Hi Ulrich,
Thank you for the patch.
On Friday 16 Sep 2016 15:09:09 Ulrich Hecht wrote:
> From: Hans Verkuil <hverk...@xs4all.nl>
>
> Add support in the dts for the HDMI input. Based on the Lager dts
> patch from Ulrich Hecht.
>
> Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
> [uli: removed "renesas," prefixes from pfc nodes]
> Signed-off-by: Ulrich Hecht <ulrich.hecht+rene...@gmail.com>
> ---
> arch/arm/boot/dts/r8a7791-koelsch.dts | 41 ++++++++++++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts
> b/arch/arm/boot/dts/r8a7791-koelsch.dts index f8a7d09..45b8b5f 100644
> --- a/arch/arm/boot/dts/r8a7791-koelsch.dts
> +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
> @@ -393,6 +393,11 @@
> function = "usb1";
> };
>
> + vin0_pins: vin0 {
> + groups = "vin0_data24", "vin0_sync", "vin0_clkenb",
"vin0_clk";
> + function = "vin0";
> + };
> +
> vin1_pins: vin1 {
> groups = "vin1_data8", "vin1_clk";
> function = "vin1";
> @@ -596,6 +601,21 @@
> };
> };
>
> + hdmi-in@4c {
> + compatible = "adi,adv7612";
> + reg = <0x4c>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
This should be GP4_2.
> + remote = <&vin0>;
Is this needed ?
> + default-input = <0>;
> +
> + port {
> + adv7612: endpoint {
> + remote-endpoint = <&vin0ep>;
> + };
> + };
The ADV7612 has three ports. Ports 0 and 1 correspond to the HDMI inputs, and
port 2 to the digital output. You can leave port 1 out as it's not used on the
board, but you should specify both ports 0 and 2, and add an HDMI connector DT
node connected to port 0 of the ADV7612.
> + };
> +
> eeprom@50 {
> compatible = "renesas,24c02";
> reg = <0x50>;
> @@ -672,6 +692,27 @@
> cpu0-supply = <&vdd_dvfs>;
> };
>
> +/* HDMI video input */
> +&vin0 {
> + status = "okay";
> + pinctrl-0 = <&vin0_pins>;
> + pinctrl-names = "default";
> +
> + port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + vin0ep: endpoint {
> + remote-endpoint = <&adv7612>;
> + bus-width = <24>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + pclk-sample = <1>;
> + data-active = <1>;
> + };
> + };
> +};
> +
> /* composite video input */
> &vin1 {
> status = "okay";
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
