Hi Kishon, Is there any more change that you want me to make with this patch series?
Thanks, Ray On 9/21/2015 10:17 AM, Ray Jui wrote: > This patch series adds support for the Cygnus PCIe PHY > > This patch series is based on Linux v4.3-rc1 and is avaliable in: > https://github.com/Broadcom/cygnus-linux/tree/cygnus-pcie-phy-v5 > > Changes from v4: > - Add comment to explain the required 50 ms wait after PCIe AFE is brought > up > - Change some of 'dev_info' print to 'dev_dbg' > > Changes from v3: > - Modify the driver to use child node to represent each PCIe PHY > - Update device tree binding document and examples accordingly > - Add owner filed in phy ops > > Changes from v2: > - Dropped MDC/MDIO bus driver since it's not needed to enable/disable the > analog-front-end of the PCIe Serdes on Cygnus > - Optimized delay waiting for PCIe analog-front-end to be fully enabled > - Reduce the #phy-cell to 1 since now the MDIO PHY ID is not required > > Changes from v1: > - Move the MDC/MDIO bus driver from drivers/phy/* to drivers/bus/* > - Make the PCIe PHY device node child node of the MDIO bus > - Change the PCIe PHY driver to tristate so it can be compiled as a module > - Other minor changes > > Ray Jui (2): > dt-bindings: Add Cygnus PCIe PHY binding doc > phy: cygnus: pcie: Add Cygnus PCIe PHY support > > .../bindings/phy/brcm,cygnus-pcie-phy.txt | 47 +++++ > drivers/phy/Kconfig | 9 + > drivers/phy/Makefile | 1 + > drivers/phy/phy-bcm-cygnus-pcie.c | 213 > +++++++++++++++++++++ > 4 files changed, 270 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt > create mode 100644 drivers/phy/phy-bcm-cygnus-pcie.c > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
