Hi Hans,
Thanks for the valuable comments!
<cut>
>> +
>> +static int vdec_g_fmt(struct file *file, void *fh, struct v4l2_format *f)
>> +{
>> + struct vidc_inst *inst = to_inst(file);
>> + const struct vidc_format *fmt = NULL;
>> + struct v4l2_pix_format_mplane *pixmp = &f->fmt.pix_mp;
>> +
>> + if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
>> + fmt = inst->fmt_cap;
>> + else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
>> + fmt = inst->fmt_out;
>> +
>> + if (inst->in_reconfig) {
>> + inst->height = inst->reconfig_height;
>> + inst->width = inst->reconfig_width;
>> + inst->in_reconfig = false;
>> + }
>> +
>> + pixmp->pixelformat = fmt->pixfmt;
>> +
>> + if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
>> + pixmp->width = inst->width;
>> + pixmp->height = inst->height;
>> + pixmp->colorspace = inst->colorspace;
>> + pixmp->ycbcr_enc = inst->ycbcr_enc;
>> + pixmp->quantization = inst->quantization;
>> + pixmp->xfer_func = inst->xfer_func;
>> + } else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
>> + pixmp->width = inst->out_width;
>> + pixmp->height = inst->out_height;
>> + }
>> +
>> + vdec_try_fmt_common(inst, f);
>
> Is this call really necessary? The current format should always be a valid
> format,
> so this is dubious.
Agreed, this looks over engineered. The only thing which could be
related to this call could be the reconfiguration above. The
reconfiguration is a event from firmware side that the streaming
resolution (based on stream headers) is different from the initial
resolution set it before stream_on. In this case the decoder refuses to
start and wait for reconfiguration. Also get_fmt can be called after the
stream_on so maybe my idea was to return the changed resolution to
userspace so that it can handle the exception properly.
>
>> +
>> + return 0;
>> +}
>> +
>> +static int vdec_s_fmt(struct file *file, void *fh, struct v4l2_format *f)
>> +{
>> + struct vidc_inst *inst = to_inst(file);
>> + struct v4l2_pix_format_mplane *pixmp = &f->fmt.pix_mp;
>> + struct v4l2_pix_format_mplane orig_pixmp;
>> + const struct vidc_format *fmt;
>> + struct v4l2_format format;
>> + u32 pixfmt_out = 0, pixfmt_cap = 0;
>> +
>> + orig_pixmp = *pixmp;
>> +
>> + fmt = vdec_try_fmt_common(inst, f);
>> + if (!fmt)
>> + return -EINVAL;
>> +
>> + if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
>> + pixfmt_out = pixmp->pixelformat;
>> + pixfmt_cap = inst->fmt_cap->pixfmt;
>> + } else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
>> + pixfmt_cap = pixmp->pixelformat;
>> + pixfmt_out = inst->fmt_out->pixfmt;
>> + }
>> +
>> + memset(&format, 0, sizeof(format));
>> +
>> + format.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
>> + format.fmt.pix_mp.pixelformat = pixfmt_out;
>> + format.fmt.pix_mp.width = orig_pixmp.width;
>> + format.fmt.pix_mp.height = orig_pixmp.height;
>> + vdec_try_fmt_common(inst, &format);
>> + inst->out_width = format.fmt.pix_mp.width;
>> + inst->out_height = format.fmt.pix_mp.height;
>> + inst->colorspace = pixmp->colorspace;
>> + inst->ycbcr_enc = pixmp->ycbcr_enc;
>> + inst->quantization = pixmp->quantization;
>> + inst->xfer_func = pixmp->xfer_func;
>
> These four fields can only be set if f->type == VIDEO_OUTPUT.
OK, corrected.
>
>> +
>> + memset(&format, 0, sizeof(format));
>> +
>> + format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
>> + format.fmt.pix_mp.pixelformat = pixfmt_cap;
>> + format.fmt.pix_mp.width = orig_pixmp.width;
>> + format.fmt.pix_mp.height = orig_pixmp.height;
>> + vdec_try_fmt_common(inst, &format);
>> + inst->width = format.fmt.pix_mp.width;
>> + inst->height = format.fmt.pix_mp.height;
>
> This doesn't look right.
>
> If I understand this code correctly, the capture and output format
> depend on one another. Can you explain a bit more what the dependencies
> are? I have to revisit this later, once I have a better idea of what's
> going on here.
The thing is that the capture resolution have hardware alignment
restrictions. Here the height must be aligned to 32 lines. So I got
original pixmp struct and call try_fmt_common to align height to 32 and
save the resolution in the instance height variable.
>
>> +
>> + if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
>> + inst->fmt_out = fmt;
>> + else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
>> + inst->fmt_cap = fmt;
>> +
>> + return 0;
>> +}
>> +
>> +static int
>> +vdec_g_selection(struct file *file, void *priv, struct v4l2_selection *s)
>> +{
>> + struct vidc_inst *inst = to_inst(file);
>> +
>> + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
>> + return -EINVAL;
>> +
>> + switch (s->target) {
>> + case V4L2_SEL_TGT_CROP_DEFAULT:
>> + case V4L2_SEL_TGT_CROP_BOUNDS:
>> + case V4L2_SEL_TGT_CROP:
>> + case V4L2_SEL_TGT_COMPOSE_DEFAULT:
>> + case V4L2_SEL_TGT_COMPOSE_BOUNDS:
>> + case V4L2_SEL_TGT_COMPOSE:
>
> You can't set both crop and compose with just a single s->r. That makes no
> sense.
>
> What exactly are you trying to do here?
This is related to hardware alignment restriction. I'm expecting
userspace (gstreamer is one of them) would call g_selection (g_crop) to
got the actual resolution without vertical padding.
>
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + s->r.top = 0;
>> + s->r.left = 0;
>> + s->r.width = inst->out_width;
>> + s->r.height = inst->out_height;
>> +
>> + return 0;
>> +}
>> +
>> +static int
>> +vdec_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *b)
>> +{
>> + struct vb2_queue *queue = vidc_to_vb2q(file, b->type);
>> +
>> + if (!queue)
>> + return -EINVAL;
>> +
>> + if (!b->count)
>> + vb2_core_queue_release(queue);
>
> Don't do this. Let vb2_reqbufs handle this for you.
Sorry this is leftover during testing with some custom Gstreamer plugin.
>
>> +
>> + return vb2_reqbufs(queue, b);
>> +}
>> +
>> +static int
>> +vdec_querycap(struct file *file, void *fh, struct v4l2_capability *cap)
>> +{
>> + strlcpy(cap->driver, VIDC_DRV_NAME, sizeof(cap->driver));
>> + strlcpy(cap->card, "video decoder", sizeof(cap->card));
>> + strlcpy(cap->bus_info, "platform:vidc", sizeof(cap->bus_info));
>> +
>> + cap->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING;
>> + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
>
> Drop these two lines. Instead set the device_caps field of struct video_device
> to V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING. The v4l2 core will fill
> in these two cap fields for you based on the vdev->device_caps field.
OK, done.
>
>> +
>> + return 0;
>> +}
>> +
>> +static int vdec_enum_fmt(struct file *file, void *fh, struct v4l2_fmtdesc
>> *f)
>> +{
>> + const struct vidc_format *fmt;
>> +
>> + memset(f->reserved, 0, sizeof(f->reserved));
>> +
>> + fmt = find_format_by_index(f->index, f->type);
>> + if (!fmt)
>> + return -EINVAL;
>> +
>> + f->pixelformat = fmt->pixfmt;
>> +
>> + return 0;
>> +}
>> +
>> +static int vdec_querybuf(struct file *file, void *fh, struct v4l2_buffer *b)
>> +{
>> + struct vb2_queue *queue = vidc_to_vb2q(file, b->type);
>> + unsigned int p;
>> + int ret;
>> +
>> + if (!queue)
>> + return -EINVAL;
>> +
>> + ret = vb2_querybuf(queue, b);
>> + if (ret)
>> + return ret;
>> +
>> + if (b->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE &&
>> + b->memory == V4L2_MEMORY_MMAP) {
>> + for (p = 0; p < b->length; p++)
>> + b->m.planes[p].m.mem_offset += DST_QUEUE_OFF_BASE;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int
>> +vdec_create_bufs(struct file *file, void *fh, struct v4l2_create_buffers *b)
>> +{
>> + struct vb2_queue *queue = vidc_to_vb2q(file, b->format.type);
>> +
>> + if (!queue)
>> + return -EINVAL;
>> +
>> + return vb2_create_bufs(queue, b);
>> +}
>> +
>> +static int vdec_prepare_buf(struct file *file, void *fh, struct v4l2_buffer
>> *b)
>> +{
>> + struct vb2_queue *queue = vidc_to_vb2q(file, b->type);
>> +
>> + if (!queue)
>> + return -EINVAL;
>> +
>> + return vb2_prepare_buf(queue, b);
>> +}
>> +
>> +static int vdec_qbuf(struct file *file, void *fh, struct v4l2_buffer *b)
>> +{
>> + struct vb2_queue *queue = vidc_to_vb2q(file, b->type);
>> +
>> + if (!queue)
>> + return -EINVAL;
>> +
>> + return vb2_qbuf(queue, b);
>> +}
>> +
>> +static int
>> +vdec_exportbuf(struct file *file, void *fh, struct v4l2_exportbuffer *b)
>> +{
>> + struct vb2_queue *queue = vidc_to_vb2q(file, b->type);
>> +
>> + if (!queue)
>> + return -EINVAL;
>> +
>> + return vb2_expbuf(queue, b);
>> +}
>> +
>> +static int vdec_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b)
>> +{
>> + struct vb2_queue *queue = vidc_to_vb2q(file, b->type);
>> +
>> + if (!queue)
>> + return -EINVAL;
>> +
>> + return vb2_dqbuf(queue, b, file->f_flags & O_NONBLOCK);
>> +}
>> +
>> +static int vdec_streamon(struct file *file, void *fh, enum v4l2_buf_type
>> type)
>> +{
>> + struct vb2_queue *queue = vidc_to_vb2q(file, type);
>> +
>> + if (!queue)
>> + return -EINVAL;
>> +
>> + return vb2_streamon(queue, type);
>> +}
>> +
>> +static int vdec_streamoff(struct file *file, void *fh, enum v4l2_buf_type
>> type)
>> +{
>> + struct vb2_queue *queue = vidc_to_vb2q(file, type);
>> +
>> + if (!queue)
>> + return -EINVAL;
>> +
>> + return vb2_streamoff(queue, type);
>> +}
>
> Is there a reason why the v4l2-mem2mem framework isn't used? It seems to me
> that
> a lot of this code is in there as well.
So in the begging of driver reworking I have the impression that mem2mem
is the right API to use. Then I decided that this will complicate the
driver a bit without any benefit. Of course I could be wrong.
>
>> +
>> +static int vdec_s_parm(struct file *file, void *fh, struct v4l2_streamparm
>> *a)
>> +{
>> + struct vidc_inst *inst = to_inst(file);
>> + struct v4l2_captureparm *cap = &a->parm.capture;
>> + struct v4l2_fract *timeperframe = &cap->timeperframe;
>> + u64 us_per_frame, fps;
>> +
>> + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE &&
>> + a->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
>> + return -EINVAL;
>> +
>> + memset(cap->reserved, 0, sizeof(cap->reserved));
>> + if (!timeperframe->denominator)
>> + timeperframe->denominator = inst->timeperframe.denominator;
>> + if (!timeperframe->numerator)
>> + timeperframe->numerator = inst->timeperframe.numerator;
>> + cap->readbuffers = 0;
>
> Just set readbuffers to the minimum number of required buffers. Hmm, shouldn't
> v4l2-compliance complain about a 0 value for readbuffers? Odd.
I guess I misunderstood the meaning of those fields and just zeroing
them to make v4l2-compliance happy.
>
> Also, for output use v4l2_outputparm. I know, they are the same, but I don't
> really like it when that fact is (ab)used.
sure, I will.
>
>> + cap->extendedmode = 0;
>> + cap->capability = V4L2_CAP_TIMEPERFRAME;
>> + us_per_frame = timeperframe->numerator * (u64)USEC_PER_SEC;
>> + do_div(us_per_frame, timeperframe->denominator);
>> +
>> + if (!us_per_frame)
>> + return -EINVAL;
>> +
>> + fps = (u64)USEC_PER_SEC;
>> + do_div(fps, us_per_frame);
>> +
>> + inst->fps = fps;
>> + inst->timeperframe = *timeperframe;
>
> Can both capture and output set the timeperframe? Is that intended?
>From the firmware point of view the timeperframe is expected to be set
on the input buffers.
>
>> +
>> + return 0;
>> +}
>> +
>> +static int vdec_g_parm(struct file *file, void *fh, struct v4l2_streamparm
>> *a)
>> +{
>> + struct vidc_inst *inst = to_inst(file);
>> +
>> + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE &&
>> + a->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
>> + return -EINVAL;
>> +
>> + a->parm.capture.capability |= V4L2_CAP_TIMEPERFRAME;
>> + a->parm.capture.timeperframe = inst->timeperframe;
>> +
>> + return 0;
>> +}
>> +
>> +static int vdec_enum_framesizes(struct file *file, void *fh,
>> + struct v4l2_frmsizeenum *fsize)
>> +{
>> + struct hfi_inst *hfi_inst = to_hfi_inst(file);
>> + const struct vidc_format *fmt;
>> +
>> + fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
>> +
>> + fmt = find_format(fsize->pixel_format,
>> + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
>> + if (!fmt) {
>> + fmt = find_format(fsize->pixel_format,
>> + V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
>> + if (!fmt)
>> + return -EINVAL;
>> + }
>> +
>> + if (fsize->index)
>> + return -EINVAL;
>> +
>> + fsize->stepwise.min_width = hfi_inst->width.min;
>> + fsize->stepwise.max_width = hfi_inst->width.max;
>> + fsize->stepwise.step_width = hfi_inst->width.step_size;
>> + fsize->stepwise.min_height = hfi_inst->height.min;
>> + fsize->stepwise.max_height = hfi_inst->height.max;
>> + fsize->stepwise.step_height = hfi_inst->height.step_size;
>> +
>> + return 0;
>> +}
>> +
>> +static int vdec_enum_frameintervals(struct file *file, void *fh,
>> + struct v4l2_frmivalenum *fival)
>> +{
>> + struct hfi_inst *hfi_inst = to_hfi_inst(file);
>> + const struct vidc_format *fmt;
>> +
>> + fival->type = V4L2_FRMIVAL_TYPE_STEPWISE;
>> +
>> + fmt = find_format(fival->pixel_format,
>> + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
>> + if (!fmt)
>> + return -EINVAL;
>> +
>> + if (fival->index)
>> + return -EINVAL;
>> +
>> + if (!fival->width || !fival->height)
>> + return -EINVAL;
>> +
>> + if (fival->width > hfi_inst->width.max ||
>> + fival->width < hfi_inst->width.min ||
>> + fival->height > hfi_inst->height.max ||
>> + fival->height < hfi_inst->height.min)
>> + return -EINVAL;
>> +
>> + fival->stepwise.min.numerator = hfi_inst->framerate.min;
>> + fival->stepwise.min.denominator = 1;
>> + fival->stepwise.max.numerator = hfi_inst->framerate.max;
>> + fival->stepwise.max.denominator = 1;
>> + fival->stepwise.step.numerator = hfi_inst->framerate.step_size;
>> + fival->stepwise.step.denominator = 1;
>> +
>> + return 0;
>> +}
>> +
>> +static int vdec_subscribe_event(struct v4l2_fh *fh,
>> + const struct v4l2_event_subscription *sub)
>> +{
>> + switch (sub->type) {
>> + case V4L2_EVENT_EOS:
>> + return v4l2_event_subscribe(fh, sub, 2, NULL);
>> + case V4L2_EVENT_SOURCE_CHANGE:
>> + return v4l2_src_change_event_subscribe(fh, sub);
>> + case V4L2_EVENT_CTRL:
>> + return v4l2_ctrl_subscribe_event(fh, sub);
>> + default:
>> + return -EINVAL;
>> + }
>> +}
>> +
>> +static const struct v4l2_ioctl_ops vdec_ioctl_ops = {
>> + .vidioc_querycap = vdec_querycap,
>> + .vidioc_enum_fmt_vid_cap_mplane = vdec_enum_fmt,
>> + .vidioc_enum_fmt_vid_out_mplane = vdec_enum_fmt,
>> + .vidioc_s_fmt_vid_cap_mplane = vdec_s_fmt,
>> + .vidioc_s_fmt_vid_out_mplane = vdec_s_fmt,
>> + .vidioc_g_fmt_vid_cap_mplane = vdec_g_fmt,
>> + .vidioc_g_fmt_vid_out_mplane = vdec_g_fmt,
>> + .vidioc_try_fmt_vid_cap_mplane = vdec_try_fmt,
>> + .vidioc_try_fmt_vid_out_mplane = vdec_try_fmt,
>> + .vidioc_g_selection = vdec_g_selection,
>> + .vidioc_reqbufs = vdec_reqbufs,
>> + .vidioc_querybuf = vdec_querybuf,
>> + .vidioc_create_bufs = vdec_create_bufs,
>> + .vidioc_prepare_buf = vdec_prepare_buf,
>> + .vidioc_qbuf = vdec_qbuf,
>> + .vidioc_expbuf = vdec_exportbuf,
>> + .vidioc_dqbuf = vdec_dqbuf,
>> + .vidioc_streamon = vdec_streamon,
>> + .vidioc_streamoff = vdec_streamoff,
>> + .vidioc_s_parm = vdec_s_parm,
>> + .vidioc_g_parm = vdec_g_parm,
>> + .vidioc_enum_framesizes = vdec_enum_framesizes,
>> + .vidioc_enum_frameintervals = vdec_enum_frameintervals,
>> + .vidioc_subscribe_event = vdec_subscribe_event,
>> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
>> +};
>> +
>> +static int vdec_init_session(struct vidc_inst *inst)
>> +{
>> + struct hfi_core *hfi = &inst->core->hfi;
>> + u32 pixfmt = inst->fmt_out->pixfmt;
>> + struct hfi_framesize fs;
>> + u32 ptype;
>> + int ret;
>> +
>> + ret = vidc_hfi_session_init(hfi, inst->hfi_inst, pixfmt,
>> + VIDC_SESSION_TYPE_DEC);
>> + if (ret)
>> + return ret;
>> +
>> + ptype = HFI_PROPERTY_PARAM_FRAME_SIZE;
>> + fs.buffer_type = HFI_BUFFER_INPUT;
>> + fs.width = inst->out_width;
>> + fs.height = inst->out_height;
>> +
>> + ret = vidc_hfi_session_set_property(hfi, inst->hfi_inst, ptype, &fs);
>> + if (ret)
>> + goto err;
>> +
>> + fs.buffer_type = HFI_BUFFER_OUTPUT;
>> + fs.width = inst->width;
>> + fs.height = inst->height;
>> +
>> + ret = vidc_hfi_session_set_property(hfi, inst->hfi_inst, ptype, &fs);
>> + if (ret)
>> + goto err;
>> +
>> + pixfmt = inst->fmt_cap->pixfmt;
>> +
>> + ret = vidc_set_color_format(inst, HFI_BUFFER_OUTPUT, pixfmt);
>> + if (ret)
>> + goto err;
>> +
>> + return 0;
>> +err:
>> + vidc_hfi_session_deinit(hfi, inst->hfi_inst);
>> + return ret;
>> +}
>> +
>> +static int vdec_cap_num_buffers(struct vidc_inst *inst,
>> + struct hfi_buffer_requirements *bufreq)
>> +{
>> + struct hfi_core *hfi = &inst->core->hfi;
>> + struct device *dev = inst->core->dev;
>> + int ret, ret2;
>> +
>> + ret = pm_runtime_get_sync(dev);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = vdec_init_session(inst);
>> + if (ret)
>> + goto put_sync;
>> +
>> + ret = vidc_buf_descs(inst, HFI_BUFFER_OUTPUT, bufreq);
>> +
>> + vidc_hfi_session_deinit(hfi, inst->hfi_inst);
>> +
>> +put_sync:
>> + ret2 = pm_runtime_put_sync(dev);
>> +
>> + return ret ? ret : ret2;
>> +}
>> +
>> +static int vdec_queue_setup(struct vb2_queue *q,
>> + unsigned int *num_buffers, unsigned int *num_planes,
>> + unsigned int sizes[], struct device *alloc_devs[])
>> +{
>> + struct vidc_inst *inst = vb2_get_drv_priv(q);
>> + struct hfi_buffer_requirements bufreq;
>> + unsigned int p;
>> + int ret = 0;
>> + u32 mbs;
>> +
>> + switch (q->type) {
>> + case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
>> + *num_planes = inst->fmt_out->num_planes;
>> +
>> + *num_buffers = clamp_val(*num_buffers, 4, VIDEO_MAX_FRAME);
>
> No need to check for VIDEO_MAX_FRAME. I assume 4 is the minimum required
> number of buffers. Just set min_buffers_needed in struct vb2_queue to 4
> instead.
Sure, I missed the clamp in videobu2-core.
>
>> +
>> + mbs = inst->out_width * inst->out_height /
>> + MACROBLOCKS_PER_PIXEL;
>> + for (p = 0; p < *num_planes; p++) {
>> + sizes[p] = get_framesize_compressed(mbs);
>> + alloc_devs[p] = inst->core->dev;
>
> Don't do this here. Just set the dev field of vb2_queue to inst->core->dev.
> alloc_devs[] is prefilled with q->dev by vb2.
Good remark, this change has been made latetly so I have some excuse :)
>
>> + }
>> +
>> + inst->num_input_bufs = *num_buffers;
>> + break;
>> + case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
>> + *num_planes = inst->fmt_cap->num_planes;
>> +
>> + ret = vdec_cap_num_buffers(inst, &bufreq);
>> + if (ret)
>> + break;
>> +
>> + *num_buffers = max(*num_buffers, bufreq.count_actual);
>
> How is bufreq.count_actual derived? I.e. what does it depend on?
Good question, the count_actual is derived from firmware based on input
and output resolutions, framerate and codec i.e. the firmware based on
those parameters decides the number of buffers need for optimal
performance.
>
>> +
>> + for (p = 0; p < *num_planes; p++) {
>> + sizes[p] = get_framesize_nv12(p, inst->height,
>> + inst->width);
>> + alloc_devs[p] = inst->core->dev;
>> + }
>> +
>> + inst->num_output_bufs = *num_buffers;
>> + break;
>> + default:
>> + ret = -EINVAL;
>> + break;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int vdec_check_configuration(struct vidc_inst *inst)
>> +{
>> + struct hfi_buffer_requirements bufreq;
>> + int ret;
>> +
>> + ret = vidc_buf_descs(inst, HFI_BUFFER_OUTPUT, &bufreq);
>> + if (ret)
>> + return ret;
>> +
>> + if (inst->num_output_bufs < bufreq.count_actual ||
>> + inst->num_output_bufs < bufreq.count_min)
>> + return -EINVAL;
>> +
>> + ret = vidc_buf_descs(inst, HFI_BUFFER_INPUT, &bufreq);
>> + if (ret)
>> + return ret;
>> +
>> + if (inst->num_input_bufs < bufreq.count_min)
>> + return -EINVAL;
>> +
>> + return 0;
>> +}
>> +
>> +static int vdec_start_streaming(struct vb2_queue *q, unsigned int count)
>> +{
>> + struct vidc_inst *inst = vb2_get_drv_priv(q);
>> + struct hfi_core *hfi = &inst->core->hfi;
>> + struct device *dev = inst->core->dev;
>> + struct hfi_buffer_requirements bufreq;
>> + struct hfi_buffer_count_actual buf_count;
>> + struct vb2_queue *queue;
>> + u32 ptype;
>> + int ret;
>> +
>> + switch (q->type) {
>> + case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
>> + queue = &inst->bufq_cap;
>> + break;
>> + case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
>> + queue = &inst->bufq_out;
>> + break;
>> + default:
>
> If start_streaming fails, then all pending buffers have to be returned by the
> driver
> by calling vb2_buffer_done(VB2_BUF_STATE_QUEUED). This will give ownership
> back to
> userspace.
Infact this error path shouldn't be possible, because videobu2-core
should check q->type before jumping here?
>
>> + return -EINVAL;
>> + }
>> +
>> + if (!vb2_is_streaming(queue))
>> + return 0;
>
> Can never happen, no need to test for this.
This can happen cause start_streaming is called for OUTPUT and for
CAPTURE queues, see the above switch (q->type). If start_streaming is
called for the CAPTURE thus vb2_is_streaming() checks does
start_streaming is already called for OUTPUT. So this guarantee that the
firmware will be started when the streaming is started for both queues.
>
>> +
>> + inst->in_reconfig = false;
>> + inst->sequence = 0;
>> +
>> + ret = pm_runtime_get_sync(dev);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = vdec_init_session(inst);
>> + if (ret)
>> + goto put_sync;
>> +
>> + ret = vdec_set_properties(inst);
>> + if (ret)
>> + goto deinit_sess;
>> +
>> + ret = vdec_check_configuration(inst);
>> + if (ret)
>> + goto deinit_sess;
>> +
>> + ptype = HFI_PROPERTY_PARAM_BUFFER_COUNT_ACTUAL;
>> + buf_count.type = HFI_BUFFER_INPUT;
>> + buf_count.count_actual = inst->num_input_bufs;
>> +
>> + ret = vidc_hfi_session_set_property(hfi, inst->hfi_inst,
>> + ptype, &buf_count);
>> + if (ret)
>> + goto deinit_sess;
>> +
>> + ret = vidc_buf_descs(inst, HFI_BUFFER_OUTPUT, &bufreq);
>> + if (ret)
>> + goto deinit_sess;
>> +
>> + ptype = HFI_PROPERTY_PARAM_BUFFER_COUNT_ACTUAL;
>> + buf_count.type = HFI_BUFFER_OUTPUT;
>> + buf_count.count_actual = inst->num_output_bufs;
>> +
>> + ret = vidc_hfi_session_set_property(hfi, inst->hfi_inst,
>> + ptype, &buf_count);
>> + if (ret)
>> + goto deinit_sess;
>> +
>> + if (inst->num_output_bufs != bufreq.count_actual) {
>> + struct hfi_buffer_display_hold_count_actual display;
>> +
>> + ptype = HFI_PROPERTY_PARAM_BUFFER_DISPLAY_HOLD_COUNT_ACTUAL;
>> + display.type = HFI_BUFFER_OUTPUT;
>> + display.hold_count = inst->num_output_bufs -
>> + bufreq.count_actual;
>> +
>> + ret = vidc_hfi_session_set_property(hfi, inst->hfi_inst,
>> + ptype, &display);
>> + if (ret)
>> + goto deinit_sess;
>> + }
>> +
>> + ret = vidc_vb2_start_streaming(inst);
>> + if (ret)
>> + goto deinit_sess;
>> +
>> + return 0;
>> +
>> +deinit_sess:
>> + vidc_hfi_session_deinit(hfi, inst->hfi_inst);
>
> Note that vidc_vb2_start_streaming already calls vidc_hfi_session_deinit on
> error.
Probably you wanted to say vdec_init_session has deinit on error path?
If so I cannot see the problem, vidc_hfi_session_deinit is called only once?
> No idea if vidc_hfi_session_deinit can handle that, I just thought I'd
> mention it.
>
>> +put_sync:
>> + pm_runtime_put_sync(dev);
>> + return ret;
>> +}
>> +
>> +static const struct vb2_ops vdec_vb2_ops = {
>> + .queue_setup = vdec_queue_setup,
>> + .buf_init = vidc_vb2_buf_init,
>> + .buf_prepare = vidc_vb2_buf_prepare,
>> + .start_streaming = vdec_start_streaming,
>> + .stop_streaming = vidc_vb2_stop_streaming,
>
>
> Note that stop_streaming has to return all pending buffers by calling
> vb2_buffer_done(VB2_BUF_STATE_ERROR).
> This will give ownership back to userspace.
>
> And I don't think vidc_vb2_stop_streaming does that right now.
Me too, I will re-consider it.
>
>> + .buf_queue = vidc_vb2_buf_queue,
>> +};
>> +
>> +static int vdec_empty_buf_done(struct hfi_inst *hfi_inst, u32 addr,
>> + u32 bytesused, u32 data_offset, u32 flags)
>> +{
>> + struct vidc_inst *inst = hfi_inst->ops_priv;
>> + struct vb2_v4l2_buffer *vbuf;
>> + struct vb2_buffer *vb;
>> +
>> + vbuf = vidc_vb2_find_buf(inst, addr);
>> + if (!vbuf)
>> + return -EINVAL;
>> +
>> + vb = &vbuf->vb2_buf;
>> + vbuf->flags = flags;
>> +
>> + vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
>> +
>> + return 0;
>> +}
>> +
>> +static int vdec_fill_buf_done(struct hfi_inst *hfi_inst, u32 addr,
>> + u32 bytesused, u32 data_offset, u32 flags,
>> + struct timeval *timestamp)
>> +{
>> + struct vidc_inst *inst = hfi_inst->ops_priv;
>> + struct vb2_v4l2_buffer *vbuf;
>> + struct vb2_buffer *vb;
>> +
>> + vbuf = vidc_vb2_find_buf(inst, addr);
>> + if (!vbuf)
>> + return -EINVAL;
>> +
>> + vb = &vbuf->vb2_buf;
>> + vb->planes[0].bytesused = bytesused;
>> + vb->planes[0].data_offset = data_offset;
>> + vb->timestamp = timeval_to_ns(timestamp);
>> + vbuf->flags = flags;
>> + vbuf->sequence = inst->sequence++;
>> +
>> + vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
>> +
>> + if (vbuf->flags & V4L2_BUF_FLAG_LAST) {
>> + const struct v4l2_event ev = {
>
> I think this can be static const.
Sure, will do it.
>
>> + .type = V4L2_EVENT_EOS
>> + };
>> +
>> + v4l2_event_queue_fh(&inst->fh, &ev);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int vdec_event_notify(struct hfi_inst *hfi_inst, u32 event,
>> + struct hfi_event_data *data)
>> +{
>> + struct vidc_inst *inst = hfi_inst->ops_priv;
>> + struct device *dev = inst->core->dev;
>> + const struct v4l2_event ev = { .type = V4L2_EVENT_SOURCE_CHANGE };
>
> I think this can be static const.
Sure, will do it.
>
>> +
>> + switch (event) {
>> + case EVT_SESSION_ERROR:
>> + if (hfi_inst) {
>> + mutex_lock(&hfi_inst->lock);
>> + inst->hfi_inst->state = INST_INVALID;
>> + mutex_unlock(&hfi_inst->lock);
>> + }
>> + dev_err(dev, "dec: event session error (inst:%p)\n", hfi_inst);
>> + break;
>> + case EVT_SYS_EVENT_CHANGE:
>> + switch (data->event_type) {
>> + case HFI_EVENT_DATA_SEQUENCE_CHANGED_SUFFICIENT_BUF_RESOURCES:
>> + dev_dbg(dev, "event sufficient resources\n");
>> + break;
>> + case HFI_EVENT_DATA_SEQUENCE_CHANGED_INSUFFICIENT_BUF_RESOURCES:
>> + inst->reconfig_height = data->height;
>> + inst->reconfig_width = data->width;
>> + inst->in_reconfig = true;
>> +
>> + v4l2_event_queue_fh(&inst->fh, &ev);
>> +
>> + dev_dbg(dev, "event not sufficient resources (%ux%u)\n",
>> + data->width, data->height);
>> + break;
>> + default:
>> + break;
>> + }
>> + break;
>> + default:
>> + break;
>> + }
>> +
>> + return 0;
>> +}
>> +
<cut>
>> diff --git a/drivers/media/platform/qcom/vidc/vdec_ctrls.c
>> b/drivers/media/platform/qcom/vidc/vdec_ctrls.c
>> new file mode 100644
>> index 000000000000..59225d8f1fd9
>> --- /dev/null
>> +++ b/drivers/media/platform/qcom/vidc/vdec_ctrls.c
>> @@ -0,0 +1,200 @@
>> +/*
>> + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
>> + * Copyright (C) 2016 Linaro Ltd.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + */
>> +#include <linux/types.h>
>> +#include <media/v4l2-ctrls.h>
>> +
>> +#include "core.h"
>> +
>> +static struct vidc_ctrl vdec_ctrls[] = {
>> + {
>> + .id = V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE,
>> + .type = V4L2_CTRL_TYPE_MENU,
>> + .min = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE,
>> + .max = V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY,
>> + .def = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE,
>> + .flags = V4L2_CTRL_FLAG_VOLATILE,
>> + .menu_skip_mask = ~(
>> + (1 << V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE) |
>> + (1 << V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE)
>> + ),
>> + }, {
>> + .id = V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL,
>> + .type = V4L2_CTRL_TYPE_MENU,
>> + .min = V4L2_MPEG_VIDEO_MPEG4_LEVEL_0,
>> + .max = V4L2_MPEG_VIDEO_MPEG4_LEVEL_5,
>> + .def = V4L2_MPEG_VIDEO_MPEG4_LEVEL_0,
>> + .flags = V4L2_CTRL_FLAG_VOLATILE,
>> + }, {
>> + .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE,
>> + .type = V4L2_CTRL_TYPE_MENU,
>> + .min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE,
>> + .max = V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH,
>> + .def = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE,
>> + .flags = V4L2_CTRL_FLAG_VOLATILE,
>> + .menu_skip_mask = ~(
>> + (1 << V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE) |
>> + (1 << V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE) |
>> + (1 << V4L2_MPEG_VIDEO_H264_PROFILE_MAIN) |
>> + (1 << V4L2_MPEG_VIDEO_H264_PROFILE_HIGH) |
>> + (1 << V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH) |
>> + (1 << V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH)
>> + ),
>> + }, {
>> + .id = V4L2_CID_MPEG_VIDEO_H264_LEVEL,
>> + .type = V4L2_CTRL_TYPE_MENU,
>> + .min = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
>> + .max = V4L2_MPEG_VIDEO_H264_LEVEL_5_1,
>> + .def = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
>> + .flags = V4L2_CTRL_FLAG_VOLATILE,
>> + }, {
>> + .id = V4L2_CID_MPEG_VIDEO_VPX_PROFILE,
>> + .type = V4L2_CTRL_TYPE_INTEGER,
>> + .min = 0,
>> + .max = 3,
>> + .step = 1,
>> + .def = 0,
>> + .flags = V4L2_CTRL_FLAG_VOLATILE,
>> + }, {
>> + .id = V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER,
>> + .type = V4L2_CTRL_TYPE_BOOLEAN,
>> + .def = 0,
>> + },
>> +};
>> +
>> +#define NUM_CTRLS ARRAY_SIZE(vdec_ctrls)
>> +
>> +static int vdec_op_s_ctrl(struct v4l2_ctrl *ctrl)
>> +{
>> + struct vidc_inst *inst = ctrl_to_inst(ctrl);
>> + struct vdec_controls *ctr = &inst->controls.dec;
>> +
>> + switch (ctrl->id) {
>> + case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:
>> + ctr->post_loop_deb_mode = ctrl->val;
>> + break;
>> + case V4L2_CID_MPEG_VIDEO_H264_PROFILE:
>> + case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE:
>> + case V4L2_CID_MPEG_VIDEO_VPX_PROFILE:
>> + ctr->profile = ctrl->val;
>> + break;
>> + case V4L2_CID_MPEG_VIDEO_H264_LEVEL:
>> + case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL:
>> + ctr->level = ctrl->val;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int vdec_op_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
>> +{
>> + struct vidc_inst *inst = ctrl_to_inst(ctrl);
>> + struct vdec_controls *ctr = &inst->controls.dec;
>> + struct hfi_core *hfi = &inst->core->hfi;
>> + union hfi_get_property hprop;
>> + u32 ptype = HFI_PROPERTY_PARAM_PROFILE_LEVEL_CURRENT;
>> + int ret;
>> +
>> + switch (ctrl->id) {
>> + case V4L2_CID_MPEG_VIDEO_H264_PROFILE:
>> + case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE:
>> + case V4L2_CID_MPEG_VIDEO_VPX_PROFILE:
>> + ret = vidc_hfi_session_get_property(hfi, inst->hfi_inst, ptype,
>> + &hprop);
>> + if (!ret)
>> + ctr->profile = hprop.profile_level.profile;
>> + ctrl->val = ctr->profile;
>> + break;
>> + case V4L2_CID_MPEG_VIDEO_H264_LEVEL:
>> + case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL:
>> + ret = vidc_hfi_session_get_property(hfi, inst->hfi_inst, ptype,
>> + &hprop);
>> + if (!ret)
>> + ctr->level = hprop.profile_level.level;
>> + ctrl->val = ctr->level;
>> + break;
>> + case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:
>> + ctrl->val = ctr->post_loop_deb_mode;
>> + break;
>
> Why are these volatile?
Because the firmware acording to stream headers that profile and levels
are different.
>
>> + default:
>> + return -EINVAL;
>> + };
>> +
>> + return 0;
>> +}
>> +
>> +static const struct v4l2_ctrl_ops vdec_ctrl_ops = {
>> + .s_ctrl = vdec_op_s_ctrl,
>> + .g_volatile_ctrl = vdec_op_g_volatile_ctrl,
>> +};
>> +
>> +int vdec_ctrl_init(struct vidc_inst *inst)
>> +{
>> + unsigned int i;
>> + int ret;
>> +
>> + ret = v4l2_ctrl_handler_init(&inst->ctrl_handler, NUM_CTRLS);
>> + if (ret)
>> + return ret;
>> +
>> + for (i = 0; i < NUM_CTRLS; i++) {
>> + struct v4l2_ctrl *ctrl;
>> +
>> + if (vdec_ctrls[i].type == V4L2_CTRL_TYPE_MENU) {
>> + ctrl = v4l2_ctrl_new_std_menu(&inst->ctrl_handler,
>> + &vdec_ctrl_ops,
>> + vdec_ctrls[i].id,
>> + vdec_ctrls[i].max,
>> + vdec_ctrls[i].menu_skip_mask,
>> + vdec_ctrls[i].def);
>> + } else {
>> + ctrl = v4l2_ctrl_new_std(&inst->ctrl_handler,
>> + &vdec_ctrl_ops,
>> + vdec_ctrls[i].id,
>> + vdec_ctrls[i].min,
>> + vdec_ctrls[i].max,
>> + vdec_ctrls[i].step,
>> + vdec_ctrls[i].def);
>> + }
>
> Why have this vdec_ctrls array at all? Just call v4l2_ctrl_new_std(_menu)
> directly for the controls you want to add. Most drivers do that.
Sure I can give it a try, the only thing I am concerned on is the code size.
<cut>
--
regards,
Stan
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
