Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security System) drivers by default. EXTCON is needed by the updated sun4i USB PHY driver.
While at it, enable FHANDLE, which is needed by systemd and newer versions of udev. Also enable CGROUPS for systemd. And get rid of POWER_RESET, as the sun6i power reset driver has been removed in favor of proper sun6i watchdog support. Signed-off-by: Chen-Yu Tsai <w...@csie.org> --- arch/arm/configs/sunxi_defconfig | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 7ebc346bf9fa..51eea220baae 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -1,5 +1,7 @@ +CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_PERF_EVENTS=y CONFIG_MODULES=y @@ -72,12 +74,12 @@ CONFIG_SERIAL_OF_PLATFORM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MV64XXX=y +CONFIG_I2C_SUN6I_P2WI=y CONFIG_SPI=y CONFIG_SPI_SUN4I=y CONFIG_SPI_SUN6I=y CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY=y -CONFIG_POWER_RESET=y CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_WATCHDOG=y @@ -109,7 +111,12 @@ CONFIG_RTC_CLASS=y # CONFIG_RTC_INTF_PROC is not set CONFIG_RTC_DRV_SUN6I=y CONFIG_RTC_DRV_SUNXI=y +CONFIG_DMADEVICES=y +CONFIG_DMA_SUN6I=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXTCON=y +CONFIG_PWM=y +CONFIG_PWM_SUN4I=y CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_SUN9I_USB=y CONFIG_EXT4_FS=y @@ -123,3 +130,4 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_FS=y +CONFIG_CRYPTO_DEV_SUN4I_SS=y -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
