Hi Harvey,
On Tue, Oct 06, 2015 at 05:27:17PM +0100, Harvey Hunt wrote:
> From: Alex Smith <alex.sm...@imgtec.com>
>
> Add device tree nodes for the NEMC and BCH to the JZ4780 device tree,
> and make use of them in the Ci20 device tree to add a node for the
> board's NAND.
>
> Note that since the pinctrl driver is not yet upstream, this includes
> neither pin configuration nor busy/write-protect GPIO pins for the
> NAND. Use of the NAND relies on the boot loader to have left the pins
> configured in a usable state, which should be the case when booted
> from the NAND.
>
> Signed-off-by: Alex Smith <alex.sm...@imgtec.com>
> Cc: Zubair Lutfullah Kakakhel <zubair.kakak...@imgtec.com>
> Cc: David Woodhouse <dw...@infradead.org>
> Cc: Brian Norris <computersforpe...@gmail.com>
> Cc: Paul Burton <paul.bur...@imgtec.com>
> Cc: linux-...@lists.infradead.org
> Cc: devicet...@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-m...@linux-mips.org
> Cc: Alex Smith <a...@alex-smith.me.uk>
> Signed-off-by: Harvey Hunt <harvey.h...@imgtec.com>
> ---
> v6 -> v7:
> - Add nand-ecc-mode to DT.
> - Add nand-on-flash-bbt to DT.
>
> v4 -> v5:
> - New patch adding DT nodes for the NAND so that the driver can be
> tested.
>
> arch/mips/boot/dts/ingenic/ci20.dts | 54
> ++++++++++++++++++++++++++++++++++
> arch/mips/boot/dts/ingenic/jz4780.dtsi | 26 ++++++++++++++++
> 2 files changed, 80 insertions(+)
>
> diff --git a/arch/mips/boot/dts/ingenic/ci20.dts
> b/arch/mips/boot/dts/ingenic/ci20.dts
> index 9fcb9e7..453f1d3 100644
> --- a/arch/mips/boot/dts/ingenic/ci20.dts
> +++ b/arch/mips/boot/dts/ingenic/ci20.dts
> @@ -42,3 +42,57 @@
> &uart4 {
> status = "okay";
> };
> +
> +&nemc {
> + status = "okay";
> +
> + nand: nand@1 {
> + compatible = "ingenic,jz4780-nand";
Isn't the NAND a micron part? This doesn't seem right. Is the device
driver and binding already accepted upstream with that compatible
string?
Cheers
James
> + reg = <1 0 0x1000000>;
> +
> + ingenic,nemc-tAS = <10>;
> + ingenic,nemc-tAH = <5>;
> + ingenic,nemc-tBP = <10>;
> + ingenic,nemc-tAW = <15>;
> + ingenic,nemc-tSTRV = <100>;
> +
> + ingenic,bch-controller = <&bch>;
> + ingenic,ecc-size = <1024>;
> + ingenic,ecc-strength = <24>;
> +
> + nand-ecc-mode = "hw";
> + nand-on-flash-bbt;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + partition@0 {
> + label = "u-boot-spl";
> + reg = <0x0 0x0 0x0 0x800000>;
> + };
> +
> + partition@0x800000 {
> + label = "u-boot";
> + reg = <0x0 0x800000 0x0 0x200000>;
> + };
> +
> + partition@0xa00000 {
> + label = "u-boot-env";
> + reg = <0x0 0xa00000 0x0 0x200000>;
> + };
> +
> + partition@0xc00000 {
> + label = "boot";
> + reg = <0x0 0xc00000 0x0 0x4000000>;
> + };
> +
> + partition@0x8c00000 {
> + label = "system";
> + reg = <0x0 0x4c00000 0x1 0xfb400000>;
> + };
> + };
> +};
> +
> +&bch {
> + status = "okay";
> +};
> diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi
> b/arch/mips/boot/dts/ingenic/jz4780.dtsi
> index 65389f6..b868b42 100644
> --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
> @@ -108,4 +108,30 @@
>
> status = "disabled";
> };
> +
> + nemc: nemc@13410000 {
> + compatible = "ingenic,jz4780-nemc";
> + reg = <0x13410000 0x10000>;
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges = <1 0 0x1b000000 0x1000000
> + 2 0 0x1a000000 0x1000000
> + 3 0 0x19000000 0x1000000
> + 4 0 0x18000000 0x1000000
> + 5 0 0x17000000 0x1000000
> + 6 0 0x16000000 0x1000000>;
> +
> + clocks = <&cgu JZ4780_CLK_NEMC>;
> +
> + status = "disabled";
> + };
> +
> + bch: bch@134d0000 {
> + compatible = "ingenic,jz4780-bch";
> + reg = <0x134d0000 0x10000>;
> +
> + clocks = <&cgu JZ4780_CLK_BCH>;
> +
> + status = "disabled";
> + };
> };
> --
> 2.6.0
>
>
signature.asc
Description: Digital signature
