On Sat, Sep 05, 2015 at 07:10:49PM +0200, Robert Jarzmik wrote:
> Russell King - ARM Linux <li...@arm.linux.org.uk> writes:
>
> > On Sat, Sep 05, 2015 at 03:48:38PM +0200, Robert Jarzmik wrote:
> >> This time I took my JTAG to have a look at the flow, in
> >> arch/arm/mm/alignment.c,
> >> where I added the small chunk in [2], which gave in my case :
> >> RJK: fault=4 instr=0x00000000 instrptr=0xc02b37c8 thumb_mode=0
> >> tinstr=0x0000
> >
> > Right, so as fault is nonzero, this means that we were unable to read the
> > instruction. That seems mad though - the instruction pointer is certainly
> > valid, and as we're using probe_kernel_address(), that switches to the
> > kernel "segment" before trying to read kernel addresses. That should
> > mean that __copy_from_user_inatomic() is able to read the instruction.
> >
> > I think this is the root cause of the issue.
>
> And there is more madness to come : I tried to "reread" the instruction [1] a
> second time if the first result was 4 :
> RJK: fault=4 instr=0x00000000(@c385d72c) instrptr=0xc02b39e8 thumb_mode=0
> tinstr=0x0000
> RJK: reread instruction: [0xc02b39e8] = 0x10c650b2: 0
>
> Guess what, the second probe_kernel_address() with the same parameters returns
> 0, and everything works. It's insane.
>
> >> Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
> > It seems you have SW_DOMAIN_PAN enabled.
> That's the default arch/arm/Kconfig implies.
> And ... this is what also _is_ the cause of this behavior : removing
> SW_DOMAIN_PAN makes all my pxa boards work again !!!
>
> Moreover, this is consistent with the fact that this commit is in linux-next
> but
> not in v4.1 :
> a5e090acbf54 ("ARM: software-based priviledged-no-access support")
>
> So the issue is around this SW_DOMAIN_PAN, at least on PXA.
Is it only PXA which seems to be affected?
If so, you may need to add:
mrc p15, 0, \rd, c2, c0, 0
mov \rd, \rd
sub pc, pc, #4
to the places we update the domain access register to ensure that the
Xscale pipeline stalls to allow the CP15 DACR update to hit.
--
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
