On Tue, Jul 28, 2015 at 05:43:55PM +0300, Claudiu Manoil wrote:
> Add basic support for all the eTSEC controllers on the
> ls1021a SoC. Second interrupt group register blocks
> and their corresponding Rx/Tx/Err interrupt sources are
> included as well for each eTSEC node.
>
> Signed-off-by: Alison Wang <alison.w...@freescale.com>
> Signed-off-by: Claudiu Manoil <claudiu.man...@freescale.com>
Applied both with a minor change below.
> ---
> v2: various findings, added 2nd interrupt group;
> v3: addressed findings from Shawn Guo -
> - initial patch split in soc, boards and bindings patches;
> - removed redundant all zero local-mac-address;
> - subject prefix;
>
> arch/arm/boot/dts/ls1021a.dtsi | 88
> ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 88 insertions(+)
>
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index 1b306c7..0638cda 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -59,6 +59,9 @@
> serial3 = &lpuart3;
> serial4 = &lpuart4;
> serial5 = &lpuart5;
> + ethernet0 = &enet0;
> + ethernet1 = &enet1;
> + ethernet2 = &enet2;
I moved these above serial to keep them sort alphabetically.
Shawn
> sysclk = &sysclk;
> };
>
> @@ -391,6 +394,91 @@
> reg = <0x0 0x2d24000 0x0 0x4000>;
> };
>
> + enet0: ethernet@2d10000 {
> + compatible = "fsl,etsec2";
> + device_type = "network";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-parent = <&gic>;
> + model = "eTSEC";
> + fsl,magic-packet;
> + ranges;
> +
> + queue-group@2d10000 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + reg = <0x0 0x2d10000 0x0 0x1000>;
> + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + queue-group@2d14000 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + reg = <0x0 0x2d14000 0x0 0x1000>;
> + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + enet1: ethernet@2d50000 {
> + compatible = "fsl,etsec2";
> + device_type = "network";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-parent = <&gic>;
> + model = "eTSEC";
> + ranges;
> +
> + queue-group@2d50000 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + reg = <0x0 0x2d50000 0x0 0x1000>;
> + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + queue-group@2d54000 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + reg = <0x0 0x2d54000 0x0 0x1000>;
> + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + enet2: ethernet@2d90000 {
> + compatible = "fsl,etsec2";
> + device_type = "network";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-parent = <&gic>;
> + model = "eTSEC";
> + ranges;
> +
> + queue-group@2d90000 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + reg = <0x0 0x2d90000 0x0 0x1000>;
> + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + queue-group@2d94000 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + reg = <0x0 0x2d94000 0x0 0x1000>;
> + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> usb@8600000 {
> compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
> reg = <0x0 0x8600000 0x0 0x1000>;
> --
> 1.7.11.7
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
