On Fri, Oct 02, 2015 at 03:37:56PM -0700, David Daney wrote:
> From: David Daney <david.da...@cavium.com>
> 
> PCI bridges may have their properties be specified via EA entries.
> 
> Extend the EA parser to extract the bridge resources, and modify
> pci_read_bridge_{io,mmio,mmio_pref}() to use resources previously
> obtained via EA.
> 
> Save the offset to the EA capability in struct pci_dev, and use it to
> easily find the EA bridge subordinate and secondary bus numbers.
> 
> When assigning the bridge resources a couple of changes are required
> so that the EA obtained IORESOURCE_PCI_FIXED are not resized, and
> correctly linked into the resource tree.
> 
> 1) In pbus_size_mem() do not attempt to resize the bridge resources if
>    they are marked as IORESOURCE_PCI_FIXED.
> 
> 2) In pci_bus_alloc_from_region()for IORESOURCE_PCI_FIXED resources, just
>    try to request the resource as is, without attempting to resize it.
> 
> Signed-off-by: David Daney <david.da...@cavium.com>
> ---
>  drivers/pci/bus.c       |  7 +++++++
>  drivers/pci/pci.c       | 13 +++++++++++++
>  drivers/pci/probe.c     | 31 +++++++++++++++++++++++++++++--
>  drivers/pci/setup-bus.c |  3 +++
>  include/linux/pci.h     |  1 +
>  5 files changed, 53 insertions(+), 2 deletions(-)
> @@ -801,8 +813,23 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev 
> *dev, int max, int pass)
>  
>       pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
>       primary = buses & 0xFF;
> -     secondary = (buses >> 8) & 0xFF;
> -     subordinate = (buses >> 16) & 0xFF;
> +     if (dev->ea_cap) {
> +             u32 dw1;
> +
> +             pci_read_config_dword(dev, dev->ea_cap + 4, &dw1);
> +             if (dw1 & 0xFF)
> +                     secondary = dw1 & 0xFF;
> +             else
> +                     secondary = (buses >> 8) & 0xFF;
> +
> +             if ((dw1 >> 8) & 0xFF)
> +                     subordinate = (dw1 >> 8) & 0xFF;
> +             else
> +                     subordinate = (buses >> 16) & 0xFF;
> +     } else {
> +             secondary = (buses >> 8) & 0xFF;
> +             subordinate = (buses >> 16) & 0xFF;
> +     }

We can refactor this to make it cleaner/more compact. from V3 review:


        secondary = (buses >> 8) & 0xFF;
        subordinate = (buses >> 16) & 0xFF;
        if (dev->ea_cap) {
                u32 sdw;
                
                pci_read_config_dword(dev, dev->ea_cap + 4, &sdw);
                
                if (sdw & 0xFF)
                        secondary = sdw & 0xFF;
                
                sdw >>= 8;
                if (sdw & 0xFF)
                        subordinate = sdw & 0xFF;
        }


-Sean
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to