Now that we instantiate I2C IR devices explicitly, we can skip probing
altogether on boards where the I2C IR device address is known. The MSI
t...@nywhere Plus is one of these boards.

Signed-off-by: Jean Delvare <kh...@linux-fr.org>
---
 linux/drivers/media/video/saa7134/saa7134-input.c |   27 +++++----------------
 1 file changed, 7 insertions(+), 20 deletions(-)

--- v4l-dvb.orig/linux/drivers/media/video/saa7134/saa7134-input.c      
2009-04-04 10:07:49.000000000 +0200
+++ v4l-dvb/linux/drivers/media/video/saa7134/saa7134-input.c   2009-04-04 
10:22:14.000000000 +0200
@@ -691,16 +691,6 @@ void saa7134_probe_i2c_ir(struct saa7134
                I2C_CLIENT_END
        };
 
-       const unsigned short addr_list_msi[] = {
-               0x30, I2C_CLIENT_END
-       };
-       struct i2c_msg msg_msi = {
-               .addr = 0x50,
-               .flags = I2C_M_RD,
-               .len = 0,
-               .buf = NULL,
-       };
-
        unsigned char subaddr, data;
        struct i2c_msg msg_avermedia[] = { {
                .addr = 0x40,
@@ -747,6 +737,7 @@ void saa7134_probe_i2c_ir(struct saa7134
                init_data.name = "MSI t...@nywhere Plus";
                init_data.get_key = get_key_msi_tvanywhere_plus;
                init_data.ir_codes = ir_codes_msi_tvanywhere_plus;
+               info.addr = 0x30;
                break;
        case SAA7134_BOARD_HAUPPAUGE_HVR1110:
                init_data.name = "HVR 1110";
@@ -766,18 +757,14 @@ void saa7134_probe_i2c_ir(struct saa7134
 
        if (init_data.name)
                info.platform_data = &init_data;
-       client = i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
-       if (client)
+       /* No need to probe if address is known */
+       if (info.addr) {
+               i2c_new_device(&dev->i2c_adap, &info);
                return;
+       }
 
-       /* MSI t...@nywhere Plus controller doesn't seem to
-          respond to probes unless we read something from
-          an existing device. Weird... */
-       rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1);
-       dprintk(KERN_DEBUG "probe 0x%02x @ %s: %s\n",
-               msg_msi.addr, dev->i2c_adap.name,
-               (1 == rc) ? "yes" : "no");
-       client = i2c_new_probed_device(&dev->i2c_adap, &info, addr_list_msi);
+       /* Address not known, fallback to probing */
+       client = i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
        if (client)
                return;
 

-- 
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to