On Thu, Mar 12, 2009 at 09:31:55AM +0100, Guennadi Liakhovetski wrote:
> On Wed, 11 Mar 2009, Sascha Hauer wrote:
>
> > Some Phytec cameras have a I2C GPIO expander which allows it to
> > switch between different sensor bus widths. This was previously
> > handled in the camera driver. Since handling of this switch
> > varies on several boards the cameras are used on, the board
> > support seems a better place to handle the switch
> >
> > Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de>
> > ---
> > arch/arm/mach-pxa/pcm990-baseboard.c | 50
> > +++++++++++++++++++++++++++------
> > 1 files changed, 41 insertions(+), 9 deletions(-)
> >
> > diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c
> > b/arch/arm/mach-pxa/pcm990-baseboard.c
> > index 34841c7..e9feb89 100644
> > --- a/arch/arm/mach-pxa/pcm990-baseboard.c
> > +++ b/arch/arm/mach-pxa/pcm990-baseboard.c
> > @@ -381,14 +381,46 @@ static struct pca953x_platform_data pca9536_data = {
> > .gpio_base = NR_BUILTIN_GPIO + 1,
> > };
> >
> > -static struct soc_camera_link iclink[] = {
> > - {
> > - .bus_id = 0, /* Must match with the camera ID above */
> > - .gpio = NR_BUILTIN_GPIO + 1,
> > - }, {
> > - .bus_id = 0, /* Must match with the camera ID above */
> > - .gpio = -ENXIO,
> > +static int gpio_bus_switch;
> > +
> > +static int pcm990_camera_set_bus_param(struct device *dev,
>
> The prototype will change to use "struct soc_camera_link *"
OK
>
> > + unsigned long flags)
> > +{
> > + if (gpio_bus_switch <= 0)
> > + return 0;
> > +
> > + if (flags & SOCAM_DATAWIDTH_8)
> > + gpio_set_value(NR_BUILTIN_GPIO + 1, 1);
> > + else
> > + gpio_set_value(NR_BUILTIN_GPIO + 1, 0);
>
> You wanted to use gpio_bus_switch for these.
s/wanted to/should/?
OK
>
> > +
> > + return 0;
> > +}
> > +
> > +static unsigned long pcm990_camera_query_bus_param(struct device *dev)
> > +{
> > + int ret;
> > +
> > + if (!gpio_bus_switch) {
> > + ret = gpio_request(NR_BUILTIN_GPIO + 1, "camera");
> > + if (!ret) {
> > + gpio_bus_switch = NR_BUILTIN_GPIO + 1;
> > + gpio_direction_output(gpio_bus_switch, 0);
> > + } else
> > + gpio_bus_switch = -1;
>
> This is a purely internal variable, so, I won't insist if you disagree,
> but, I think, a scheme "non-negative for a valid value or a negative error
> code" looks better, cf.
>
> If you want to initialize a structure with an invalid GPIO number, use
> some negative number (perhaps "-EINVAL"); that will never be valid.
>
> (Documentation/gpio.txt). "-1" looks like you're going to perform
> calculations with it.
OK
>
> > }
> > +
> > + if (gpio_bus_switch > 0)
> > + return SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_10;
> > + else
> > + return SOCAM_DATAWIDTH_10;
> > +}
> > +
> > +static struct soc_camera_link iclink = {
> > + .bus_id = 0, /* Must match with the camera ID above */
> > + .query_bus_param = pcm990_camera_query_bus_param,
> > + .set_bus_param = pcm990_camera_set_bus_param,
> > + .gpio = NR_BUILTIN_GPIO + 1,
>
> There's one patch missing in your patch series:
>
> [PATCH 5/5] Remove the "gpio" member from the struct soc_camera_link
OK. I saw this member is unnecessary now and forgot it a minute later...
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
