On 02/22/2018 10:51 AM, Hugues Fruchet wrote:
> Add DCMI JPEG support.
Does this patch depend on the 'fix lock scheme' patch?
It looks good to me except for one small thing (see below), but I think this
depends on the 'fix lock scheme' patch, right?
>
> Signed-off-by: Hugues Fruchet <hugues.fruc...@st.com>
> ---
> drivers/media/platform/stm32/stm32-dcmi.c | 195
> +++++++++++++++++++++++-------
> 1 file changed, 148 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c
> b/drivers/media/platform/stm32/stm32-dcmi.c
> index 269e963..7eaaf7c 100644
> --- a/drivers/media/platform/stm32/stm32-dcmi.c
> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
> @@ -93,6 +93,11 @@ enum state {
> #define MIN_HEIGHT 16U
> #define MAX_HEIGHT 2048U
>
> +#define MIN_JPEG_WIDTH 16U
> +#define MAX_JPEG_WIDTH 2592U
> +#define MIN_JPEG_HEIGHT 16U
> +#define MAX_JPEG_HEIGHT 2592U
> +
> #define TIMEOUT_MS 1000
>
> struct dcmi_graph_entity {
> @@ -191,14 +196,67 @@ static inline void reg_clear(void __iomem *base, u32
> reg, u32 mask)
>
> static int dcmi_start_capture(struct stm32_dcmi *dcmi);
>
> +static void dcmi_buffer_done(struct stm32_dcmi *dcmi,
> + struct dcmi_buf *buf,
> + size_t bytesused,
> + int err)
> +{
> + struct vb2_v4l2_buffer *vbuf;
> +
> + if (!buf)
> + return;
> +
> + vbuf = &buf->vb;
> +
> + vbuf->sequence = dcmi->sequence++;
> + vbuf->field = V4L2_FIELD_NONE;
> + vbuf->vb2_buf.timestamp = ktime_get_ns();
> + vb2_set_plane_payload(&vbuf->vb2_buf, 0, bytesused);
> + vb2_buffer_done(&vbuf->vb2_buf,
> + err ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
> + dev_dbg(dcmi->dev, "buffer[%d] done seq=%d, bytesused=%zu\n",
> + vbuf->vb2_buf.index, vbuf->sequence, bytesused);
> +
> + dcmi->buffers_count++;
> + dcmi->active = NULL;
> +}
> +
> +static int dcmi_restart_capture(struct stm32_dcmi *dcmi)
> +{
> + spin_lock_irq(&dcmi->irqlock);
> +
> + if (dcmi->state != RUNNING) {
> + spin_unlock_irq(&dcmi->irqlock);
> + return -EINVAL;
> + }
> +
> + /* Restart a new DMA transfer with next buffer */
> + if (list_empty(&dcmi->buffers)) {
> + dev_err(dcmi->dev, "%s: No more buffer queued, cannot capture
> buffer\n",
> + __func__);
> + dcmi->errors_count++;
> + dcmi->active = NULL;
> +
> + spin_unlock_irq(&dcmi->irqlock);
> + return -EINVAL;
> + }
> +
> + dcmi->active = list_entry(dcmi->buffers.next,
> + struct dcmi_buf, list);
> + list_del_init(&dcmi->active->list);
> +
> + spin_unlock_irq(&dcmi->irqlock);
> +
> + return dcmi_start_capture(dcmi);
> +}
> +
> static void dcmi_dma_callback(void *param)
> {
> struct stm32_dcmi *dcmi = (struct stm32_dcmi *)param;
> struct dma_chan *chan = dcmi->dma_chan;
> struct dma_tx_state state;
> enum dma_status status;
> -
> - spin_lock_irq(&dcmi->irqlock);
> + struct dcmi_buf *buf = dcmi->active;
>
> /* Check DMA status */
> status = dmaengine_tx_status(chan, dcmi->dma_cookie, &state);
> @@ -216,53 +274,18 @@ static void dcmi_dma_callback(void *param)
> case DMA_COMPLETE:
> dev_dbg(dcmi->dev, "%s: Received DMA_COMPLETE\n", __func__);
>
> - if (dcmi->active) {
> - struct dcmi_buf *buf = dcmi->active;
> - struct vb2_v4l2_buffer *vbuf = &dcmi->active->vb;
> -
> - vbuf->sequence = dcmi->sequence++;
> - vbuf->field = V4L2_FIELD_NONE;
> - vbuf->vb2_buf.timestamp = ktime_get_ns();
> - vb2_set_plane_payload(&vbuf->vb2_buf, 0, buf->size);
> - vb2_buffer_done(&vbuf->vb2_buf, VB2_BUF_STATE_DONE);
> - dev_dbg(dcmi->dev, "buffer[%d] done seq=%d\n",
> - vbuf->vb2_buf.index, vbuf->sequence);
> -
> - dcmi->buffers_count++;
> - dcmi->active = NULL;
> - }
> -
> - /* Restart a new DMA transfer with next buffer */
> - if (dcmi->state == RUNNING) {
> - if (list_empty(&dcmi->buffers)) {
> - dev_err(dcmi->dev, "%s: No more buffer queued,
> cannot capture buffer\n",
> - __func__);
> - dcmi->errors_count++;
> - dcmi->active = NULL;
> -
> - spin_unlock_irq(&dcmi->irqlock);
> - return;
> - }
> -
> - dcmi->active = list_entry(dcmi->buffers.next,
> - struct dcmi_buf, list);
> -
> - list_del_init(&dcmi->active->list);
> -
> - spin_unlock_irq(&dcmi->irqlock);
> - if (dcmi_start_capture(dcmi))
> - dev_err(dcmi->dev, "%s: Cannot restart capture
> on DMA complete\n",
> - __func__);
> - return;
> - }
> + /* Return buffer to V4L2 */
> + dcmi_buffer_done(dcmi, buf, buf->size, 0);
>
> + /* Restart capture */
> + if (dcmi_restart_capture(dcmi))
> + dev_err(dcmi->dev, "%s: Cannot restart capture on DMA
> complete\n",
> + __func__);
> break;
> default:
> dev_err(dcmi->dev, "%s: Received unknown status\n", __func__);
> break;
> }
> -
> - spin_unlock_irq(&dcmi->irqlock);
> }
>
> static int dcmi_start_dma(struct stm32_dcmi *dcmi,
> @@ -355,6 +378,52 @@ static void dcmi_set_crop(struct stm32_dcmi *dcmi)
> reg_set(dcmi->regs, DCMI_CR, CR_CROP);
> }
>
> +static void dcmi_process_jpeg(struct stm32_dcmi *dcmi)
> +{
> + struct dma_tx_state state;
> + enum dma_status status;
> + struct dma_chan *chan = dcmi->dma_chan;
> + struct dcmi_buf *buf = dcmi->active;
> +
> + if (!buf)
> + return;
> +
> + /*
> + * Because of variable JPEG buffer size sent by sensor,
> + * DMA transfer never completes due to transfer size
> + * never reached.
> + * In order to ensure that all the JPEG data are transferred
> + * in active buffer memory, DMA is drained.
> + * Then DMA tx status gives the amount of data transferred
> + * to memory, which is then returned to V4L2 through the active
> + * buffer payload.
> + */
> +
> + /* Drain DMA */
> + dmaengine_synchronize(chan);
> +
> + /* Get DMA residue to get JPEG size */
> + status = dmaengine_tx_status(chan, dcmi->dma_cookie, &state);
> + if (status != DMA_ERROR && state.residue < buf->size) {
> + /* Return JPEG buffer to V4L2 with received JPEG buffer size */
> + dcmi_buffer_done(dcmi, buf, buf->size - state.residue, 0);
> + } else {
> + dcmi->errors_count++;
> + dev_err(dcmi->dev, "%s: Cannot get JPEG size from DMA\n",
> + __func__);
> + /* Return JPEG buffer to V4L2 in ERROR state */
> + dcmi_buffer_done(dcmi, buf, 0, -EIO);
> + }
> +
> + /* Abort DMA operation */
> + dmaengine_terminate_all(dcmi->dma_chan);
> +
> + /* Restart capture */
> + if (dcmi_restart_capture(dcmi))
> + dev_err(dcmi->dev, "%s: Cannot restart capture on JPEG
> received\n",
> + __func__);
> +}
> +
> static irqreturn_t dcmi_irq_thread(int irq, void *arg)
> {
> struct stm32_dcmi *dcmi = arg;
> @@ -379,6 +448,14 @@ static irqreturn_t dcmi_irq_thread(int irq, void *arg)
> dcmi->overrun_count++;
> }
>
> + if (dcmi->sd_format->fourcc == V4L2_PIX_FMT_JPEG &&
> + dcmi->misr & IT_FRAME) {
> + /* JPEG received */
> + spin_unlock_irq(&dcmi->irqlock);
> + dcmi_process_jpeg(dcmi);
> + return IRQ_HANDLED;
> + }
> +
> spin_unlock_irq(&dcmi->irqlock);
> return IRQ_HANDLED;
> }
> @@ -552,6 +629,10 @@ static int dcmi_start_streaming(struct vb2_queue *vq,
> unsigned int count)
> if (dcmi->do_crop)
> dcmi_set_crop(dcmi);
>
> + /* Enable jpeg capture */
> + if (dcmi->sd_format->fourcc == V4L2_PIX_FMT_JPEG)
> + reg_set(dcmi->regs, DCMI_CR, CR_CM);/* Snapshot mode */
> +
> /* Enable dcmi */
> reg_set(dcmi->regs, DCMI_CR, CR_ENABLE);
>
> @@ -752,6 +833,7 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct
> v4l2_format *f,
> struct v4l2_subdev_format format = {
> .which = V4L2_SUBDEV_FORMAT_TRY,
> };
> + bool do_crop;
> int ret;
>
> sd_fmt = find_format_by_fourcc(dcmi, pix->pixelformat);
> @@ -761,10 +843,19 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct
> v4l2_format *f,
> }
>
> /* Limit to hardware capabilities */
> - pix->width = clamp(pix->width, MIN_WIDTH, MAX_WIDTH);
> - pix->height = clamp(pix->height, MIN_HEIGHT, MAX_HEIGHT);
> + if (pix->pixelformat == V4L2_PIX_FMT_JPEG) {
> + pix->width = clamp(pix->width, MIN_JPEG_WIDTH, MAX_JPEG_WIDTH);
> + pix->height =
> + clamp(pix->height, MIN_JPEG_HEIGHT, MAX_JPEG_HEIGHT);
> + } else {
> + pix->width = clamp(pix->width, MIN_WIDTH, MAX_WIDTH);
> + pix->height = clamp(pix->height, MIN_HEIGHT, MAX_HEIGHT);
> + }
> +
> + /* No crop if JPEG is requested */
> + do_crop = dcmi->do_crop && (pix->pixelformat != V4L2_PIX_FMT_JPEG);
>
> - if (dcmi->do_crop && dcmi->num_of_sd_framesizes) {
> + if (do_crop && dcmi->num_of_sd_framesizes) {
> struct dcmi_framesize outer_sd_fsize;
> /*
> * If crop is requested and sensor have discrete frame sizes,
> @@ -788,7 +879,7 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct
> v4l2_format *f,
> sd_fsize.width = pix->width;
> sd_fsize.height = pix->height;
>
> - if (dcmi->do_crop) {
> + if (do_crop) {
> struct v4l2_rect c = dcmi->crop;
> struct v4l2_rect max_rect;
>
> @@ -843,6 +934,10 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct
> v4l2_format *f)
> if (ret)
> return ret;
>
> + /* Disable crop if JPEG is requested */
> + if (pix->pixelformat == V4L2_PIX_FMT_JPEG)
> + dcmi->do_crop = false;
> +
> /* pix to mbus format */
> v4l2_fill_mbus_format(mf, pix,
> sd_format->mbus_code);
> @@ -895,6 +990,8 @@ static int dcmi_enum_fmt_vid_cap(struct file *file, void
> *priv,
> return -EINVAL;
>
> f->pixelformat = dcmi->sd_formats[f->index]->fourcc;
> + if (f->pixelformat == V4L2_PIX_FMT_JPEG)
> + f->flags |= V4L2_FMT_FLAG_COMPRESSED;
Not needed, this is done for you in v4l2-ioctl.c.
Regards,
Hans
> return 0;
> }
>
> @@ -1315,6 +1412,10 @@ static int dcmi_set_default_fmt(struct stm32_dcmi
> *dcmi)
> .fourcc = V4L2_PIX_FMT_UYVY,
> .mbus_code = MEDIA_BUS_FMT_UYVY8_2X8,
> .bpp = 2,
> + }, {
> + .fourcc = V4L2_PIX_FMT_JPEG,
> + .mbus_code = MEDIA_BUS_FMT_JPEG_1X8,
> + .bpp = 1,
> },
> };
>
>
