Mauro Carvalho Chehab wrote:
Hi David,
Em Mon, 14 Sep 2009 19:41:13 -0700
David Liontooth <lionte...@cogweb.net> escreveu:
We're setting up NTSC cable television capture devices in a handfull of
remote locations, using four devices to capture around fifty hours a day
on each location. Capture is scripted and will be ongoing for several
years. We want to minimize the need for human intervention.
I'm looking for advice on which capture device to use. My main
candidates are ivtv (WinTV PVR 500) and USB, but I've not used any of
the supported USB devices.
Are there USB devices that are sufficiently reliable to hold up under
continuous capture for years? Are the drivers robust?
I need zvbi-ntsc-cc support, so a big thanks to Michael Krufty for just
now adding it to em28xx. Do any other USB device chipsets have raw
closed captioning support?
I would also consider using the PCIe device Hauppauge WinTV-HVR-2200,
but I need analog support.
Appreciate any advice.
If you look for stability, the most important item is to choose a good stable
server distribution, like RHEL5. You'll be better serviced than using a desktop
distro with some new (not so stable) kernel and tools.
In terms of stability, the PCI devices are generally more reliable, and, among
all drivers, bttv is the winner, since it is the older driver, so, in thesis,
more bugs were solved on it. That's the reason why several surveillance systems
are still today based on bttv. If you need a newer hardware, then you may choose
saa7134, cx88 or ivtv devices.
I don't recommend using an USB hardware for such hard usage: it will probably
have a shorter life (since it is not as ventilated as a PCI device on a
server cabinet), and you might experience troubles after long plays. In terms
of USB with analog support, em28xx driver is the more stable, and we recently
fixed some bugs on it, related to memory consumption along the time (it used to
forget to free memory, resulting on crashes, after several stream
start/stop's).
There's a tool at v4l2-apps/test made to stress a video driver, made by
Douglas. I suggest that you should run it with the board you'll choose to be
sure that you won't have memory garbage along driver usage.
Cheers,
Mauro
Thank you, Mauro! I much appreciate the advice.
I also see I misattributed the zvbi-ntsc-cc support for em28xx -- kudos
goes to Devin Heitmueller for great work on this.
As for the ventilation issue for USB devices, that may not be a serious
obstacle. If the USB sticks such as Hauppauge HVR-950 have reliable
components, we could strip the plastic casing and mount the unit next to
a fan inside the case.
Memory leaks would be a serious problem on the other hand; thank you for
pointing to the stress test.
I would be happy to use bttv, but I can't find cards. I also need to
grab audio off the PCI bus, which only some bttv cards support.
We've been using saa7135 cards for several years with relatively few
incidents, but they occasionally drop audio.
I've been unable to find any pattern in the audio drops, so I haven't
reported it -- I have no way to reproduce the error, but it happens
regularly, affecting between 3 and 5% of recordings. Audio will
sometimes drop in the middle of a recording and then resume, or else
work fine on the next recording.
Our fallback is ivtv. I was hoping to use USB so that we could get
blades instead of 3U cases; it's also getting hard to find good
motherboards with four PCI slots.
Cheers,
Dave
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
