From: Ian Abbott <abbo...@mev.co.uk>
3.12-stable review patch. If anyone has any objections, please let me know.
===============
commit 423b24c37dd5794a674c74b0ed56392003a69891 upstream
`devpriv->ai_timer` is used while an asynchronous command is running on
the AI subdevice. It also gets modified by the subdevice's `cmdtest`
handler for checking new asynchronous commands
(`usbduxsigma_ai_cmdtest()`), which is not correct as it's allowed to
check new commands while an old command is still running. Fix it by
moving the code which sets up `devpriv->ai_timer` and
`devpriv->ai_interval` into the subdevice's `cmd` handler,
`usbduxsigma_ai_cmd()`.
** This backported patch also moves the code that sets up
`devpriv->ai_sample_count` and `devpriv->ai_continuous` from
`usbduxsigma_ai_cmdtest()` to `usbduxsigma_ai_cmd()` for the same reason
as above. (This was not needed in the upstream commit.) **
Note that the removed code in `usbduxsigma_ai_cmdtest()` checked that
`devpriv->ai_timer` did not end up less than than 1, but that could not
happen because `cmd->scan_begin_arg` had already been checked to be at
least the minimum required value (at least when `cmd->scan_begin_src ==
TRIG_TIMER`, which had also been checked to be the case).
Fixes: b986be8527c7 ("staging: comedi: usbduxsigma: tidy up analog input
command support)
Signed-off-by: Ian Abbott <abbo...@mev.co.uk>
Signed-off-by: Jiri Slaby <jsl...@suse.cz>
---
drivers/staging/comedi/drivers/usbduxsigma.c | 58 +++++++++++++---------------
1 file changed, 27 insertions(+), 31 deletions(-)
diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c
b/drivers/staging/comedi/drivers/usbduxsigma.c
index c47f4087568f..c61a1b9d7cd8 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -575,37 +575,6 @@ static int usbduxsigma_ai_cmdtest(struct comedi_device
*dev,
if (err)
return 3;
- /* Step 4: fix up any arguments */
-
- if (high_speed) {
- /*
- * every 2 channels get a time window of 125us. Thus, if we
- * sample all 16 channels we need 1ms. If we sample only one
- * channel we need only 125us
- */
- devpriv->ai_interval = interval;
- devpriv->ai_timer = cmd->scan_begin_arg / (125000 * interval);
- } else {
- /* interval always 1ms */
- devpriv->ai_interval = 1;
- devpriv->ai_timer = cmd->scan_begin_arg / 1000000;
- }
- if (devpriv->ai_timer < 1)
- err |= -EINVAL;
-
- if (cmd->stop_src == TRIG_COUNT) {
- /* data arrives as one packet */
- devpriv->ai_sample_count = cmd->stop_arg;
- devpriv->ai_continuous = 0;
- } else {
- /* continuous acquisition */
- devpriv->ai_continuous = 1;
- devpriv->ai_sample_count = 0;
- }
-
- if (err)
- return 4;
-
return 0;
}
@@ -704,6 +673,33 @@ static int usbduxsigma_ai_cmd(struct comedi_device *dev,
/* set current channel of the running acquisition to zero */
s->async->cur_chan = 0;
+
+ if (devpriv->high_speed) {
+ /*
+ * every 2 channels get a time window of 125us. Thus, if we
+ * sample all 16 channels we need 1ms. If we sample only one
+ * channel we need only 125us
+ */
+ unsigned int interval = usbduxsigma_chans_to_interval(len);
+
+ devpriv->ai_interval = interval;
+ devpriv->ai_timer = cmd->scan_begin_arg / (125000 * interval);
+ } else {
+ /* interval always 1ms */
+ devpriv->ai_interval = 1;
+ devpriv->ai_timer = cmd->scan_begin_arg / 1000000;
+ }
+
+ if (cmd->stop_src == TRIG_COUNT) {
+ /* data arrives as one packet */
+ devpriv->ai_sample_count = cmd->stop_arg;
+ devpriv->ai_continuous = 0;
+ } else {
+ /* continuous acquisition */
+ devpriv->ai_continuous = 1;
+ devpriv->ai_sample_count = 0;
+ }
+
for (i = 0; i < len; i++) {
unsigned int chan = CR_CHAN(cmd->chanlist[i]);
--
2.6.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
