On 14/08/15 09:38, maoguang.m...@mediatek.com wrote:
From: Maoguang Meng <maoguang.m...@mediatek.com>
This patch implement irq_set_wake to get who is wakeup source and
setup on suspend resume.
Signed-off-by: Maoguang Meng <maoguang.m...@mediatek.com>
---
changes since v3:
-add a comment in mtk_eint_chip_read_mask.
-delete ALIGN when allocate eint_offsets.ports.
-fix unrelated change.
changes since v2:
-modify irq_wake to handle irq wakeup source.
-allocate two buffers separately.
-fix some codestyle.
Changes since v1:
-implement irq_wake handler.
---
drivers/pinctrl/mediatek/pinctrl-mt8173.c | 1 +
drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 91 ++++++++++++++++++++++++++-
drivers/pinctrl/mediatek/pinctrl-mtk-common.h | 4 ++
3 files changed, 95 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8173.c
b/drivers/pinctrl/mediatek/pinctrl-mt8173.c
index d0c811d..ad27184 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8173.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8173.c
@@ -385,6 +385,7 @@ static struct platform_driver mtk_pinctrl_driver = {
.driver = {
.name = "mediatek-mt8173-pinctrl",
.of_match_table = mt8173_pctrl_match,
+ .pm = &mtk_eint_pm_ops,
},
};
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
index ad1ea16..fe34ce9 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
@@ -33,6 +33,7 @@
#include <linux/mfd/syscon.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/pm.h>
#include <dt-bindings/pinctrl/mt65xx.h>
#include "../core.h"
@@ -1062,6 +1063,77 @@ static int mtk_eint_set_type(struct irq_data *d,
return 0;
}
+static int mtk_eint_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+ struct mtk_pinctrl *pctl = irq_data_get_irq_chip_data(d);
+ int shift = d->hwirq & 0x1f;
+ int reg = d->hwirq >> 5;
+
+ if (on)
+ pctl->wake_mask[reg] |= BIT(shift);
+ else
+ pctl->wake_mask[reg] &= ~BIT(shift);
+
+ return 0;
+}
Does this pinmux controller:
1. Support wake-up configuration ? If not, you need to use
IRQCHIP_SKIP_SET_WAKE. I don't see any value in writing the
mask_{set,clear} if the same registers are used for {en,dis}able
2. Is in always on domain ? If not, you need save/restore only to
resume back the functionality. Generally we can set
IRQCHIP_MASK_ON_SUSPEND to ensure non-wake-up interrupts are
disabled during suspend and re-enabled in resume path. You just
save/restore raw values without tracking the wake-up source.
Also I see that no care is taken to set the port irq as wake enable
source. It may work with current mainline, but won't with -next. Please
ensure the port irq to the parent interrupt controller remains
enabled(i.e set as wake).
Regards,
Sudeep
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
