On Thu, 2017-02-02 at 08:58 +0100, Andrzej Hajda wrote:
> On 18.01.2017 11:02, Smitha T Murthy wrote:
> > Add support for codec definition and corresponding buffer
> > requirements for HEVC decoder.
> >
> > Signed-off-by: Smitha T Murthy <smith...@samsung.com>
> > ---
> > drivers/media/platform/s5p-mfc/regs-mfc-v10.h | 3 +++
> > drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c | 3 +++
> > drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 1 +
> > drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 8 ++++++++
> > drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 18 ++++++++++++++++--
> > drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.h | 5 +++++
> > 6 files changed, 36 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/media/platform/s5p-mfc/regs-mfc-v10.h
> > b/drivers/media/platform/s5p-mfc/regs-mfc-v10.h
> > index 153ee68..a57009a 100644
> > --- a/drivers/media/platform/s5p-mfc/regs-mfc-v10.h
> > +++ b/drivers/media/platform/s5p-mfc/regs-mfc-v10.h
> > @@ -32,6 +32,9 @@
> > #define MFC_VERSION_V10 0xA0
> > #define MFC_NUM_PORTS_V10 1
> >
> > +/* MFCv10 codec defines*/
> > +#define S5P_FIMV_CODEC_HEVC_DEC 17
> > +
> > /* Encoder buffer size for MFC v10.0 */
> > #define ENC_V100_H264_ME_SIZE(x, y) \
> > (((x + 3) * (y + 3) * 8) \
> > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c
> > b/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c
> > index b1b1491..76eca67 100644
> > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c
> > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c
> > @@ -101,6 +101,9 @@ static int s5p_mfc_open_inst_cmd_v6(struct s5p_mfc_ctx
> > *ctx)
> > case S5P_MFC_CODEC_VP8_DEC:
> > codec_type = S5P_FIMV_CODEC_VP8_DEC_V6;
> > break;
> > + case S5P_MFC_CODEC_HEVC_DEC:
> > + codec_type = S5P_FIMV_CODEC_HEVC_DEC;
> > + break;
> > case S5P_MFC_CODEC_H264_ENC:
> > codec_type = S5P_FIMV_CODEC_H264_ENC_V6;
> > break;
> > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> > b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> > index 998e24b..5c46060 100644
> > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> > @@ -79,6 +79,7 @@ static inline dma_addr_t s5p_mfc_mem_cookie(void *a, void
> > *b)
> > #define S5P_MFC_CODEC_H263_DEC 5
> > #define S5P_MFC_CODEC_VC1RCV_DEC 6
> > #define S5P_MFC_CODEC_VP8_DEC 7
> > +#define S5P_MFC_CODEC_HEVC_DEC 17
> >
> > #define S5P_MFC_CODEC_H264_ENC 20
> > #define S5P_MFC_CODEC_H264_MVC_ENC 21
> > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> > b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> > index 784b28e..9f459b3 100644
> > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> > @@ -156,6 +156,14 @@
> > .versions = MFC_V6_BIT | MFC_V7_BIT | MFC_V8_BIT |
> > MFC_V10_BIT,
> > },
> > + {
> > + .name = "HEVC Encoded Stream",
> > + .fourcc = V4L2_PIX_FMT_HEVC,
> > + .codec_mode = S5P_FIMV_CODEC_HEVC_DEC,
> > + .type = MFC_FMT_DEC,
> > + .num_planes = 1,
> > + .versions = MFC_V10_BIT,
> > + },
> > };
> >
> > #define NUM_FORMATS ARRAY_SIZE(formats)
> > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> > b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> > index 369210a..b6cb280 100644
> > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> > @@ -220,6 +220,13 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct
> > s5p_mfc_ctx *ctx)
> > S5P_FIMV_SCRATCH_BUFFER_ALIGN_V6);
> > ctx->bank1.size = ctx->scratch_buf_size;
> > break;
> > + case S5P_MFC_CODEC_HEVC_DEC:
> > + mfc_debug(2, "Use min scratch buffer size\n");
> > + ctx->scratch_buf_size = ALIGN(ctx->scratch_buf_size, 256);
>
> Again alignment of something which should be already aligned, and magic
> number instead of S5P_FIMV_SCRATCH_BUFFER_ALIGN_V6.
>
Yes if we are using the scratch buffer given by the firmware we need not
align. I will change it in the next version.
> > + ctx->bank1.size =
> > + ctx->scratch_buf_size +
> > + (ctx->mv_count * ctx->mv_size);
> > + break;
> > case S5P_MFC_CODEC_H264_ENC:
> > if (IS_MFCV10(dev)) {
> > mfc_debug(2, "Use min scratch buffer size\n");
> > @@ -322,6 +329,7 @@ static int s5p_mfc_alloc_instance_buffer_v6(struct
> > s5p_mfc_ctx *ctx)
> > switch (ctx->codec_mode) {
> > case S5P_MFC_CODEC_H264_DEC:
> > case S5P_MFC_CODEC_H264_MVC_DEC:
> > + case S5P_MFC_CODEC_HEVC_DEC:
> > ctx->ctx.size = buf_size->h264_dec_ctx;
> > break;
> > case S5P_MFC_CODEC_MPEG4_DEC:
> > @@ -438,6 +446,10 @@ static void s5p_mfc_dec_calc_dpb_size_v6(struct
> > s5p_mfc_ctx *ctx)
> > ctx->img_height);
> > ctx->mv_size = ALIGN(ctx->mv_size, 16);
> > }
> > + } else if (ctx->codec_mode == S5P_MFC_CODEC_HEVC_DEC) {
> > + ctx->mv_size = s5p_mfc_dec_hevc_mv_size(ctx->img_width,
> > + ctx->img_height);
> > + ctx->mv_size = ALIGN(ctx->mv_size, 32);
>
> Again, unnecessary alignment, result of s5p_mfc_dec_hevc_mv_size is
> already aligned to 256.
#define s5p_mfc_dec_hevc_mv_size(x, y) (dec_lcu_width(x) *
dec_lcu_height(y) * 256 + 512) is for calculation of the size of mv
buffer as given in the user manual. User Manual also mentions it needs
multiple of 32 alignment so added ctx->mv_size = ALIGN(ctx->mv_size,
32). Since it was already done for H264 codec in the same way,
ctx->mv_size = ALIGN(ctx->mv_size, 16) after size calculation through
#define S5P_MFC_DEC_MV_SIZE_V6(x, y) (MB_WIDTH(x) * \
(((MB_HEIGHT(y)+1)/2)*2) * 64 + 128) I followed the same for HEVC mv
buffers too.
>
> > } else {
> > ctx->mv_size = 0;
> > }
> > @@ -526,7 +538,8 @@ static int s5p_mfc_set_dec_frame_buffer_v6(struct
> > s5p_mfc_ctx *ctx)
> > buf_size1 -= ctx->scratch_buf_size;
> >
> > if (ctx->codec_mode == S5P_FIMV_CODEC_H264_DEC ||
> > - ctx->codec_mode == S5P_FIMV_CODEC_H264_MVC_DEC){
> > + ctx->codec_mode == S5P_FIMV_CODEC_H264_MVC_DEC ||
> > + ctx->codec_mode == S5P_FIMV_CODEC_HEVC_DEC) {
> > writel(ctx->mv_size, mfc_regs->d_mv_buffer_size);
> > writel(ctx->mv_count, mfc_regs->d_num_mv);
> > }
> > @@ -549,7 +562,8 @@ static int s5p_mfc_set_dec_frame_buffer_v6(struct
> > s5p_mfc_ctx *ctx)
> > mfc_regs->d_second_plane_dpb + i * 4);
> > }
> > if (ctx->codec_mode == S5P_MFC_CODEC_H264_DEC ||
> > - ctx->codec_mode == S5P_MFC_CODEC_H264_MVC_DEC) {
> > + ctx->codec_mode == S5P_MFC_CODEC_H264_MVC_DEC ||
> > + ctx->codec_mode == S5P_MFC_CODEC_HEVC_DEC) {
> > for (i = 0; i < ctx->mv_count; i++) {
> > /* To test alignment */
> > align_gap = buf_addr1;
> > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.h
> > b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.h
> > index 2b5a9f4..2e404d8 100644
> > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.h
> > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.h
> > @@ -29,6 +29,11 @@
> > #define enc_lcu_width(x_size) ((x_size + 31) / 32)
> > #define enc_lcu_height(y_size) ((y_size + 31) / 32)
> >
> > +#define dec_lcu_width(x_size) ((x_size + 63) / 64)
>
> It could be replaced with:
>
> +#define dec_lcu_width(x_size) ALIGN(x_size, 64)
>
>
> > +#define dec_lcu_height(y_size) ((y_size + 63) / 64)
>
> The same here.
> > +#define s5p_mfc_dec_hevc_mv_size(x, y) \
> > + (dec_lcu_width(x) * dec_lcu_height(y) * 256 + 512)
> > +
>
> If dec_lcu_(width|height) are not used anywhere else, you can just
> squash them here:
>
Yes dec_lcu_(width|height) is not used anywhere else, will squash it.
> #define s5p_mfc_dec_hevc_mv_size(x, y) (ALIGN(x, 64) * ALIGN(y, 64) * 256 +
> 512)
>
> And if there is only one use of this macro, maybe it would be good to
> just hardcode it there.
>
> Regards
> Andrzej
>
I defined the macro s5p_mfc_dec_hevc_mv_size(x, y) in this file because
the same was done for another macro S5P_MFC_DEC_MV_SIZE_V6(x, y) which
is also used only once.
Thank you for the review.
Regards,
Smitha
>
> > /* Definition */
> > #define ENC_MULTI_SLICE_MB_MAX ((1 << 30) - 1)
> > #define ENC_MULTI_SLICE_BIT_MIN 2800
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
