On 11/21/2016 03:25 PM, Hans Verkuil wrote:
> On 18/11/16 12:25, Hugues Fruchet wrote:
>> This V4L2 driver enables DELTA multi-format video decoder
>> of STMicroelectronics STiH4xx SoC series.
>>
>> Signed-off-by: Hugues Fruchet <[email protected]>
>> ---
>> drivers/media/platform/Kconfig | 20 +
>> drivers/media/platform/Makefile | 2 +
>> drivers/media/platform/sti/delta/Makefile | 2 +
>> drivers/media/platform/sti/delta/delta-cfg.h | 60 +
>> drivers/media/platform/sti/delta/delta-v4l2.c | 1813
>> +++++++++++++++++++++++++
>> drivers/media/platform/sti/delta/delta.h | 514 +++++++
>> 6 files changed, 2411 insertions(+)
>> create mode 100644 drivers/media/platform/sti/delta/Makefile
>> create mode 100644 drivers/media/platform/sti/delta/delta-cfg.h
>> create mode 100644 drivers/media/platform/sti/delta/delta-v4l2.c
>> create mode 100644 drivers/media/platform/sti/delta/delta.h
>>
>
> <snip>
>
>> +static int delta_s_selection(struct file *file, void *fh,
>> + struct v4l2_selection *s)
>> +{
>> + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
>> + return -EINVAL;
>> +
>> + /* reject attempts to write read only targets */
>> + if ((s->target == V4L2_SEL_TGT_COMPOSE_DEFAULT) ||
>> + (s->target == V4L2_SEL_TGT_COMPOSE_BOUNDS) ||
>> + (s->target == V4L2_SEL_TGT_COMPOSE_PADDED))
>> + return -EINVAL;
>> +
>> + /* decoder don't support crop/compose request from user,
>> + * just return silently what we can currently do
>> + */
>> + return delta_g_selection(file, fh, s);
>> +}
>
> Huh? If you don't support s_selection, then just drop it.
yes, seems natural but explicit checks are there in compliance which
fails if I remove s_selection:
test Cropping: OK (Not Supported)
fail:
sources/v4l-utils/utils/v4l2-compliance/v4l2-test-formats.cpp(1457):
doioctl(node, VIDIOC_S_SELECTION, &sel_compose) != EINVAL
fail:
sources/v4l-utils/utils/v4l2-compliance/v4l2-test-formats.cpp(1501):
testBasicCompose(node, V4L2_BUF_TYPE_VIDEO_CAPTURE)
test Composing: FAIL
>
> <snip>
>
>> +static int delta_vb2_au_start_streaming(struct vb2_queue *q,
>> + unsigned int count)
>> +{
>> + struct delta_ctx *ctx = vb2_get_drv_priv(q);
>> + struct delta_dev *delta = ctx->dev;
>> + const struct delta_dec *dec = ctx->dec;
>> + struct delta_au *au;
>> + int ret = 0;
>> + struct vb2_v4l2_buffer *vbuf = NULL;
>> + struct delta_streaminfo *streaminfo = &ctx->streaminfo;
>> + struct delta_frameinfo *frameinfo = &ctx->frameinfo;
>> +
>> + if ((ctx->state != DELTA_STATE_WF_FORMAT) &&
>> + (ctx->state != DELTA_STATE_WF_STREAMINFO))
>> + return 0;
>> +
>> + if (ctx->state == DELTA_STATE_WF_FORMAT) {
>> + /* open decoder if not yet done */
>> + ret = delta_open_decoder(ctx,
>> + ctx->streaminfo.streamformat,
>> + ctx->frameinfo.pixelformat, &dec);
>> + if (ret)
>> + return ret;
>
> This should be 'goto err;'. I mentioned this in the original review as
> well, but
> apparently you forgot to fix it.
Very sorry for this, seems like I encountered last minute merge trouble
as for q->dev...
>
>> + ctx->dec = dec;
>> + ctx->state = DELTA_STATE_WF_STREAMINFO;
>> + }
>> +
>> + /* first buffer should contain stream header,
>> + * decode it to get the infos related to stream
>> + * such as width, height, dpb, ...
>> + */
>> + vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
>> + if (!vbuf) {
>> + dev_err(delta->dev, "%s failed to start streaming, no stream
>> header buffer enqueued\n",
>> + ctx->name);
>> + ret = -EINVAL;
>> + goto err;
>> + }
>> + au = to_au(vbuf);
>> + au->size = vb2_get_plane_payload(&vbuf->vb2_buf, 0);
>> + au->dts = vbuf->vb2_buf.timestamp;
>> +
>> + delta_push_dts(ctx, au->dts);
>> +
>> + /* dump access unit */
>> + dump_au(ctx, au);
>> +
>> + /* decode this access unit */
>> + ret = call_dec_op(dec, decode, ctx, au);
>> + if (ret) {
>> + dev_err(delta->dev, "%s failed to start streaming, header
>> decoding failed (%d)\n",
>> + ctx->name, ret);
>> + goto err;
>> + }
>> +
>> + ret = call_dec_op(dec, get_streaminfo, ctx, streaminfo);
>> + if (ret) {
>> + dev_dbg_ratelimited(delta->dev,
>> + "%s failed to start streaming, valid stream
>> header not yet decoded\n",
>> + ctx->name);
>> + goto err;
>> + }
>> + ctx->flags |= DELTA_FLAG_STREAMINFO;
>> +
>> + ret = call_dec_op(dec, get_frameinfo, ctx, frameinfo);
>> + if (ret)
>> + goto err;
>> + ctx->flags |= DELTA_FLAG_FRAMEINFO;
>> +
>> + ctx->state = DELTA_STATE_READY;
>> +
>> + delta_au_done(ctx, au, ret);
>> + return 0;
>> +
>> +err:
>> + /* return all buffers to vb2 in QUEUED state.
>> + * This will give ownership back to userspace
>> + */
>> + if (vbuf)
>> + v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_QUEUED);
>> +
>> + while ((vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx)))
>> + v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_QUEUED);
>> + return ret;
>> +}
>
> <snip>
>
>> +static int queue_init(void *priv,
>> + struct vb2_queue *src_vq, struct vb2_queue *dst_vq)
>> +{
>> + struct vb2_queue *q;
>> + struct delta_ctx *ctx = priv;
>> + struct delta_dev *delta = ctx->dev;
>> + int ret;
>> +
>> + /* setup vb2 queue for stream input */
>> + q = src_vq;
>> + q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
>> + q->io_modes = VB2_MMAP | VB2_DMABUF;
>> + q->drv_priv = ctx;
>> + /* overload vb2 buf with private au struct */
>> + q->buf_struct_size = sizeof(struct delta_au);
>> + q->ops = &delta_vb2_au_ops;
>> + q->mem_ops = &vb2_dma_contig_memops;
>> + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
>> + q->lock = &delta->lock;
>
> q->dev is still not set. It is not clear to me why this apparently works
> for you.
> It should fail when q->dev is NULL.
Yes it is failing, I suspect merge issue.
>
>> + ret = vb2_queue_init(q);
>> + if (ret)
>> + return ret;
>> +
>> + /* setup vb2 queue for frame output */
>> + q = dst_vq;
>> + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>> + q->io_modes = VB2_MMAP | VB2_DMABUF;
>> + q->drv_priv = ctx;
>> + /* overload vb2 buf with private frame struct */
>> + q->buf_struct_size = sizeof(struct delta_frame)
>> + + DELTA_MAX_FRAME_PRIV_SIZE;
>> + q->ops = &delta_vb2_frame_ops;
>> + q->mem_ops = &vb2_dma_contig_memops;
>> + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
>> + q->lock = &delta->lock;
>
> Ditto.
>
>> +
>> + return vb2_queue_init(q);
>> +}
>
> Regards,
>
> Hans
>--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
