Hi, Sorry if this is cross posting. I already sent this message to linux-dvb list, but got a bounce from there saying that I should come here instead. So anyway here it goes:
I've been struggling for a while to get the channel scanning to work with my Terratec Cynergy C PCI HD DVB card. I'm using drivers from http://mercurial.intuxication.org/hg/s2-liplianin on Gentoo x86_64 system. Any help is greatly appreciated. The problem might have something to do with dmesg entry: mantis_ack_wait (0): Slave RACK Fail ! By googling I found some patch for other card with same error message but the patch was quite old and didn't apply to the recent driver source. I've tried with Gentoo genkernel (2.6.29-gentoo-r5) and with my own configuration (optimized for athlon64) I've tried dvbscan that comes with gentoo pakage linuxtv-dvb-apps and with http://mercurial.intuxication.org/hg/scan-s2 The s2-liplianin driver for this card has worked with my previous Ubuntu installation few months ago. I tried to gather as much information about the problem as I could: http://www.vanguard.fi/terratec/dvbscan_output.txt http://www.vanguard.fi/terratec/dmesg.txt http://www.vanguard.fi/terratec/lspci.txt http://www.vanguard.fi/terratec/emergeinfo.txt http://www.vanguard.fi/terratec/kernel-config Thank you in advance! - Beepo -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
