Shouldn't the device tree binding document go with the other patch series since both the binding document and drivers are merged by Michael or Stephen?
On 10/13/2015 2:22 PM, Jon Mason wrote: > Document the device tree bindings for Broadcom Northstar Plus > architecture based clock controller > > Signed-off-by: Jon Mason <jonma...@broadcom.com> > --- > .../bindings/clock/brcm,iproc-clocks.txt | 30 > ++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > > diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt > b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt > index da8d9bb..b3c3e9d 100644 > --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt > +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt > @@ -130,3 +130,33 @@ These clock IDs are defined in: > ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED > ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED > ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED > + > +Northstar and Northstar Plus > +------ > +PLL and leaf clock compatible strings for Northstar and Northstar Plus are: > + "brcm,nsp-armpll" > + "brcm,nsp-genpll" > + "brcm,nsp-lcpll0" So the current clock driver also supports NS? That will be nice and that indicates all the clock related registers/offsets are exactly the same between NS and NSP? > + > +The following table defines the set of PLL/clock index and ID for Northstar > and > +Northstar Plus. These clock IDs are defined in: > + "include/dt-bindings/clock/bcm-nsp.h" > + > + Clock Source Index ID > + --- ----- ----- --------- > + crystal N/A N/A N/A > + > + armpll crystal N/A N/A > + > + genpll crystal 0 BCM_NSP_GENPLL > + phy genpll 1 BCM_NSP_GENPLL_PHY_CLK > + ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK > + usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK > + iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK > + sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK > + sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK > + > + lcpll0 crystal 0 BCM_NSP_LCPLL0 > + pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK > + sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK > + ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
