On 29/07/15 20:27, Jon Hunter wrote:
>
> On 29/07/15 19:33, Russell King - ARM Linux wrote:
>> On Wed, Jul 29, 2015 at 03:43:04PM +0100, Jon Hunter wrote:
>>> The gic_init_bases() function initialises an array that stores the mapping
>>> between the GIC and CPUs. This array is a global array that is
>>> unconditionally initialised on every call to gic_init_bases(). Although,
>>> it is not common for there to be more than one GIC instance, there are
>>> some devices that do support nested GIC controllers and gic_init_bases()
>>> can be called more than once.
>>>
>>> A 2nd call to gic_init_bases() will clear the previous CPU mapping and
>>> will only setup the mapping again for CPU0. This is because for child GIC
>>> controllers there is most likely only one recipient of the interrupt.
>>>
>>> Fix this by moving the CPU mapping array to the GIC chip data structure
>>> so that it is initialised for each GIC instance separately. It is assumed
>>> that the bL switcher code is only interested in the root or primary GIC
>>> instance.
>>
>> Does it make sense to expose the per-CPU-ness of the non-primary GIC?
>> If they are chained off a primary GIC SPI interrupt, then all IRQs on
>> the secondary GIC are routed to the same CPU that the SPI on the primary
>> GIC is routed to.
>
> I am looking at a use-case where there is a secondary GIC and the secondary
> GIC is used as a interrupt router between the main CPU cluster and another
> CPU. So in this case the mapping of a secondary is still of interest. This
> patch does not address setting up the secondary mapping, but avoids a
> secondary GIC overwriting the primary map (which we don't want).
>
>> Other features like the PPIs and SGIs in the secondary CPU should also
>> be ignored - they probably aren't used anyway.
>
> Yes, agree.
>
>> I have to say though... are the 1020 IRQs that the primary GIC provides
>> really not enough? What insane hardware needs more than 1020 IRQs?
>
> Ha. I guess some realview boards for a start ...
>
> # grep -r "gic_init(1" arch/arm/
> arch/arm/mach-realview/realview_pb1176.c: gic_init(1,
> IRQ_PB1176_GIC_START,
> arch/arm/mach-realview/realview_eb.c: gic_init(1, 96,
> __io_address(REALVIEW_EB_GIC_DIST_BASE),
> arch/arm/mach-realview/realview_pb11mp.c: gic_init(1,
> IRQ_PB11MP_GIC_START,
Different use case. These are development boards with a relatively
modular design, where the SoC may or may not have a GIC by itself. When
it has one, you end up with the on-board GIC being a secondary one.
I never thought someone would quote these designs as an example to
follow... ;-)
M.
--
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
