From: Archit Taneja <arc...@ti.com>

For n input fields, the VPE de-interlacer creates n - 2 progressive frames.

To support this, we use line average mode of de-interlacer for the first 2
input fields to generate 2 progressive frames. We then revert back to the
preferred EDI method, and create n - 2 frames, creating a sum of n frames.

Signed-off-by: Archit Taneja <arc...@ti.com>
Signed-off-by: Nikhil Devshatwar <nikhil...@ti.com>
Signed-off-by: Benoit Parrot <bpar...@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 33 +++++++++++++++++++++++++++++++--
 1 file changed, 31 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c 
b/drivers/media/platform/ti-vpe/vpe.c
index 3921fd8cdf1d..a0b29685fb69 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -141,7 +141,7 @@ struct vpe_dei_regs {
  */
 static const struct vpe_dei_regs dei_regs = {
        .mdt_spacial_freq_thr_reg = 0x020C0804u,
-       .edi_config_reg = 0x0118100Fu,
+       .edi_config_reg = 0x0118100Cu,
        .edi_lut_reg0 = 0x08040200u,
        .edi_lut_reg1 = 0x1010100Cu,
        .edi_lut_reg2 = 0x10101010u,
@@ -798,6 +798,23 @@ static void set_dei_shadow_registers(struct vpe_ctx *ctx)
        ctx->load_mmrs = true;
 }
 
+static void config_edi_input_mode(struct vpe_ctx *ctx, int mode)
+{
+       struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
+       u32 *edi_config_reg = &mmr_adb->dei_regs[3];
+
+       if (mode & 0x2)
+               write_field(edi_config_reg, 1, 1, 2);   /* EDI_ENABLE_3D */
+
+       if (mode & 0x3)
+               write_field(edi_config_reg, 1, 1, 3);   /* EDI_CHROMA_3D  */
+
+       write_field(edi_config_reg, mode, VPE_EDI_INP_MODE_MASK,
+               VPE_EDI_INP_MODE_SHIFT);
+
+       ctx->load_mmrs = true;
+}
+
 /*
  * Set the shadow registers whose values are modified when either the
  * source or destination format is changed.
@@ -1111,6 +1128,15 @@ static void device_run(void *priv)
        ctx->dst_vb = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
        WARN_ON(ctx->dst_vb == NULL);
 
+       if (ctx->deinterlacing) {
+               /*
+                * we have output the first 2 frames through line average, we
+                * now switch to EDI de-interlacer
+                */
+               if (ctx->sequence == 2)
+                       config_edi_input_mode(ctx, 0x3); /* EDI (Y + UV) */
+       }
+
        /* config descriptors */
        if (ctx->dev->loaded_mmrs != ctx->mmr_adb.dma_addr || ctx->load_mmrs) {
                vpdma_map_desc_buf(ctx->dev->vpdma, &ctx->mmr_adb);
@@ -1865,7 +1891,10 @@ static void vpe_buf_queue(struct vb2_buffer *vb)
 
 static int vpe_start_streaming(struct vb2_queue *q, unsigned int count)
 {
-       /* currently we do nothing here */
+       struct vpe_ctx *ctx = vb2_get_drv_priv(q);
+
+       if (ctx->deinterlacing)
+               config_edi_input_mode(ctx, 0x0);
 
        return 0;
 }
-- 
2.9.0

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to