4.1-stable review patch. If anyone has any objections, please let me know.
------------------ From: Felipe Balbi <[email protected]> commit e18b7975c885bc3a938b9a76daf32957ea0235fa upstream. In case of non-Isochronous transfers, we don't want to clear DWC3_EP_BUSY flag until XferComplete event. That's because XferInProgress was only enabled so we can recycle TRBs and usb_requests quicker, but there are still other pending requests being transferred. In order to make sure we don't allow for another StartTransfer command while the HW is still processing other transfers, we must keep DWC3_EP_BUSY flag set and this what this patch does. Fixes: f3af36511e60 (usb: dwc3: gadget: always enable IOC on bulk/interrupt transfers) Reported-by: sundeep subbaraya <[email protected]> Tested-by: sundeep subbaraya <[email protected]> Signed-off-by: Felipe Balbi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/usb/dwc3/gadget.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1906,12 +1906,16 @@ static void dwc3_endpoint_transfer_compl { unsigned status = 0; int clean_busy; + u32 is_xfer_complete; + + is_xfer_complete = (event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE); if (event->status & DEPEVT_STATUS_BUSERR) status = -ECONNRESET; clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status); - if (clean_busy) + if (clean_busy && (is_xfer_complete || + usb_endpoint_xfer_isoc(dep->endpoint.desc))) dep->flags &= ~DWC3_EP_BUSY; /* -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
