Em Fri, 09 Dec 2016 02:21:20 +0200
CrazyCat <crazyca...@narod.ru> escreveu:
> Updated Geniatech DVB-T/T2 stick support.
>
> Signed-off-by: CrazyCat <crazyca...@narod.ru>
> ---
> drivers/media/usb/dvb-usb/cxusb.c | 136
> ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 136 insertions(+)
>
> diff --git a/drivers/media/usb/dvb-usb/cxusb.c
> b/drivers/media/usb/dvb-usb/cxusb.c
> index 3edc30d..4bf4c68 100644
> --- a/drivers/media/usb/dvb-usb/cxusb.c
> +++ b/drivers/media/usb/dvb-usb/cxusb.c
> @@ -1439,6 +1439,82 @@ static int cxusb_mygica_t230_frontend_attach(struct
> dvb_usb_adapter *adap)
> return 0;
> }
>
> +static int cxusb_mygica_t230c_frontend_attach(struct dvb_usb_adapter *adap)
> +{
> + struct dvb_usb_device *d = adap->dev;
> + struct cxusb_state *st = d->priv;
> + struct i2c_adapter *adapter;
> + struct i2c_client *client_demod;
> + struct i2c_client *client_tuner;
> + struct i2c_board_info info;
> + struct si2168_config si2168_config;
> + struct si2157_config si2157_config;
> +
> + /* Select required USB configuration */
> + if (usb_set_interface(d->udev, 0, 0) < 0)
> + err("set interface failed");
> +
> + /* Unblock all USB pipes */
> + usb_clear_halt(d->udev,
> + usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
> + usb_clear_halt(d->udev,
> + usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
> + usb_clear_halt(d->udev,
> + usb_rcvbulkpipe(d->udev,
> d->props.adapter[0].fe[0].stream.endpoint));
> +
> + /* attach frontend */
> + memset(&si2168_config, 0, sizeof(si2168_config));
> + si2168_config.i2c_adapter = &adapter;
> + si2168_config.fe = &adap->fe_adap[0].fe;
> + si2168_config.ts_mode = SI2168_TS_PARALLEL;
> + si2168_config.ts_clock_inv = 1;
> + memset(&info, 0, sizeof(struct i2c_board_info));
> + strlcpy(info.type, "si2168", I2C_NAME_SIZE);
> + info.addr = 0x64;
> + info.platform_data = &si2168_config;
> + request_module(info.type);
> + client_demod = i2c_new_device(&d->i2c_adap, &info);
> + if (client_demod == NULL || client_demod->dev.driver == NULL)
> + return -ENODEV;
> +
> + if (!try_module_get(client_demod->dev.driver->owner)) {
> + i2c_unregister_device(client_demod);
> + return -ENODEV;
> + }
> +
> + /* attach tuner */
> + memset(&si2157_config, 0, sizeof(si2157_config));
> + si2157_config.fe = adap->fe_adap[0].fe;
> + memset(&info, 0, sizeof(struct i2c_board_info));
> + strlcpy(info.type, "si2141", I2C_NAME_SIZE);
> + info.addr = 0x60;
> + info.platform_data = &si2157_config;
> + request_module("si2157");
> + client_tuner = i2c_new_device(adapter, &info);
> + if (client_tuner == NULL || client_tuner->dev.driver == NULL) {
> + module_put(client_demod->dev.driver->owner);
> + i2c_unregister_device(client_demod);
> + return -ENODEV;
> + }
> + if (!try_module_get(client_tuner->dev.driver->owner)) {
> + i2c_unregister_device(client_tuner);
> + module_put(client_demod->dev.driver->owner);
> + i2c_unregister_device(client_demod);
> + return -ENODEV;
> + }
> +
> + st->i2c_client_demod = client_demod;
> + st->i2c_client_tuner = client_tuner;
> +
> + /* hook fe: need to resync the slave fifo when signal locks. */
> + mutex_init(&st->stream_mutex);
> + st->last_lock = 0;
> + st->fe_read_status = adap->fe_adap[0].fe->ops.read_status;
> + adap->fe_adap[0].fe->ops.read_status = cxusb_read_status;
> +
> + return 0;
> +}
> +
> /*
> * DViCO has shipped two devices with the same USB ID, but only one of them
> * needs a firmware download. Check the device class details to see if they
> @@ -1521,6 +1597,7 @@ static int
> bluebird_patch_dvico_firmware_download(struct usb_device *udev,
> static struct dvb_usb_device_properties cxusb_d680_dmb_properties;
> static struct dvb_usb_device_properties cxusb_mygica_d689_properties;
> static struct dvb_usb_device_properties cxusb_mygica_t230_properties;
> +static struct dvb_usb_device_properties cxusb_mygica_t230c_properties;
>
> static int cxusb_probe(struct usb_interface *intf,
> const struct usb_device_id *id)
> @@ -1553,6 +1630,8 @@ static int cxusb_probe(struct usb_interface *intf,
> THIS_MODULE, NULL, adapter_nr) ||
> 0 == dvb_usb_device_init(intf, &cxusb_mygica_t230_properties,
> THIS_MODULE, NULL, adapter_nr) ||
> + 0 == dvb_usb_device_init(intf, &cxusb_mygica_t230c_properties,
> + THIS_MODULE, NULL, adapter_nr) ||
> 0)
> return 0;
>
> @@ -1604,6 +1683,7 @@ enum cxusb_table_index {
> CONEXANT_D680_DMB,
> MYGICA_D689,
> MYGICA_T230,
> + MYGICA_T230C,
> NR__cxusb_table_index
> };
>
> @@ -1671,6 +1751,9 @@ enum cxusb_table_index {
> [MYGICA_T230] = {
> USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230)
> },
> + [MYGICA_T230C] = {
> + USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230+1)
> + },
> {} /* Terminating entry */
> };
> MODULE_DEVICE_TABLE (usb, cxusb_table);
> @@ -2370,6 +2453,59 @@ struct dvb_usb_device_properties
> cxusb_bluebird_dualdig4_rev2_properties = {
> }
> };
>
> +static struct dvb_usb_device_properties cxusb_mygica_t230c_properties = {
> + .caps = DVB_USB_IS_AN_I2C_ADAPTER,
> +
> + .usb_ctrl = CYPRESS_FX2,
> +
> + .size_of_priv = sizeof(struct cxusb_state),
> +
> + .num_adapters = 1,
> + .adapter = {
> + {
> + .num_frontends = 1,
> + .fe = {{
> + .streaming_ctrl = cxusb_streaming_ctrl,
> + .frontend_attach = cxusb_mygica_t230c_frontend_attach,
> +
> + /* parameter for the MPEG2-data transfer */
> + .stream = {
> + .type = USB_BULK,
> + .count = 5,
> + .endpoint = 0x02,
> + .u = {
> + .bulk = {
> + .buffersize = 8192,
> + }
> + }
> + },
> + } },
> + },
> + },
> +
> + .power_ctrl = cxusb_d680_dmb_power_ctrl,
> +
> + .i2c_algo = &cxusb_i2c_algo,
> +
> + .generic_bulk_ctrl_endpoint = 0x01,
> +
> + .rc.legacy = {
> + .rc_interval = 100,
> + .rc_map_table = rc_map_t230_table,
> + .rc_map_size = ARRAY_SIZE(rc_map_t230_table),
> + .rc_query = cxusb_d680_dmb_rc_query,
> + },
This also require rebase.
> +
> + .num_device_descs = 1,
> + .devices = {
> + {
> + "Mygica T230C DVB-T/T2/C",
> + { NULL },
> + { &cxusb_table[MYGICA_T230C], NULL },
> + },
> + }
> +};
> +
> static struct usb_driver cxusb_driver = {
> .name = "dvb_usb_cxusb",
> .probe = cxusb_probe,
Thanks,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
