Hi,

On Thursday, September 01, 2016 01:39:16 PM Sylwester Nawrocki wrote:
> Since commit 04f59143b571161d25315dd52d7a2ecc022cb71a
> ("i2c: let I2C masters ignore their children for PM")
> the power.ignore_children flag is set when registering an I2C
> adapter. Since I2C transfers are not managed by the fimc-isp-i2c
> driver its clients use pm_runtime_* calls directly to communicate
> required power state of the bus controller.
> However when the power.ignore_children flag is set that doesn't
> work, so clear that flag back after registering the adapter.
> While at it drop pm_runtime_enable() call on the i2c_adapter
> as it is already done by the I2C subsystem when registering
> I2C adapter.
> 
> Cc: <[email protected]> # 4.7+

You may also use "Fixes:" tag to mark the original commit that
this one corrects.

> Reported-by: Marek Szyprowski <[email protected]>
> Signed-off-by: Sylwester Nawrocki <[email protected]>
> ---
>  drivers/media/platform/exynos4-is/fimc-is-i2c.c | 25 
> ++++++++++++++++++-------
>  1 file changed, 18 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/media/platform/exynos4-is/fimc-is-i2c.c 
> b/drivers/media/platform/exynos4-is/fimc-is-i2c.c
> index 7521aa5..03b4246 100644
> --- a/drivers/media/platform/exynos4-is/fimc-is-i2c.c
> +++ b/drivers/media/platform/exynos4-is/fimc-is-i2c.c
> @@ -55,26 +55,37 @@ static int fimc_is_i2c_probe(struct platform_device *pdev)
>       i2c_adap->algo = &fimc_is_i2c_algorithm;
>       i2c_adap->class = I2C_CLASS_SPD;
>  
> +     platform_set_drvdata(pdev, isp_i2c);
> +     pm_runtime_enable(&pdev->dev);
> +
>       ret = i2c_add_adapter(i2c_adap);
>       if (ret < 0) {
>               dev_err(&pdev->dev, "failed to add I2C bus %s\n",
>                                               node->full_name);
> -             return ret;
> +             goto err_pm_dis;
>       }
>  
> -     platform_set_drvdata(pdev, isp_i2c);
> -
> -     pm_runtime_enable(&pdev->dev);
> -     pm_runtime_enable(&i2c_adap->dev);
> -
> +     /*
> +      * Client drivers of this adapter don't do any I2C transfers as that
> +      * is handled by the ISP firmware.  But we rely on the runtime PM
> +      * state propagation from the clients up to the adapter driver so
> +      * clear the ignore_children flags here.  PM rutnime calls are not

Minor nit:

"rutnime" typo

Otherwise it looks all fine to me.

Reviewed-by: Bartlomiej Zolnierkiewicz <[email protected]>

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to