In order to match the panel power sequence, disable the enable_gpio
in the probe function. Also, reorder the code in the power_on and
power_off function to match the timing.
Signed-off-by: YH Huang <yh.hu...@mediatek.com>
---
drivers/video/backlight/pwm_bl.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index eff379b..99eca1e 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -54,10 +54,11 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb,
int brightness)
if (err < 0)
dev_err(pb->dev, "failed to enable power supply\n");
+ pwm_enable(pb->pwm);
+
if (pb->enable_gpio)
gpiod_set_value(pb->enable_gpio, 1);
- pwm_enable(pb->pwm);
pb->enabled = true;
}
@@ -66,12 +67,12 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb)
if (!pb->enabled)
return;
- pwm_config(pb->pwm, 0, pb->period);
- pwm_disable(pb->pwm);
-
if (pb->enable_gpio)
gpiod_set_value(pb->enable_gpio, 0);
+ pwm_config(pb->pwm, 0, pb->period);
+ pwm_disable(pb->pwm);
+
regulator_disable(pb->power_supply);
pb->enabled = false;
}
@@ -241,8 +242,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
pb->dev = &pdev->dev;
pb->enabled = false;
- pb->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
- GPIOD_OUT_HIGH);
+ pb->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable");
if (IS_ERR(pb->enable_gpio)) {
ret = PTR_ERR(pb->enable_gpio);
goto err_alloc;
@@ -264,6 +264,9 @@ static int pwm_backlight_probe(struct platform_device *pdev)
pb->enable_gpio = gpio_to_desc(data->enable_gpio);
}
+ if (pb->enable_gpio)
+ gpiod_direction_output(pb->enable_gpio, 0);
+
pb->power_supply = devm_regulator_get(&pdev->dev, "power");
if (IS_ERR(pb->power_supply)) {
ret = PTR_ERR(pb->power_supply);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
