cmd));
if (state->base->iq_mode) {
- cmd.command = SX8_CMD_SELECT_IQOUT;
+ cmd.command = SX8_CMD_ENABLE_IQOUTPUT;
cmd.demod = state->demod;
cmd.output = 0;
mci_cmd(state, &cmd, NULL);
diff --git a/drivers/media/pci/ddbridge/ddbridge-mci.h
b/drivers/media/pci/ddbridge/ddbridge-mci.h
index 389f6376603b..2e74f0544717 100644
--- a/drivers/media/pci/ddbridge/ddbridge-mci.h
+++ b/drivers/media/pci/ddbridge/ddbridge-mci.h
@@ -51,40 +51,40 @@
#define SX8_TSCONFIG_BURSTSIZE_8K (0x00000020)
#define SX8_TSCONFIG_BURSTSIZE_16K (0x00000030)
-#define SX8_DEMOD_STOPPED (0)
-#define SX8_DEMOD_IQ_MODE (1)
-#define SX8_DEMOD_WAIT_SIGNAL (2)
-#define SX8_DEMOD_WAIT_MATYPE (3)
-#define SX8_DEMOD_TIMEOUT (14)
-#define SX8_DEMOD_LOCKED (15)
+#define SX8_DEMOD_STOPPED (0)
+#define SX8_DEMOD_IQ_MODE (1)
+#define SX8_DEMOD_WAIT_SIGNAL (2)
+#define SX8_DEMOD_WAIT_MATYPE (3)
+#define SX8_DEMOD_TIMEOUT (14)
+#define SX8_DEMOD_LOCKED (15)
-#define MCI_CMD_STOP (0x01)
-#define MCI_CMD_GETSTATUS (0x02)
-#define MCI_CMD_GETSIGNALINFO (0x03)
-#define MCI_CMD_RFPOWER (0x04)
+#define MCI_CMD_STOP (0x01)
+#define MCI_CMD_GETSTATUS (0x02)
+#define MCI_CMD_GETSIGNALINFO (0x03)
+#define MCI_CMD_RFPOWER (0x04)
-#define MCI_CMD_SEARCH_DVBS (0x10)
+#define MCI_CMD_SEARCH_DVBS (0x10)
-#define MCI_CMD_GET_IQSYMBOL (0x30)
+#define MCI_CMD_GET_IQSYMBOL (0x30)
-#define SX8_CMD_INPUT_ENABLE (0x40)
-#define SX8_CMD_INPUT_DISABLE (0x41)
-#define SX8_CMD_START_IQ (0x42)
-#define SX8_CMD_STOP_IQ (0x43)
-#define SX8_CMD_SELECT_IQOUT (0x44)
-#define SX8_CMD_SELECT_TSOUT (0x45)
+#define SX8_CMD_INPUT_ENABLE (0x40)
+#define SX8_CMD_INPUT_DISABLE (0x41)
+#define SX8_CMD_START_IQ (0x42)
+#define SX8_CMD_STOP_IQ (0x43)
+#define SX8_CMD_ENABLE_IQOUTPUT (0x44)
+#define SX8_CMD_DISABLE_IQOUTPUT (0x45)
-#define SX8_ERROR_UNSUPPORTED (0x80)
+#define MCI_ERROR_UNSUPPORTED (0x80)
-#define SX8_SUCCESS(status) (status < SX8_ERROR_UNSUPPORTED)
+#define MCI_SUCCESS(status) (status < MCI_ERROR_UNSUPPORTED)
-#define SX8_CMD_DIAG_READ8 (0xE0)
-#define SX8_CMD_DIAG_READ32 (0xE1)
-#define SX8_CMD_DIAG_WRITE8 (0xE2)
-#define SX8_CMD_DIAG_WRITE32 (0xE3)
+#define SX8_CMD_DIAG_READ8 (0xE0)
+#define SX8_CMD_DIAG_READ32 (0xE1)
+#define SX8_CMD_DIAG_WRITE8 (0xE2)
+#define SX8_CMD_DIAG_WRITE32 (0xE3)
-#define SX8_CMD_DIAG_READRF (0xE8)
-#define SX8_CMD_DIAG_WRITERF (0xE9)
+#define SX8_CMD_DIAG_READRF (0xE8)
+#define SX8_CMD_DIAG_WRITERF (0xE9)
struct mci_command {
union {
@@ -141,8 +141,8 @@ struct mci_result {
u32 ber_denominator;
} dvbs2_signal_info;
struct {
- u8 i_symbol;
- u8 q_symbol;
+ s16 i;
+ s16 q;
} dvbs2_signal_iq;
};
u32 version[4];
--
2.16.4
