Hi Laurent,
On Fri, Apr 07, 2017 at 12:44:27PM +0300, Laurent Pinchart wrote:
> Hi Sakari,
>
> Thank you for the patch.
>
> On Thursday 06 Apr 2017 16:12:04 Sakari Ailus wrote:
> > The fwnode_handle is a more generic way than OF device_node to describe
> > firmware nodes. Instead of the OF API, use more generic fwnode API to
> > obtain the same information.
>
> I would mention that this is a copy of v4l2-of.c with the OF API replaced
> with
> the fwnode API.
I'll add that to the description.
>
> > As the V4L2 fwnode support will be required by a small minority of e.g.
> > ACPI based systems (the same might actually go for OF), make this a module
> > instead of embedding it in the videodev module.
> >
> > Signed-off-by: Sakari Ailus <sakari.ai...@linux.intel.com>
> > ---
> > drivers/media/v4l2-core/Kconfig | 3 +
> > drivers/media/v4l2-core/Makefile | 1 +
> > drivers/media/v4l2-core/v4l2-fwnode.c | 353 +++++++++++++++++++++++++++++++
> > include/media/v4l2-fwnode.h | 104 ++++++++++
> > 4 files changed, 461 insertions(+)
> > create mode 100644 drivers/media/v4l2-core/v4l2-fwnode.c
> > create mode 100644 include/media/v4l2-fwnode.h
> >
> > diff --git a/drivers/media/v4l2-core/Kconfig
> > b/drivers/media/v4l2-core/Kconfig index 6b1b78f..a35c336 100644
> > --- a/drivers/media/v4l2-core/Kconfig
> > +++ b/drivers/media/v4l2-core/Kconfig
> > @@ -55,6 +55,9 @@ config V4L2_FLASH_LED_CLASS
> >
> > When in doubt, say N.
> >
> > +config V4L2_FWNODE
> > + tristate
> > +
> > # Used by drivers that need Videobuf modules
> > config VIDEOBUF_GEN
> > tristate
> > diff --git a/drivers/media/v4l2-core/Makefile
> > b/drivers/media/v4l2-core/Makefile index 795a535..cf77a63 100644
> > --- a/drivers/media/v4l2-core/Makefile
> > +++ b/drivers/media/v4l2-core/Makefile
> > @@ -13,6 +13,7 @@ endif
> > ifeq ($(CONFIG_OF),y)
> > videodev-objs += v4l2-of.o
> > endif
> > +obj-$(CONFIG_V4L2_FWNODE) += v4l2-fwnode.o
> > ifeq ($(CONFIG_TRACEPOINTS),y)
> > videodev-objs += vb2-trace.o v4l2-trace.o
> > endif
> > diff --git a/drivers/media/v4l2-core/v4l2-fwnode.c
> > b/drivers/media/v4l2-core/v4l2-fwnode.c new file mode 100644
> > index 0000000..4f69b11
> > --- /dev/null
> > +++ b/drivers/media/v4l2-core/v4l2-fwnode.c
> > @@ -0,0 +1,353 @@
> > +/*
> > + * V4L2 fwnode binding parsing library
> > + *
> > + * Copyright (c) 2016 Intel Corporation.
> > + * Author: Sakari Ailus <sakari.ai...@linux.intel.com>
> > + *
> > + * Copyright (C) 2012 - 2013 Samsung Electronics Co., Ltd.
> > + * Author: Sylwester Nawrocki <s.nawro...@samsung.com>
> > + *
> > + * Copyright (C) 2012 Renesas Electronics Corp.
> > + * Author: Guennadi Liakhovetski <g.liakhovet...@gmx.de>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of version 2 of the GNU General Public License as
> > + * published by the Free Software Foundation.
> > + */
> > +#include <linux/acpi.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/property.h>
> > +#include <linux/slab.h>
> > +#include <linux/string.h>
> > +#include <linux/types.h>
> > +
> > +#include <media/v4l2-fwnode.h>
> > +
> > +static int v4l2_fwnode_endpoint_parse_csi_bus(struct fwnode_handle *fwn,
> > + struct v4l2_fwnode_endpoint
> *vfwn)
> > +{
> > + struct v4l2_fwnode_bus_mipi_csi2 *bus = &vfwn->bus.mipi_csi2;
> > + bool have_clk_lane = false;
> > + unsigned int flags = 0, lanes_used = 0;
> > + unsigned int i;
> > + u32 v;
> > + int rval;
>
> I would have used "ret" instead of "rval" ;-)
I know. But
1) there's no established convention in the file and
2) "rval" has the benefit is easier to look up; one doesn't find a plethora
of "return something". Therefore it is better than "ret" for the purpose.
>
> > + rval = fwnode_property_read_u32_array(fwn, "data-lanes", NULL, 0);
> > + if (rval > 0) {
> > + u32 array[ARRAY_SIZE(bus->data_lanes)];
> > +
> > + bus->num_data_lanes =
> > + min_t(int, ARRAY_SIZE(bus->data_lanes), rval);
> > +
> > + fwnode_property_read_u32_array(
> > + fwn, "data-lanes", array, bus->num_data_lanes);
>
> Is there anything wrong with the usual way to wrap code ?
>
> fwnode_property_read_u32_array(fwn, "data-lanes", array,
> bus->num_data_lanes);
I'll change the occurrences of that whenever feasible.
>
> > +
> > + for (i = 0; i < bus->num_data_lanes; i++) {
> > + if (lanes_used & BIT(array[i]))
> > + pr_warn("duplicated lane %u in data-lanes\n",
> > + array[i]);
> > + lanes_used |= BIT(array[i]);
> > +
> > + bus->data_lanes[i] = array[i];
> > + }
> > + }
> > +
> > + rval = fwnode_property_read_u32_array(fwn, "lane-polarities", NULL,
> 0);
> > + if (rval > 0) {
> > + u32 array[ARRAY_SIZE(bus->lane_polarities)];
> > +
> > + if (rval < 1 + bus->num_data_lanes /* clock + data */) {
> > + pr_warn("too few lane-polarities entries (need %u, got
> %u)\n",
> > + 1 + bus->num_data_lanes, rval);
> > + return -EINVAL;
> > + }
> > +
> > + fwnode_property_read_u32_array(
> > + fwn, "lane-polarities", array, 1 + bus-
> >num_data_lanes);
>
> Ditto with
>
> fwnode_property_read_u32_array(fwn, "lane-polarities", array,
> 1 + bus->num_data_lanes);
>
> > + for (i = 0; i < 1 + bus->num_data_lanes; i++)
> > + bus->lane_polarities[i] = array[i];
> > + }
> > +
> > + if (!fwnode_property_read_u32(fwn, "clock-lanes", &v)) {
> > + if (lanes_used & BIT(v))
> > + pr_warn("duplicated lane %u in clock-lanes\n", v);
> > + lanes_used |= BIT(v);
> > +
> > + bus->clock_lane = v;
> > + have_clk_lane = true;
> > + }
> > +
> > + if (fwnode_property_present(fwn, "clock-noncontinuous"))
> > + flags |= V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
> > + else if (have_clk_lane || bus->num_data_lanes > 0)
> > + flags |= V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
> > +
> > + bus->flags = flags;
> > + vfwn->bus_type = V4L2_MBUS_CSI2;
> > +
> > + return 0;
> > +}
> > +
> > +static void v4l2_fwnode_endpoint_parse_parallel_bus(
> > + struct fwnode_handle *fwn, struct v4l2_fwnode_endpoint *vfwn)
> > +{
> > + struct v4l2_fwnode_bus_parallel *bus = &vfwn->bus.parallel;
> > + unsigned int flags = 0;
> > + u32 v;
> > +
> > + if (!fwnode_property_read_u32(fwn, "hsync-active", &v))
> > + flags |= v ? V4L2_MBUS_HSYNC_ACTIVE_HIGH :
> > + V4L2_MBUS_HSYNC_ACTIVE_LOW;
> > +
> > + if (!fwnode_property_read_u32(fwn, "vsync-active", &v))
> > + flags |= v ? V4L2_MBUS_VSYNC_ACTIVE_HIGH :
> > + V4L2_MBUS_VSYNC_ACTIVE_LOW;
> > +
> > + if (!fwnode_property_read_u32(fwn, "field-even-active", &v))
> > + flags |= v ? V4L2_MBUS_FIELD_EVEN_HIGH :
> > + V4L2_MBUS_FIELD_EVEN_LOW;
> > + if (flags)
> > + vfwn->bus_type = V4L2_MBUS_PARALLEL;
> > + else
> > + vfwn->bus_type = V4L2_MBUS_BT656;
> > +
> > + if (!fwnode_property_read_u32(fwn, "pclk-sample", &v))
> > + flags |= v ? V4L2_MBUS_PCLK_SAMPLE_RISING :
> > + V4L2_MBUS_PCLK_SAMPLE_FALLING;
> > +
> > + if (!fwnode_property_read_u32(fwn, "data-active", &v))
> > + flags |= v ? V4L2_MBUS_DATA_ACTIVE_HIGH :
> > + V4L2_MBUS_DATA_ACTIVE_LOW;
> > +
> > + if (fwnode_property_present(fwn, "slave-mode"))
> > + flags |= V4L2_MBUS_SLAVE;
> > + else
> > + flags |= V4L2_MBUS_MASTER;
> > +
> > + if (!fwnode_property_read_u32(fwn, "bus-width", &v))
> > + bus->bus_width = v;
> > +
> > + if (!fwnode_property_read_u32(fwn, "data-shift", &v))
> > + bus->data_shift = v;
> > +
> > + if (!fwnode_property_read_u32(fwn, "sync-on-green-active", &v))
> > + flags |= v ? V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH :
> > + V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW;
> > +
> > + bus->flags = flags;
> > +
> > +}
> > +
> > +/**
> > + * v4l2_fwnode_endpoint_parse() - parse all fwnode node properties
> > + * @fwn: pointer to fwnode_handle
>
> I would say "the endpoint's fwnode handle", or "pointer to the endpoint's
> fwnode handle". Otherwise which fwnode handle should be passed won't be clear.
I prefer the latter.
>
> > + * @vfwn: pointer to the V4L2 fwnode data structure
> > + *
> > + * All properties are optional. If none are found, we don't set any flags.
> > + * This means the port has a static configuration and no properties have
> > + * to be specified explicitly.
> > + * If any properties that identify the bus as parallel are found and
> > + * slave-mode isn't set, we set V4L2_MBUS_MASTER. Similarly, if we
> > recognise
> > + * the bus as serial CSI-2 and clock-noncontinuous isn't set, we set the
> > + * V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag.
> > + * The caller should hold a reference to @node.
>
> s/@node/@fwn/
>
> By the way, have you tried to compile the documentation ?
I have, but I may have made changes since that. I'll test that again before
submitting the next version.
>
> > + *
> > + * NOTE: This function does not parse properties the size of which is
> > + * variable without a low fixed limit. Please use
> > + * v4l2_fwnode_endpoint_alloc_parse() in new drivers instead.
> > + *
> > + * Return: 0 on success or a negative error code on failure.
> > + */
> > +int v4l2_fwnode_endpoint_parse(struct fwnode_handle *fwn,
> > + struct v4l2_fwnode_endpoint *vfwn)
>
> Is there a specific reason not to keep the original parameter name "endpoint"
> ? vfwn seems to stand for v4l2_fwnode, not v4l2_fwnode_endpoint. Same comment
> for all other locations in this patch.
I'm ok with keeping endpoint.
>
> > +{
> > + int rval;
> > +
> > + fwnode_graph_parse_endpoint(fwn, &vfwn->base);
> > +
> > + /* Zero fields from bus_type to until the end */
> > + memset(&vfwn->bus_type, 0, sizeof(*vfwn) -
> > + offsetof(typeof(*vfwn), bus_type));
> > +
> > + rval = v4l2_fwnode_endpoint_parse_csi_bus(fwn, vfwn);
> > + if (rval)
> > + return rval;
> > + /*
> > + * Parse the parallel video bus properties only if none
> > + * of the MIPI CSI-2 specific properties were found.
> > + */
> > + if (vfwn->bus.mipi_csi2.flags == 0)
> > + v4l2_fwnode_endpoint_parse_parallel_bus(fwn, vfwn);
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL(v4l2_fwnode_endpoint_parse);
>
> According to Mauro in
> http://www.mail-archive.com/linux-media@vger.kernel.org/msg110809.html you
> should use EXPORT_SYMBOL_GPL.
EXPORT_SYMBOL() was used by v4l2-of.c; I'll switch here.
>
> > +
> > +/*
> > + * v4l2_fwnode_endpoint_free() - free the V4L2 fwnode acquired by
> > + * v4l2_fwnode_endpoint_alloc_parse()
> > + * @fwn - the V4L2 fwnode the resources of which are to be released
>
> Mayeb "the V4L2 fwnode whose resources are to be released" ?
>
> > + *
> > + * It is safe to call this function with NULL argument or on an
>
> s/on an/on a/
Yes.
>
> > + * V4L2 fwnode the parsing of which failed.
>
> "whose parsing failed" ?
Any particular reason? Do you like "whose"? :-)
>
> > + */
> > +void v4l2_fwnode_endpoint_free(struct v4l2_fwnode_endpoint *vfwn)
> > +{
> > + if (IS_ERR_OR_NULL(vfwn))
> > + return;
> > +
> > + kfree(vfwn->link_frequencies);
> > + kfree(vfwn);
> > +}
> > +EXPORT_SYMBOL(v4l2_fwnode_endpoint_free);
> > +
> > +/**
> > + * v4l2_fwnode_endpoint_alloc_parse() - parse all fwnode node properties
> > + * @node: pointer to fwnode_handle
>
> s/@node/@fwn/
>
> Here too, I would say "the endpoint's fwnode handle", or "pointer to the
> endpoint's fwnode handle".
I'll use the latter.
>
> > + *
> > + * All properties are optional. If none are found, we don't set any flags.
> > + * This means the port has a static configuration and no properties have
> > + * to be specified explicitly.
> > + * If any properties that identify the bus as parallel are found and
> > + * slave-mode isn't set, we set V4L2_MBUS_MASTER. Similarly, if we
> > recognise
> > + * the bus as serial CSI-2 and clock-noncontinuous isn't set, we set the
> > + * V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag.
> > + * The caller should hold a reference to @node.
>
> s/@node/@fwn/
Will fix.
>
> > + *
> > + * v4l2_fwnode_endpoint_alloc_parse() has two important differences to
> > + * v4l2_fwnode_endpoint_parse():
> > + *
> > + * 1. It also parses variable size data and
>
> Nitpicking, a valid sentence doesn't end with "and$". You could write
>
> 1. It also parses variable size data.
> 2. The memory it has allocated to store the variable size data must
> be freed using v4l2_fwnode_endpoint_free() when no longer needed.
I prefer this one, will change.
>
> or
>
> 1. it also parses variable size data; and
> 2. the memory it has allocated to store the variable size data must
> be freed using v4l2_fwnode_endpoint_free() when no longer needed.
>
> > + *
> > + * 2. The memory it has allocated to store the variable size data must
> > + * be freed using v4l2_fwnode_endpoint_free() when no longer needed.
> > + *
> > + * Return: Pointer to v4l2_fwnode_endpoint if successful, on error a
> > + * negative error code.
>
> The function returns an error pointer on error.
Yes, I'll improve the documentation.
>
> > + */
> > +struct v4l2_fwnode_endpoint *v4l2_fwnode_endpoint_alloc_parse(
> > + struct fwnode_handle *fwn)
> > +{
> > + struct v4l2_fwnode_endpoint *vfwn;
> > + int rval;
>
> ret ? :-)
>
> > +
> > + vfwn = kzalloc(sizeof(*vfwn), GFP_KERNEL);
> > + if (!vfwn)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + rval = v4l2_fwnode_endpoint_parse(fwn, vfwn);
> > + if (rval < 0)
> > + goto out_err;
> > +
> > + rval = fwnode_property_read_u64_array(fwn, "link-frequencies",
> > + NULL, 0);
> > +
>
> No need for a blank line.
Indeed.
>
> > + if (rval < 0)
> > + goto out_err;
> > +
> > + vfwn->link_frequencies =
> > + kmalloc_array(rval, sizeof(*vfwn->link_frequencies),
> > + GFP_KERNEL);
> > + if (!vfwn->link_frequencies) {
> > + rval = -ENOMEM;
> > + goto out_err;
> > + }
> > +
> > + vfwn->nr_of_link_frequencies = rval;
> > +
> > + rval = fwnode_property_read_u64_array(
> > + fwn, "link-frequencies", vfwn->link_frequencies,
> > + vfwn->nr_of_link_frequencies);
>
> rval = fwnode_property_read_u64_array(fwn, "link-frequencies",
> vfwn->link_frequencies,
> vfwn->nr_of_link_frequencies);
>
> > + if (rval < 0)
> > + goto out_err;
> > +
> > + return vfwn;
> > +
> > +out_err:
> > + v4l2_fwnode_endpoint_free(vfwn);
> > + return ERR_PTR(rval);
> > +}
> > +EXPORT_SYMBOL(v4l2_fwnode_endpoint_alloc_parse);
> > +
> > +/**
> > + * v4l2_fwnode_endpoint_parse_link() - parse a link between two endpoints
> > + * @node: pointer to the fwnode at the local end of the link
>
> The parameter is called __fwn. I believe you should rename it to fwn,
> otherwise the documentation will look weird.
>
> As explained before, you should mention that this is an endpoint fwnode
> handle.
Agreed.
>
> > + * @link: pointer to the V4L2 fwnode link data structure
> > + *
> > + * Fill the link structure with the local and remote nodes and port
> > numbers.
> > + * The local_node and remote_node fields are set to point to the local and
> > + * remote port's parent nodes respectively (the port parent node being the
> > + * parent node of the port node if that node isn't a 'ports' node, or the
> > + * grand-parent node of the port node otherwise).
> > + *
> > + * A reference is taken to both the local and remote nodes, the caller
> > + * must use v4l2_fwnode_endpoint_put_link() to drop the references
> > + * when done with the link.
>
> Just curious, is there a reason to wrap earlier than the 80 columns limit ?
>
> * A reference is taken to both the local and remote nodes, the caller must
> use
> * v4l2_fwnode_endpoint_put_link() to drop the references when done with the
> * link.
>
> would work.
It is like a speed limit, you can perfectly legally drive slower than 80
characters per line, right? :-)
Albeit the conditions seem pretty good in this file, I can try pushing it
closer to the limit.
>
> > + * Return: 0 on success, or -ENOLINK if the remote fwnode can't be found.
>
> Here too you should mention remote endpoint.
Oh yes.
>
> > + */
> > +int v4l2_fwnode_parse_link(struct fwnode_handle *__fwn,
> > + struct v4l2_fwnode_link *link)
> > +{
> > + struct fwnode_handle *fwn;
> > + const char *port_prop = is_of_node(__fwn) ? "reg" : "port";
> > +
> > + memset(link, 0, sizeof(*link));
> > +
> > + fwn = fwnode_get_parent(__fwn);
> > + fwnode_property_read_u32(fwn, port_prop, &link->local_port);
> > + fwn = fwnode_get_next_parent(fwn);
> > + if (is_of_node(fwn)) {
> > + if (of_node_cmp(to_of_node(fwn)->name, "ports") == 0)
> > + fwn = fwnode_get_next_parent(fwn);
> > + } else {
> > + /* The "ports" node is always there in ACPI. */
> > + fwn = fwnode_get_next_parent(fwn);
> > + }
>
> To avoid duplicating the fwnode_get_next_parent(fwn) call, you could write
>
> if (!is_of_node(fwn) ||
> of_node_cmp(to_of_node(fwn)->name, "ports") == 0) {
> /* The "ports" node is always there in ACPI. */
> fwn = fwnode_get_next_parent(fwn);
> }
Will change.
>
> > + link->local_node = fwn;
> > +
> > + fwn = fwnode_graph_get_remote_endpoint(fwn);
> > + if (!fwn) {
> > + fwnode_handle_put(fwn);
> > + return -ENOLINK;
> > + }
> > +
> > + fwn = fwnode_get_parent(fwn);
> > + fwnode_property_read_u32(fwn, port_prop, &link->remote_port);
> > + fwn = fwnode_get_next_parent(fwn);
> > + if (is_of_node(fwn)) {
> > + if (of_node_cmp(to_of_node(fwn)->name, "ports") == 0)
> > + fwn = fwnode_get_next_parent(fwn);
> > + } else {
> > + /* The "ports" node is always there in ACPI. */
> > + fwn = fwnode_get_next_parent(fwn);
> > + }
>
> Same comment here.
>
> > + link->remote_node = fwn;
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL(v4l2_fwnode_parse_link);
> > +
> > +/**
> > + * v4l2_fwnode_put_link() - drop references to nodes in a link
> > + * @link: pointer to the V4L2 fwnode link data structure
> > + *
> > + * Drop references to the local and remote nodes in the link. This
> > + * function must be called on every link parsed with
> > + * v4l2_fwnode_parse_link().
> > + */
> > +void v4l2_fwnode_put_link(struct v4l2_fwnode_link *link)
> > +{
> > + fwnode_handle_put(link->local_node);
> > + fwnode_handle_put(link->remote_node);
> > +}
> > +EXPORT_SYMBOL(v4l2_fwnode_put_link);
> > +
> > +MODULE_LICENSE("GPL");
> > +MODULE_AUTHOR("Sakari Ailus <sakari.ai...@linux.intel.com>");
> > +MODULE_AUTHOR("Sylwester Nawrocki <s.nawro...@samsung.com>");
> > +MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovet...@gmx.de>");
> > diff --git a/include/media/v4l2-fwnode.h b/include/media/v4l2-fwnode.h
> > new file mode 100644
> > index 0000000..a675d8a
> > --- /dev/null
> > +++ b/include/media/v4l2-fwnode.h
> > @@ -0,0 +1,104 @@
> > +/*
> > + * V4L2 fwnode binding parsing library
> > + *
> > + * Copyright (c) 2016 Intel Corporation.
> > + * Author: Sakari Ailus <sakari.ai...@linux.intel.com>
> > + *
> > + * Copyright (C) 2012 - 2013 Samsung Electronics Co., Ltd.
> > + * Author: Sylwester Nawrocki <s.nawro...@samsung.com>
> > + *
> > + * Copyright (C) 2012 Renesas Electronics Corp.
> > + * Author: Guennadi Liakhovetski <g.liakhovet...@gmx.de>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of version 2 of the GNU General Public License as
> > + * published by the Free Software Foundation.
> > + */
> > +#ifndef _V4L2_FWNODE_H
> > +#define _V4L2_FWNODE_H
> > +
> > +#include <linux/list.h>
> > +#include <linux/types.h>
> > +#include <linux/errno.h>
> > +#include <linux/of_graph.h>
>
> Alphabetical order please.
Yes.
>
> > +#include <media/v4l2-mediabus.h>
> > +
> > +struct fwnode_handle;
> > +
> > +/**
> > + * struct v4l2_fwnode_bus_mipi_csi2 - MIPI CSI-2 bus data structure
> > + * @flags: media bus (V4L2_MBUS_*) flags
> > + * @data_lanes: an array of physical data lane indexes
> > + * @clock_lane: physical lane index of the clock lane
> > + * @num_data_lanes: number of data lanes
> > + * @lane_polarities: polarity of the lanes. The order is the same of
> > + * the physical lanes.
> > + */
> > +struct v4l2_fwnode_bus_mipi_csi2 {
> > + unsigned int flags;
> > + unsigned char data_lanes[4];
> > + unsigned char clock_lane;
> > + unsigned short num_data_lanes;
> > + bool lane_polarities[5];
> > +};
> > +
> > +/**
> > + * struct v4l2_fwnode_bus_parallel - parallel data bus data structure
> > + * @flags: media bus (V4L2_MBUS_*) flags
> > + * @bus_width: bus width in bits
> > + * @data_shift: data shift in bits
> > + */
> > +struct v4l2_fwnode_bus_parallel {
> > + unsigned int flags;
> > + unsigned char bus_width;
> > + unsigned char data_shift;
> > +};
> > +
> > +/**
> > + * struct v4l2_fwnode_endpoint - the endpoint data structure
> > + * @base: fwnode endpoint of the v4l2_fwnode
> > + * @bus_type: bus type
> > + * @bus: bus configuration data structure
> > + * @link_frequencies: array of supported link frequencies
> > + * @nr_of_link_frequencies: number of elements in link_frequenccies array
> > + */
> > +struct v4l2_fwnode_endpoint {
> > + struct fwnode_endpoint base;
> > + /*
> > + * Fields below this line will be zeroed by
> > + * v4l2_fwnode_parse_endpoint()
> > + */
> > + enum v4l2_mbus_type bus_type;
> > + union {
> > + struct v4l2_fwnode_bus_parallel parallel;
> > + struct v4l2_fwnode_bus_mipi_csi2 mipi_csi2;
> > + } bus;
> > + u64 *link_frequencies;
> > + unsigned int nr_of_link_frequencies;
> > +};
> > +
> > +/**
> > + * struct v4l2_fwnode_link - a link between two endpoints
> > + * @local_node: pointer to device_node of this endpoint
> > + * @local_port: identifier of the port this endpoint belongs to
> > + * @remote_node: pointer to device_node of the remote endpoint
> > + * @remote_port: identifier of the port the remote endpoint belongs to
> > + */
> > +struct v4l2_fwnode_link {
> > + struct fwnode_handle *local_node;
> > + unsigned int local_port;
> > + struct fwnode_handle *remote_node;
> > + unsigned int remote_port;
> > +};
> > +
> > +int v4l2_fwnode_endpoint_parse(struct fwnode_handle *fwn,
> > + struct v4l2_fwnode_endpoint *vfwn);
> > +struct v4l2_fwnode_endpoint *v4l2_fwnode_endpoint_alloc_parse(
> > + struct fwnode_handle *fwn);
> > +void v4l2_fwnode_endpoint_free(struct v4l2_fwnode_endpoint *vfwn);
> > +int v4l2_fwnode_parse_link(struct fwnode_handle *fwn,
> > + struct v4l2_fwnode_link *link);
> > +void v4l2_fwnode_put_link(struct v4l2_fwnode_link *link);
> > +
> > +#endif /* _V4L2_FWNODE_H */
>
--
Regards,
Sakari Ailus
e-mail: sakari.ai...@iki.fi XMPP: sai...@retiisi.org.uk
