Em Thu, 4 Jan 2018 18:04:12 -0600
Brad Love <b...@nextdimension.cc> escreveu:
> Set appropriate bulk/ISOC transfer multiplier on capture start.
> This sets ISOC transfer to 940 bytes (188 * 5)
> This sets bulk transfer to 48128 bytes (188 * 256)
>
> The above values are maximum allowed according to Empia.
>
> Signed-off-by: Brad Love <b...@nextdimension.cc>
> ---
> drivers/media/usb/em28xx/em28xx-core.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/media/usb/em28xx/em28xx-core.c
> b/drivers/media/usb/em28xx/em28xx-core.c
> index ef38e56..67ed6a3 100644
> --- a/drivers/media/usb/em28xx/em28xx-core.c
> +++ b/drivers/media/usb/em28xx/em28xx-core.c
> @@ -638,6 +638,18 @@ int em28xx_capture_start(struct em28xx *dev, int start)
> dev->chip_id == CHIP_ID_EM28174 ||
> dev->chip_id == CHIP_ID_EM28178) {
> /* The Transport Stream Enable Register moved in em2874 */
> + if (dev->dvb_xfer_bulk) {
> + /* Max Tx Size = 188 * 256 = 48128 - LCM(188,512) * 2 */
> + em28xx_write_reg(dev, (dev->ts == PRIMARY_TS) ?
> + EM2874_R5D_TS1_PKT_SIZE :
> + EM2874_R5E_TS2_PKT_SIZE,
> + 0xFF);
> + } else {
> + /* TS2 Maximum Transfer Size = 188 * 5 */
> + em28xx_write_reg(dev, (dev->ts == PRIMARY_TS) ?
> + EM2874_R5D_TS1_PKT_SIZE :
> + EM2874_R5E_TS2_PKT_SIZE, 0x05);
> + }
Hmm... for ISOC, the USB descriptors inform the max transfer size, with
are detected at probe time, on this part of em28xx_usb_probe:
if (size > dev->dvb_max_pkt_size_isoc) {
has_dvb = true; /* see NOTE (~) */
dev->dvb_ep_isoc = e->bEndpointAddress;
dev->dvb_max_pkt_size_isoc = size;
dev->dvb_alt_isoc = i;
}
If we're touching TS PKT size register, it should somehow be
aligned what's there. I mean, we should either do:
em28xx_write_reg(dev, (dev->ts == PRIMARY_TS) ?
EM2874_R5D_TS1_PKT_SIZE :
EM2874_R5E_TS2_PKT_SIZE,
dev->dvb_max_pkt_size_isoc / 188);
Or the other way around, setting dev->dvb_max_pkt_size_isoc after
writing to EM2874_R5D_TS1_PKT_SIZE or EM2874_R5E_TS2_PKT_SIZE.
Not sure what's more accurate here: the USB descriptors or the
contents of the TS size register. I doubt, I would stick with
the USB descriptor info.
Btw, I wander what happens if we write a bigger value than 5 to those
registers. Would it support a bigger transfer size than 940 for ISOCH?
Cheers,
Mauro
