A couple of comments - see below.
On Fri, Sep 09, 2005 at 04:49:27AM +0200, Mathias Adam wrote:
> --- linux-2.6.13-org/drivers/serial/8250.c 2005-08-29 01:41:01.000000000
> +0200
> +++ linux-2.6.13/drivers/serial/8250.c 2005-09-09 02:16:49.000000000
> +0200
> @@ -1665,7 +1665,7 @@
> struct uart_8250_port *up = (struct uart_8250_port *)port;
> unsigned char cval, fcr = 0;
> unsigned long flags;
> - unsigned int baud, quot;
> + unsigned int baud, quot, max_baud;
>
> switch (termios->c_cflag & CSIZE) {
> case CS5:
> @@ -1697,9 +1697,28 @@
> /*
> * Ask the core to calculate the divisor for us.
> */
> - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
> + max_baud = (up->port.type == PORT_16C950 ? port->uartclk/4 :
> port->uartclk/16);
> + baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
> quot = serial8250_get_divisor(port, baud);
>
> + /*
> + * 16C950 supports additional prescaler ratios between 1:16 and 1:4
> + * thus increasing max baud rate to uartclk/4. The following was taken
> + * from kernel 2.4 by Mathias Adam <[EMAIL PROTECTED]> to make the
> Socket
> + * Bluetooth CF Card work under 2.6.13.
> + */
> + if (up->port.type == PORT_16C950) {
> + unsigned int baud_base = port->uartclk/16;
baud_base appears unused.
> + if (baud <= port->uartclk/16)
> + serial_icr_write(up, UART_TCR, 0);
> + else if (baud <= port->uartclk/8) {
> + serial_icr_write(up, UART_TCR, 0x8);
> + } else if (baud <= port->uartclk/4) {
> + serial_icr_write(up, UART_TCR, 0x4);
> + } else
> + serial_icr_write(up, UART_TCR, 0);
baud can't be larger than port->uartclk/4 since you limited it above.
> + }
> +
> /*
> * Oxford Semi 952 rev B workaround
> */
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
