lyz, On Tue, Aug 11, 2015 at 12:56 AM, Yunzhi Li <l...@rock-chips.com> wrote: > Signed-off-by: Yunzhi Li <l...@rock-chips.com> > --- > > Documentation/devicetree/bindings/usb/dwc2.txt | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt > b/Documentation/devicetree/bindings/usb/dwc2.txt > index fd132cb..6a84099 100644 > --- a/Documentation/devicetree/bindings/usb/dwc2.txt > +++ b/Documentation/devicetree/bindings/usb/dwc2.txt > @@ -24,6 +24,12 @@ Refer to phy/phy-bindings.txt for generic phy consumer > properties > - g-rx-fifo-size: size of rx fifo size in gadget mode. > - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode. > - g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in > gadget mode. > +- resets: A list of phandle + reset-specifier pairs for the resets listed in > + reset-names > +- reset-names: Should contain the following: > + "ahb": AHB interface reset > + "phy": PHY reset > + "con": controller reset
Would it be worth it to leave the "phy" out? You don't use it in the driver yet and it's unclear to me whether it belongs here or as part of "rockchip,rk3288-usb-phy"? -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
