From: Daniel Scheller <d.schel...@gmx.net>
When running in parallel TS mode (cfg->parallel=1), increase the output
speed in the demod.
Picked up from the upstream dddvb-0.9.33 release.
Signed-off-by: Daniel Scheller <d.schel...@gmx.net>
---
drivers/media/dvb-frontends/stv0910.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/media/dvb-frontends/stv0910.c
b/drivers/media/dvb-frontends/stv0910.c
index f5b5ce971c0c..0d6130f97c36 100644
--- a/drivers/media/dvb-frontends/stv0910.c
+++ b/drivers/media/dvb-frontends/stv0910.c
@@ -1200,7 +1200,6 @@ static int probe(struct stv *state)
write_reg(state, RSTV0910_P1_TSCFGM, 0xC0); /* Manual speed */
write_reg(state, RSTV0910_P1_TSCFGL, 0x20);
- /* Speed = 67.5 MHz */
write_reg(state, RSTV0910_P1_TSSPEED, state->tsspeed);
write_reg(state, RSTV0910_P2_TSCFGH, state->tscfgh | 0x01);
@@ -1208,7 +1207,6 @@ static int probe(struct stv *state)
write_reg(state, RSTV0910_P2_TSCFGM, 0xC0); /* Manual speed */
write_reg(state, RSTV0910_P2_TSCFGL, 0x20);
- /* Speed = 67.5 MHz */
write_reg(state, RSTV0910_P2_TSSPEED, state->tsspeed);
/* Reset stream merger */
@@ -1790,7 +1788,7 @@ struct dvb_frontend *stv0910_attach(struct i2c_adapter
*i2c,
state->tscfgh = 0x20 | (cfg->parallel ? 0 : 0x40);
state->tsgeneral = (cfg->parallel == 2) ? 0x02 : 0x00;
state->i2crpt = 0x0A | ((cfg->rptlvl & 0x07) << 4);
- state->tsspeed = 0x28;
+ state->tsspeed = cfg->parallel ? 0x10 : 0x28;
state->nr = nr;
state->regoff = state->nr ? 0 : 0x200;
state->search_range = 16000000;
--
2.16.1
