Hi Yong,
On Sat, Apr 29, 2017 at 06:34:36PM -0500, Yong Zhi wrote:
...
> +static int cio2_pci_probe(struct pci_dev *pci_dev,
> + const struct pci_device_id *id)
> +{
> + struct cio2_device *cio2;
> + phys_addr_t phys;
> + void __iomem *const *iomap;
> + int i = -1, r = -ENODEV;
> +
> + cio2 = devm_kzalloc(&pci_dev->dev, sizeof(*cio2), GFP_KERNEL);
> + if (!cio2)
> + return -ENOMEM;
> + cio2->pci_dev = pci_dev;
> +
> + r = pcim_enable_device(pci_dev);
> + if (r) {
> + dev_err(&pci_dev->dev, "failed to enable device (%d)\n", r);
> + return r;
> + }
> +
> + dev_info(&pci_dev->dev, "device 0x%x (rev: 0x%x)\n",
> + pci_dev->device, pci_dev->revision);
> +
> + phys = pci_resource_start(pci_dev, CIO2_PCI_BAR);
> +
> + r = pcim_iomap_regions(pci_dev, 1 << CIO2_PCI_BAR, pci_name(pci_dev));
> + if (r) {
> + dev_err(&pci_dev->dev, "failed to remap I/O memory (%d)\n", r);
> + return -ENODEV;
> + }
> +
> + iomap = pcim_iomap_table(pci_dev);
> + if (!iomap) {
> + dev_err(&pci_dev->dev, "failed to iomap table\n");
> + return -ENODEV;
> + }
> +
> + cio2->base = iomap[CIO2_PCI_BAR];
> +
> + pci_set_drvdata(pci_dev, cio2);
> +
> + pci_set_master(pci_dev);
> +
> + r = pci_set_dma_mask(pci_dev, CIO2_DMA_MASK);
> + if (r) {
> + dev_err(&pci_dev->dev, "failed to set DMA mask (%d)\n", r);
> + return -ENODEV;
> + }
> +
> + r = cio2_pci_config_setup(pci_dev);
> + if (r)
> + return -ENODEV;
> +
> + mutex_init(&cio2->lock);
> +
> + cio2->media_dev.dev = &cio2->pci_dev->dev;
> + strlcpy(cio2->media_dev.model, CIO2_DEVICE_NAME,
> + sizeof(cio2->media_dev.model));
> + snprintf(cio2->media_dev.bus_info, sizeof(cio2->media_dev.bus_info),
> + "PCI:%s", pci_name(cio2->pci_dev));
> + cio2->media_dev.driver_version = KERNEL_VERSION(4, 11, 0);
> + cio2->media_dev.hw_revision = 0;
> +
> + media_device_init(&cio2->media_dev);
> + r = media_device_register(&cio2->media_dev);
> + if (r < 0)
> + goto fail_mutex_destroy;
> +
> + cio2->v4l2_dev.mdev = &cio2->media_dev;
> + r = v4l2_device_register(&pci_dev->dev, &cio2->v4l2_dev);
> + if (r) {
> + dev_err(&pci_dev->dev,
> + "failed to register V4L2 device (%d)\n", r);
> + goto fail_mutex_destroy;
> + }
> +
> + for (i = 0; i < CIO2_QUEUES; i++) {
> + r = cio2_queue_init(cio2, &cio2->queue[i]);
> + if (r)
> + goto fail;
> + }
> +
> + r = cio2_fbpt_init_dummy(cio2);
> + if (r)
> + goto fail;
> +
> + /* Register notifier for subdevices we care */
> + r = cio2_notifier_init(cio2);
> + if (r)
> + goto fail;
> +
> + r = devm_request_irq(&pci_dev->dev, pci_dev->irq, cio2_irq,
> + IRQF_SHARED, CIO2_NAME, cio2);
> + if (r) {
> + dev_err(&pci_dev->dev, "failed to request IRQ (%d)\n", r);
> + goto fail;
> + }
> +
> + pm_runtime_put_noidle(&pci_dev->dev);
> + pm_runtime_allow(&pci_dev->dev);
For PCI devices pm_runtime_put_noidle() is enough. No need to call
pm_runtime_allow(). Likewise, pm_runtime_get_noresume() is called in driver
remove function.
> +
> + return 0;
> +
> +fail:
> + cio2_notifier_exit(cio2);
> + cio2_fbpt_exit_dummy(cio2);
> + for (; i >= 0; i--)
> + cio2_queue_exit(cio2, &cio2->queue[i]);
> + v4l2_device_unregister(&cio2->v4l2_dev);
> + media_device_unregister(&cio2->media_dev);
> + media_device_cleanup(&cio2->media_dev);
> +fail_mutex_destroy:
> + mutex_destroy(&cio2->lock);
> +
> + return r;
> +}
> +
> +static void cio2_pci_remove(struct pci_dev *pci_dev)
> +{
> + struct cio2_device *cio2 = pci_get_drvdata(pci_dev);
> + unsigned int i;
> +
> + cio2_notifier_exit(cio2);
> + cio2_fbpt_exit_dummy(cio2);
> + for (i = 0; i < CIO2_QUEUES; i++)
> + cio2_queue_exit(cio2, &cio2->queue[i]);
> + v4l2_device_unregister(&cio2->v4l2_dev);
> + media_device_unregister(&cio2->media_dev);
> + media_device_cleanup(&cio2->media_dev);
> + mutex_destroy(&cio2->lock);
> +}
--
Regards,
Sakari Ailus
e-mail: sakari.ai...@iki.fi XMPP: sai...@retiisi.org.uk
