Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <pe...@nvidia.com>
---
.../drivers/net/mlxsw/qos_mc_aware.sh | 146 ++++++++----------
1 file changed, 68 insertions(+), 78 deletions(-)
diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh
b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh
index 6d892de43fa8..cd4a5c21360c 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh
@@ -73,122 +73,114 @@ source qos_lib.sh
h1_create()
{
simple_if_init $h1 192.0.2.65/28
+ defer simple_if_fini $h1 192.0.2.65/28
+
mtu_set $h1 10000
-}
-
-h1_destroy()
-{
- mtu_restore $h1
- simple_if_fini $h1 192.0.2.65/28
+ defer mtu_restore $h1
}
h2_create()
{
simple_if_init $h2
+ defer simple_if_fini $h2
+
mtu_set $h2 10000
+ defer mtu_restore $h2
vlan_create $h2 111 v$h2 192.0.2.129/28
+ defer vlan_destroy $h2 111
ip link set dev $h2.111 type vlan egress-qos-map 0:1
}
-h2_destroy()
-{
- vlan_destroy $h2 111
-
- mtu_restore $h2
- simple_if_fini $h2
-}
-
h3_create()
{
simple_if_init $h3 192.0.2.66/28
+ defer simple_if_fini $h3 192.0.2.66/28
+
mtu_set $h3 10000
+ defer mtu_restore $h3
vlan_create $h3 111 v$h3 192.0.2.130/28
-}
-
-h3_destroy()
-{
- vlan_destroy $h3 111
-
- mtu_restore $h3
- simple_if_fini $h3 192.0.2.66/28
+ defer vlan_destroy $h3 111
}
switch_create()
{
ip link set dev $swp1 up
+ defer ip link set dev $swp1 down
+
mtu_set $swp1 10000
+ defer mtu_restore $swp1
ip link set dev $swp2 up
+ defer ip link set dev $swp2 down
+
mtu_set $swp2 10000
+ defer mtu_restore $swp2
ip link set dev $swp3 up
+ defer ip link set dev $swp3 down
+
mtu_set $swp3 10000
+ defer mtu_restore $swp3
vlan_create $swp2 111
+ defer vlan_destroy $swp2 111
+
vlan_create $swp3 111
+ defer vlan_destroy $swp3 111
tc qdisc replace dev $swp3 root handle 3: tbf rate 1gbit \
burst 128K limit 1G
+ defer tc qdisc del dev $swp3 root handle 3:
+
tc qdisc replace dev $swp3 parent 3:3 handle 33: \
prio bands 8 priomap 7 7 7 7 7 7 7 7
+ defer tc qdisc del dev $swp3 parent 3:3 handle 33:
ip link add name br1 type bridge vlan_filtering 0
+ defer ip link del dev br1
ip link set dev br1 addrgenmode none
ip link set dev br1 up
+
ip link set dev $swp1 master br1
+ defer ip link set dev $swp1 nomaster
+
ip link set dev $swp3 master br1
+ defer ip link set dev $swp3 nomaster
ip link add name br111 type bridge vlan_filtering 0
+ defer ip link del dev br111
ip link set dev br111 addrgenmode none
ip link set dev br111 up
+
ip link set dev $swp2.111 master br111
+ defer ip link set dev $swp2.111 nomaster
+
ip link set dev $swp3.111 master br111
+ defer ip link set dev $swp3.111 nomaster
# Make sure that ingress quotas are smaller than egress so that there is
# room for both streams of traffic to be admitted to shared buffer.
devlink_port_pool_th_save $swp1 0
devlink_port_pool_th_set $swp1 0 5
+ defer devlink_port_pool_th_restore $swp1 0
+
devlink_tc_bind_pool_th_save $swp1 0 ingress
devlink_tc_bind_pool_th_set $swp1 0 ingress 0 5
+ defer devlink_tc_bind_pool_th_restore $swp1 0 ingress
devlink_port_pool_th_save $swp2 0
devlink_port_pool_th_set $swp2 0 5
+ defer devlink_port_pool_th_restore $swp2 0
+
devlink_tc_bind_pool_th_save $swp2 1 ingress
devlink_tc_bind_pool_th_set $swp2 1 ingress 0 5
+ defer devlink_tc_bind_pool_th_restore $swp2 1 ingress
devlink_port_pool_th_save $swp3 4
devlink_port_pool_th_set $swp3 4 12
-}
-
-switch_destroy()
-{
- devlink_port_pool_th_restore $swp3 4
-
- devlink_tc_bind_pool_th_restore $swp2 1 ingress
- devlink_port_pool_th_restore $swp2 0
-
- devlink_tc_bind_pool_th_restore $swp1 0 ingress
- devlink_port_pool_th_restore $swp1 0
-
- ip link del dev br111
- ip link del dev br1
-
- tc qdisc del dev $swp3 parent 3:3 handle 33:
- tc qdisc del dev $swp3 root handle 3:
-
- vlan_destroy $swp3 111
- vlan_destroy $swp2 111
-
- mtu_restore $swp3
- ip link set dev $swp3 down
-
- mtu_restore $swp2
- ip link set dev $swp2 down
-
- mtu_restore $swp1
- ip link set dev $swp1 down
+ defer devlink_port_pool_th_restore $swp3 4
}
setup_prepare()
@@ -205,6 +197,7 @@ setup_prepare()
h3mac=$(mac_get $h3)
vrf_prepare
+ defer vrf_cleanup
h1_create
h2_create
@@ -212,45 +205,45 @@ setup_prepare()
switch_create
}
-cleanup()
-{
- pre_cleanup
-
- switch_destroy
- h3_destroy
- h2_destroy
- h1_destroy
-
- vrf_cleanup
-}
-
ping_ipv4()
{
ping_test $h2 192.0.2.130
}
-test_mc_aware()
+__run_uc_measure_rate()
{
- RET=0
-
+ local what=$1; shift
local -a uc_rate
+
start_traffic $h2.111 192.0.2.129 192.0.2.130 $h3mac
- uc_rate=($(measure_rate $swp2 $h3 rx_octets_prio_1 "UC-only"))
- check_err $? "Could not get high enough UC-only ingress rate"
- stop_traffic
+ defer stop_traffic $!
+
+ uc_rate=($(measure_rate $swp2 $h3 rx_octets_prio_1 "$what"))
+ check_err $? "Could not get high enough $what ingress rate"
+
+ echo ${uc_rate[@]}
+}
+
+run_uc_measure_rate()
+{
+ in_defer_scope __run_uc_measure_rate "$@"
+}
+
+test_mc_aware()
+{
+ RET=0
+
+ local -a uc_rate=($(run_uc_measure_rate "UC-only"))
local ucth1=${uc_rate[1]}
start_traffic $h1 192.0.2.65 bc bc
+ defer stop_traffic $!
local d0=$(date +%s)
local t0=$(ethtool_stats_get $h3 rx_octets_prio_0)
local u0=$(ethtool_stats_get $swp1 rx_octets_prio_0)
- local -a uc_rate_2
- start_traffic $h2.111 192.0.2.129 192.0.2.130 $h3mac
- uc_rate_2=($(measure_rate $swp2 $h3 rx_octets_prio_1 "UC+MC"))
- check_err $? "Could not get high enough UC+MC ingress rate"
- stop_traffic
+ local -a uc_rate_2=($(run_uc_measure_rate "UC+MC"))
local ucth2=${uc_rate_2[1]}
local d1=$(date +%s)
@@ -272,8 +265,6 @@ test_mc_aware()
local mc_ir=$(rate $u0 $u1 $interval)
local mc_er=$(rate $t0 $t1 $interval)
- stop_traffic
-
log_test "UC performance under MC overload"
echo "UC-only throughput $(humanize $ucth1)"
@@ -297,6 +288,7 @@ test_uc_aware()
RET=0
start_traffic $h2.111 192.0.2.129 192.0.2.130 $h3mac
+ defer stop_traffic $!
local d0=$(date +%s)
local t0=$(ethtool_stats_get $h3 rx_octets_prio_1)
@@ -326,8 +318,6 @@ test_uc_aware()
((attempts == passes))
check_err $?
- stop_traffic
-
log_test "MC performance under UC overload"
echo " ingress UC throughput $(humanize ${uc_ir})"
echo " egress UC throughput $(humanize ${uc_er})"
--
2.45.0
