Signed-off-by: Lee Jones <lee.jo...@linaro.org>
---
 .../devicetree/bindings/remoteproc/st-rproc.txt    | 38 ++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/st-rproc.txt

diff --git a/Documentation/devicetree/bindings/remoteproc/st-rproc.txt 
b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
new file mode 100644
index 0000000..6a933c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
@@ -0,0 +1,38 @@
+STMicroelectronics Remote Processor
+-----------------------------------
+
+This binding provides support for adjunct processors found on ST SoCs.
+
+The remote processors can be controlled from the bootloader or the primary OS.
+If the bootloader starts a remote processor processor the primary OS must 
detect
+its state and act accordingly.
+
+The node name is significant, as it defines the name of the CPU and the name
+of the firmware to load: "rproc-<name>-fw".
+
+Required properties:
+- compatible           Should be one of:
+                               "st,st231-rproc"
+                               "st,st40-rproc"
+- reg                  Size and length of reserved co-processor memory
+- resets               Reset lines (See: ../reset/reset.txt)
+- reset-names          Must be "sw_reset" and "pwr_reset"
+- clocks               Clock for co-processor (See: 
../clock/clock-bindings.txt)
+- clock-names          Must be "rproc_clk"
+- clock-frequency      Clock frequency to set co-processor at if the bootloader
+                       hasn't already done so
+- st,syscfg-boot       The register that holds the boot vector for the 
co-processor
+
+Example:
+
+       st231-audio@bae00000 {
+               compatible      = "st,st231-rproc";
+               reg             = <0xbae00000 0x01000000>;
+               reg-names       = "rproc_mem";
+               resets          = <&softreset STIH407_ST231_AUD_SOFTRESET>;
+               reset-names     = "sw_reset";
+               clocks          = <&clk_s_c0_flexgen CLK_ST231_AUD_0>;
+               clock-names     = "rproc_clk";
+               clock-frequency = <600000000>;
+               st,syscfg-boot  = <&syscfg_core 0x228>;
+       };
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to