Hi Hugues,
On Thu, Nov 16, 2017 at 02:41:42PM +0100, Hugues Fruchet wrote:
> Add RGB565 (LE & BE) and YUV422 YUYV format in addition
> to existing YUV422 UYVY format.
>
> Signed-off-by: Hugues Fruchet <[email protected]>
> ---
> drivers/media/i2c/ov5640.c | 79
> +++++++++++++++++++++++++++++++++++++++++-----
> 1 file changed, 71 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> index fb519ad..086a451 100644
> --- a/drivers/media/i2c/ov5640.c
> +++ b/drivers/media/i2c/ov5640.c
> @@ -77,8 +77,10 @@
> #define OV5640_REG_HZ5060_CTRL01 0x3c01
> #define OV5640_REG_SIGMADELTA_CTRL0C 0x3c0c
> #define OV5640_REG_FRAME_CTRL01 0x4202
> +#define OV5640_REG_FORMAT_CONTROL00 0x4300
> #define OV5640_REG_MIPI_CTRL00 0x4800
> #define OV5640_REG_DEBUG_MODE 0x4814
> +#define OV5640_REG_ISP_FORMAT_MUX_CTRL 0x501f
> #define OV5640_REG_PRE_ISP_TEST_SET1 0x503d
> #define OV5640_REG_SDE_CTRL0 0x5580
> #define OV5640_REG_SDE_CTRL1 0x5581
> @@ -106,6 +108,18 @@ enum ov5640_frame_rate {
> OV5640_NUM_FRAMERATES,
> };
>
> +struct ov5640_pixfmt {
> + u32 code;
> + u32 colorspace;
> +};
> +
> +static const struct ov5640_pixfmt ov5640_formats[] = {
> + { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_SRGB, },
> + { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_SRGB, },
> + { MEDIA_BUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB, },
> + { MEDIA_BUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_SRGB, },
> +};
> +
> /*
> * FIXME: remove this when a subdev API becomes available
> * to set the MIPI CSI-2 virtual channel.
> @@ -1798,17 +1812,23 @@ static int ov5640_try_fmt_internal(struct v4l2_subdev
> *sd,
> {
> struct ov5640_dev *sensor = to_ov5640_dev(sd);
> const struct ov5640_mode_info *mode;
> + int i;
>
> mode = ov5640_find_mode(sensor, fr, fmt->width, fmt->height, true);
> if (!mode)
> return -EINVAL;
> -
> fmt->width = mode->width;
> fmt->height = mode->height;
> - fmt->code = sensor->fmt.code;
>
> if (new_mode)
> *new_mode = mode;
> +
> + for (i = 0; i < ARRAY_SIZE(ov5640_formats); i++)
> + if (ov5640_formats[i].code == fmt->code)
> + break;
> + if (i >= ARRAY_SIZE(ov5640_formats))
> + fmt->code = ov5640_formats[0].code;
> +
> return 0;
> }
>
> @@ -1851,6 +1871,49 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
> return ret;
> }
>
> +static int ov5640_set_framefmt(struct ov5640_dev *sensor,
> + struct v4l2_mbus_framefmt *format)
> +{
> + int ret = 0;
> + bool is_rgb = false;
> + u8 val;
> +
> + switch (format->code) {
> + case MEDIA_BUS_FMT_UYVY8_2X8:
> + /* YUV422, UYVY */
> + val = 0x3f;
> + break;
> + case MEDIA_BUS_FMT_YUYV8_2X8:
> + /* YUV422, YUYV */
> + val = 0x30;
> + break;
> + case MEDIA_BUS_FMT_RGB565_2X8_LE:
> + /* RGB565 {g[2:0],b[4:0]},{r[4:0],g[5:3]} */
> + val = 0x6F;
> + is_rgb = true;
> + break;
> + case MEDIA_BUS_FMT_RGB565_2X8_BE:
> + /* RGB565 {r[4:0],g[5:3]},{g[2:0],b[4:0]} */
> + val = 0x61;
> + is_rgb = true;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + /* FORMAT CONTROL00: YUV and RGB formatting */
> + ret = ov5640_write_reg(sensor, OV5640_REG_FORMAT_CONTROL00, val);
> + if (ret)
> + return ret;
> +
> + /* FORMAT MUX CONTROL: ISP YUV or RGB */
> + ret = ov5640_write_reg(sensor, OV5640_REG_ISP_FORMAT_MUX_CTRL,
> + is_rgb ? 0x01 : 0x00);
return ov5640...;
> + if (ret)
> + return ret;
> +
> + return ret;
> +}
>
> /*
> * Sensor Controls.
> @@ -2236,15 +2299,12 @@ static int ov5640_enum_mbus_code(struct v4l2_subdev
> *sd,
> struct v4l2_subdev_pad_config *cfg,
> struct v4l2_subdev_mbus_code_enum *code)
> {
> - struct ov5640_dev *sensor = to_ov5640_dev(sd);
> -
> if (code->pad != 0)
> return -EINVAL;
> - if (code->index != 0)
> + if (code->index >= ARRAY_SIZE(ov5640_formats))
> return -EINVAL;
>
> - code->code = sensor->fmt.code;
> -
> + code->code = ov5640_formats[code->index].code;
> return 0;
> }
>
> @@ -2254,12 +2314,15 @@ static int ov5640_s_stream(struct v4l2_subdev *sd,
> int enable)
> int ret = 0;
>
> mutex_lock(&sensor->lock);
> -
I rather liked this newline!
> if (sensor->streaming == !enable) {
> if (enable && sensor->pending_mode_change) {
> ret = ov5640_set_mode(sensor, sensor->current_mode);
> if (ret)
> goto out;
> +
> + ret = ov5640_set_framefmt(sensor, &sensor->fmt);
> + if (ret)
> + goto out;
> }
>
> if (sensor->ep.bus_type == V4L2_MBUS_CSI2)
--
Sakari Ailus
e-mail: [email protected]
