The h8300 architecture Makefile sets the CROSS_COMPILE variable to "h8300-unknown-linux-" unconditionally but doing that prevents the variable to be used if a toolchain with a different binary name is installed in the machine.
So only set CROSS_COMPILE to that default if the variable has not been set by the user before. Signed-off-by: Javier Martinez Canillas <jav...@osg.samsung.com> --- Hello, After $SUBJECT, I'm able to build using the toolchain installed by my Linux distribution but the linker gives me an error about an unrecognised emulation mode: h8300-linux-gnu-ld: unrecognised emulation mode: h8300helf_linux I see that h8300helf_linux and 8300self_linux are hardcoded in the Makefile as well and these are not listed as supported emulations: Supported emulations: h8300elf h8300helf h8300self h8300hnelf h8300snelf h8300sxelf h8300sxnelf I tried changing -mh8300helf_linux for -mh8300helf that is listed as a supported emulation but then I got the following error: h8300-linux-gnu-ld: cannot open linker script file ldscripts/h8300helf.xr: No such file or directory Best regards, Javier arch/h8300/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile index 0d2d96e52d9f..e1c02ca230cb 100644 --- a/arch/h8300/Makefile +++ b/arch/h8300/Makefile @@ -22,7 +22,9 @@ KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\" KBUILD_AFLAGS += $(aflags-y) LDFLAGS += $(ldflags-y) +ifeq ($(CROSS_COMPILE),) CROSS_COMPILE := h8300-unknown-linux- +endif core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ ifneq '$(CONFIG_H8300_BUILTIN_DTB)' '""' -- 2.4.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
