Hi Mauro,
Without the ktime_t accessor functions, the pre-v4.10 media_build broken.
Also there is a fix for the serial_ir on 32-bit builds.
Please merge where you see fit.
Thanks
Sean
The following changes since commit 0779b8855c746c90b85bfe6e16d5dfa2a6a46655:
media: ddbridge: fix semicolon.cocci warnings (2017-08-20 10:25:22 -0400)
are available in the git repository at:
git://linuxtv.org/syoung/media_tree.git for-v4.14c
for you to fetch changes up to e4ea3e4bd643d133a5a3e7b708a7c7cf0f93586e:
media: serial_ir: fix tx timing calculation on 32-bit (2017-08-26 09:26:29
+0100)
----------------------------------------------------------------
Jasmin Jessich (1):
media: rc: use ktime accessor functions
Sean Young (2):
media: rc: gpio-ir-tx: use ktime accessor functions
media: serial_ir: fix tx timing calculation on 32-bit
drivers/media/rc/gpio-ir-tx.c | 12 +++++++-----
drivers/media/rc/rc-ir-raw.c | 11 ++++++-----
drivers/media/rc/serial_ir.c | 34 ++++++++++++++--------------------
3 files changed, 27 insertions(+), 30 deletions(-)
diff --git a/drivers/media/rc/gpio-ir-tx.c b/drivers/media/rc/gpio-ir-tx.c
index 0b83408a2e18..cd476cab9782 100644
--- a/drivers/media/rc/gpio-ir-tx.c
+++ b/drivers/media/rc/gpio-ir-tx.c
@@ -98,15 +98,17 @@ static int gpio_ir_tx(struct rc_dev *dev, unsigned int
*txbuf,
// pulse
ktime_t last = ktime_add_us(edge, txbuf[i]);
- while (ktime_get() < last) {
+ while (ktime_before(ktime_get(), last)) {
gpiod_set_value(gpio_ir->gpio, 1);
- edge += pulse;
- delta = edge - ktime_get();
+ edge = ktime_add_ns(edge, pulse);
+ delta = ktime_to_ns(ktime_sub(edge,
+ ktime_get()));
if (delta > 0)
ndelay(delta);
gpiod_set_value(gpio_ir->gpio, 0);
- edge += space;
- delta = edge - ktime_get();
+ edge = ktime_add_ns(edge, space);
+ delta = ktime_to_ns(ktime_sub(edge,
+ ktime_get()));
if (delta > 0)
ndelay(delta);
}
diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c
index f495709e28fb..503bc425a187 100644
--- a/drivers/media/rc/rc-ir-raw.c
+++ b/drivers/media/rc/rc-ir-raw.c
@@ -106,7 +106,7 @@ int ir_raw_event_store_edge(struct rc_dev *dev, bool pulse)
return -EINVAL;
now = ktime_get();
- ev.duration = ktime_sub(now, dev->raw->last_event);
+ ev.duration = ktime_to_ns(ktime_sub(now, dev->raw->last_event));
ev.pulse = !pulse;
rc = ir_raw_event_store(dev, &ev);
@@ -474,18 +474,19 @@ EXPORT_SYMBOL(ir_raw_encode_scancode);
static void edge_handle(unsigned long arg)
{
struct rc_dev *dev = (struct rc_dev *)arg;
- ktime_t interval = ktime_get() - dev->raw->last_event;
+ ktime_t interval = ktime_sub(ktime_get(), dev->raw->last_event);
- if (interval >= dev->timeout) {
+ if (ktime_to_ns(interval) >= dev->timeout) {
DEFINE_IR_RAW_EVENT(ev);
ev.timeout = true;
- ev.duration = interval;
+ ev.duration = ktime_to_ns(interval);
ir_raw_event_store(dev, &ev);
} else {
mod_timer(&dev->raw->edge_handle,
- jiffies + nsecs_to_jiffies(dev->timeout - interval));
+ jiffies + nsecs_to_jiffies(dev->timeout -
+ ktime_to_ns(interval)));
}
ir_raw_event_handle(dev);
diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
index 4b8d5f38baf6..8b66926bc16a 100644
--- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -139,10 +139,8 @@ struct serial_ir {
struct platform_device *pdev;
struct timer_list timeout_timer;
- unsigned int freq;
+ unsigned int carrier;
unsigned int duty_cycle;
-
- unsigned int pulse_width, space_width;
};
static struct serial_ir serial_ir;
@@ -183,18 +181,6 @@ static void off(void)
soutp(UART_MCR, hardware[type].off);
}
-static void init_timing_params(unsigned int new_duty_cycle,
- unsigned int new_freq)
-{
- serial_ir.duty_cycle = new_duty_cycle;
- serial_ir.freq = new_freq;
-
- serial_ir.pulse_width = DIV_ROUND_CLOSEST(
- new_duty_cycle * NSEC_PER_SEC, new_freq * 100l);
- serial_ir.space_width = DIV_ROUND_CLOSEST(
- (100l - new_duty_cycle) * NSEC_PER_SEC, new_freq * 100l);
-}
-
static void send_pulse_irdeo(unsigned int length, ktime_t target)
{
long rawbits;
@@ -241,13 +227,20 @@ static void send_pulse_homebrew_softcarrier(unsigned int
length, ktime_t edge)
* ndelay(s64) does not compile; so use s32 rather than s64.
*/
s32 delta;
+ unsigned int pulse, space;
+
+ /* Ensure the dividend fits into 32 bit */
+ pulse = DIV_ROUND_CLOSEST(serial_ir.duty_cycle * (NSEC_PER_SEC / 100),
+ serial_ir.carrier);
+ space = DIV_ROUND_CLOSEST((100 - serial_ir.duty_cycle) *
+ (NSEC_PER_SEC / 100), serial_ir.carrier);
for (;;) {
now = ktime_get();
if (ktime_compare(now, target) >= 0)
break;
on();
- edge = ktime_add_ns(edge, serial_ir.pulse_width);
+ edge = ktime_add_ns(edge, pulse);
delta = ktime_to_ns(ktime_sub(edge, now));
if (delta > 0)
ndelay(delta);
@@ -255,7 +248,7 @@ static void send_pulse_homebrew_softcarrier(unsigned int
length, ktime_t edge)
off();
if (ktime_compare(now, target) >= 0)
break;
- edge = ktime_add_ns(edge, serial_ir.space_width);
+ edge = ktime_add_ns(edge, space);
delta = ktime_to_ns(ktime_sub(edge, now));
if (delta > 0)
ndelay(delta);
@@ -580,7 +573,8 @@ static int serial_ir_probe(struct platform_device *dev)
return result;
/* Initialize pulse/space widths */
- init_timing_params(50, 38000);
+ serial_ir.duty_cycle = 50;
+ serial_ir.carrier = 38000;
/* If pin is high, then this must be an active low receiver. */
if (sense == -1) {
@@ -684,7 +678,7 @@ static int serial_ir_tx(struct rc_dev *dev, unsigned int
*txbuf,
static int serial_ir_tx_duty_cycle(struct rc_dev *dev, u32 cycle)
{
- init_timing_params(cycle, serial_ir.freq);
+ serial_ir.duty_cycle = cycle;
return 0;
}
@@ -693,7 +687,7 @@ static int serial_ir_tx_carrier(struct rc_dev *dev, u32
carrier)
if (carrier > 500000 || carrier < 20000)
return -EINVAL;
- init_timing_params(serial_ir.duty_cycle, carrier);
+ serial_ir.carrier = carrier;
return 0;
}
