Hi, this serie add a driver for the USB phy on the ATH79 SoCs and enable the USB port on the TL-WR1043ND. The phy controller is really trivial as it only use reset lines.
Alban Alban Bedel (4): devicetree: Add bindings for the ATH79 USB phy phy: Add a driver for the ATH79 USB phy MIPS: ath79: Add the EHCI controller and USB phy to the AR9132 dtsi MIPS: ath79: Enable the USB port on the TL-WR1043ND .../devicetree/bindings/phy/phy-ath79-usb.txt | 18 ++++ arch/mips/boot/dts/qca/ar9132.dtsi | 24 +++++ arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts | 4 + drivers/phy/Kconfig | 8 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-ath79-usb.c | 115 +++++++++++++++++++++ 6 files changed, 170 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-ath79-usb.txt create mode 100644 drivers/phy/phy-ath79-usb.c -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
