early console in setup code
Probing EDD (edd=off to disable)... ok
[    0.000000] Linux version 4.2.0-rc3-00001-g4696b88 (kbuild@roam) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Thu Jul 23 02:24:58 CST 2015
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x1000000
[    0.000000] MTRR: Disabled
[    0.000000] initial memory mapped: [mem 0x00000000-0x043fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x13800000-0x139fffff]
[    0.000000]  [mem 0x13800000-0x139fffff] page 4k
[    0.000000] BRK [0x03f8f000, 0x03f8ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x137fffff]
[    0.000000]  [mem 0x00100000-0x137fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x13a00000-0x13fdffff]
[    0.000000]  [mem 0x13a00000-0x13fdffff] page 4k
[    0.000000] BRK [0x03f90000, 0x03f90fff] PGTABLE
[    0.000000] BRK [0x03f91000, 0x03f91fff] PGTABLE
[    0.000000] BRK [0x03f92000, 0x03f92fff] PGTABLE
[    0.000000] BRK [0x03f93000, 0x03f93fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x13bcd000-0x13fd7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0C90 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x0000000013FE18BD 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x0000000013FE0B37 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x0000000013FE0040 000AF7 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x0000000013FE0000 000040
[    0.000000] ACPI: SSDT 0x0000000013FE0BAB 000C5A (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x0000000013FE1805 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x0000000013FE1885 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffb000 (        fee00000)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 319MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 13fe0000
[    0.000000]   low ram: 0 - 13fe0000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:13fdf001, primary cpu clock
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000001000-0x0000000013fdffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000013fdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000013fdffff]
[    0.000000] On node 0 totalpages: 81790
[    0.000000] free_area_init_node: node 0, pgdat c28e0580, node_mem_map d3706020
[    0.000000]   Normal zone: 640 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 81790 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffb000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 335 pages/cpu @d3468000 s1351408 r0 d20752 u1372160
[    0.000000] pcpu-alloc: s1351408 r0 d20752 u1372160 alloc=335*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 1346ba00
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 81150
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-i386-49/bisect_boot-1-yocto-minimal-i386.cgz-i386-randconfig-b0-07230031-4696b8874d7de39850931888bc9f2aa12d29fb46-20150723-41015-1mmlb4d-0.yaml ARCH=i386 kconfig=i386-randconfig-b0-07230031 branch=linux-devel/devel-hourly-2015072223 commit=4696b8874d7de39850931888bc9f2aa12d29fb46 BOOT_IMAGE=/pkg/linux/i386-randconfig-b0-07230031/gcc-4.9/4696b8874d7de39850931888bc9f2aa12d29fb46/vmlinuz-4.2.0-rc3-00001-g4696b88 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-i386/yocto-minimal-i386.cgz/i386-randconfig-b0-07230031/gcc-4.9/4696b8874d7de39850931888bc9f2aa12d29fb46/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-kbuild-yocto-i386-49::dhcp drbd.minor_count=8
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 268064K/327160K available (16058K kernel code, 5515K rwdata, 8296K rodata, 2280K init, 16368K bss, 59096K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffe6e000 - 0xfffff000   (1604 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xd47e0000 - 0xffbfe000   ( 692 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd3fe0000   ( 319 MB)
[    0.000000]       .init : 0xc2d2e000 - 0xc2f68000   (2280 kB)
[    0.000000]       .data : 0xc1faeeef - 0xc2d2cf00   (13816 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1faeeef   (16059 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Running RCU self tests
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=c0248000 soft=c024a000
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 5167 kB
[    0.000000]  per task-struct memory footprint: 2112 bytes
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.508 MHz processor
[    0.006666] Calibrating delay loop (skipped) preset value.. 5389.47 BogoMIPS (lpj=8978360)
[    0.006666] pid_max: default: 32768 minimum: 301
[    0.006797] ACPI: Core revision 20150619
[    0.020918] ACPI: All ACPI Tables successfully acquired
[    0.022033] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.022960] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.025033] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.025784] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.028071] debug: unmapping init [mem 0xc2f68000-0xc2f70fff]
[    0.035745] ftrace: allocating 49682 entries in 98 pages
[    0.053763] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.054282] enabled ExtINT on CPU#0
[    0.056760] ENABLING IO-APIC IRQs
[    0.057054] init IO_APIC IRQs
[    0.057301]  apic 0 pin 0 not connected
[    0.057672] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.058344] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.058974] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.059649] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.059999] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.059999] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.059999] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.059999] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.059999] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.059999] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.059999] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.059999] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.059999] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.059999] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.059999] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.059999]  apic 0 pin 16 not connected
[    0.059999]  apic 0 pin 17 not connected
[    0.059999]  apic 0 pin 18 not connected
[    0.059999]  apic 0 pin 19 not connected
[    0.059999]  apic 0 pin 20 not connected
[    0.059999]  apic 0 pin 21 not connected
[    0.059999]  apic 0 pin 22 not connected
[    0.059999]  apic 0 pin 23 not connected
[    0.059999] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059999] Using local APIC timer interrupts.
[    0.059999] calibrating APIC timer ...
[    0.059999] ... lapic delta = 6250148
[    0.059999] ... PM-Timer delta = 357996
[    0.059999] ... PM-Timer result ok
[    0.059999] ..... delta 6250148
[    0.059999] ..... mult: 268441839
[    0.059999] ..... calibration result: 3333412
[    0.059999] ..... CPU clock speed is 2694.0336 MHz.
[    0.059999] ..... host bus clock speed is 1000.0412 MHz.
[    0.060058] smpboot: CPU0: Intel QEMU Virtual CPU version 2.1.2 (fam: 06, model: 06, stepping: 03)
[    0.061120] Performance Events: Broken PMU hardware detected, using software events only.
[    0.066672] Failed to access perfctr msr (MSR c2 is 0)
[    0.070514] CPU 1 irqstacks, hard=d2d36000 soft=d2d38000
[    0.071149] x86: Booting SMP configuration:
[    0.071608] .... node  #0, CPUs:      #1
[    0.003333] Initializing CPU#1
[    0.006666] kvm-clock: cpu 1, msr 0:13fdf041, secondary cpu clock
[    0.006666] masked ExtINT on CPU#1
[    0.076794] KVM setup async PF for cpu 1
[    0.076830] x86: Booted up 1 node, 2 CPUs
[    0.076840] ----------------
[    0.076841] | NMI testsuite:
[    0.076841] --------------------
[    0.076794]   remote IPI:
[    0.076794] kvm-stealtime: cpu 1, msr 135baa00
[    0.086708]   ok  |
[    0.086917]    local IPI:  ok  |
[    0.106683] --------------------
[    0.106957] Good, all   2 testcases passed! |
[    0.107287] ---------------------------------
[    0.107619] smpboot: Total of 2 processors activated (10778.95 BogoMIPS)
[    0.109358] devtmpfs: initialized
[    0.114135] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.115599] prandom: seed boundary self test passed
[    0.116471] prandom: 100 self tests passed
[    0.116682] pinctrl core: initialized pinctrl subsystem
[    0.117502] RTC time:  2:26:59, date: 07/23/15
[    0.119043] NET: Registered protocol family 16
[    0.130021] cpuidle: using governor ladder
[    0.140017] cpuidle: using governor menu
[    0.151376] ACPI: bus type PCI registered
[    0.151739] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.152326] PCI: PCI BIOS revision 2.10 entry at 0xfd456, last bus=0
[    0.194929] ACPI: Added _OSI(Module Device)
[    0.195321] ACPI: Added _OSI(Processor Device)
[    0.195668] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.196111] ACPI: Added _OSI(Processor Aggregator Device)
[    0.205463] ACPI: Interpreter enabled
[    0.205816] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[    0.206544] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.207139] ACPI: (supports S0 S3 S5)
[    0.207432] ACPI: Using IOAPIC for interrupt routing
[    0.207903] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.232927] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.233348] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    0.234065] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.238345] acpiphp: Slot [3] registered
[    0.238780] acpiphp: Slot [4] registered
[    0.239254] acpiphp: Slot [5] registered
[    0.239690] acpiphp: Slot [6] registered
[    0.240124] acpiphp: Slot [7] registered
[    0.240548] acpiphp: Slot [8] registered
[    0.240968] acpiphp: Slot [9] registered
[    0.241388] acpiphp: Slot [10] registered
[    0.241823] acpiphp: Slot [11] registered
[    0.242256] acpiphp: Slot [12] registered
[    0.242735] acpiphp: Slot [13] registered
[    0.243159] acpiphp: Slot [14] registered
[    0.243458] acpiphp: Slot [15] registered
[    0.243887] acpiphp: Slot [16] registered
[    0.244312] acpiphp: Slot [17] registered
[    0.244742] acpiphp: Slot [18] registered
[    0.245177] acpiphp: Slot [19] registered
[    0.245638] acpiphp: Slot [20] registered
[    0.246070] acpiphp: Slot [21] registered
[    0.246671] acpiphp: Slot [22] registered
[    0.247102] acpiphp: Slot [23] registered
[    0.247534] acpiphp: Slot [24] registered
[    0.247961] acpiphp: Slot [25] registered
[    0.248396] acpiphp: Slot [26] registered
[    0.248830] acpiphp: Slot [27] registered
[    0.249302] acpiphp: Slot [28] registered
[    0.249747] acpiphp: Slot [29] registered
[    0.250123] acpiphp: Slot [30] registered
[    0.250558] acpiphp: Slot [31] registered
[    0.250898] PCI host bridge to bus 0000:00
[    0.251220] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.251642] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.252155] pci_bus 0000:00: root bus resource [io  0x0d00-0xadff window]
[    0.252714] pci_bus 0000:00: root bus resource [io  0xae0f-0xaeff window]
[    0.253220] pci_bus 0000:00: root bus resource [io  0xaf20-0xafdf window]
[    0.253340] pci_bus 0000:00: root bus resource [io  0xafe4-0xffff window]
[    0.253852] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.254417] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff window]
[    0.255027] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.257181] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.258707] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.262413] pci 0000:00:01.1: reg 0x20: [io  0xc080-0xc08f]
[    0.263941] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.264486] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.264973] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.265565] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.267065] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.267872] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.268424] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.269799] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[    0.271384] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[    0.273349] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff]
[    0.280016] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.281346] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.283001] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.284466] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.290578] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.291876] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.293920] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    0.295475] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    0.302562] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    0.303649] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f]
[    0.308467] pci_bus 0000:00: on NUMA node 0
[    0.310764] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.311642] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.312526] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.313381] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.314066] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.317218] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.317659] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.318262] vgaarb: loaded
[    0.318476] vgaarb: bridge control possible 0000:00:02.0
[    0.320384] ACPI: bus type USB registered
[    0.320843] usbcore: registered new interface driver usbfs
[    0.321333] usbcore: registered new interface driver hub
[    0.321843] usbcore: registered new device driver usb
[    0.322758] pps_core: LinuxPPS API ver. 1 registered
[    0.323141] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.323369] PTP clock support registered
[    0.324206] Advanced Linux Sound Architecture Driver Initialized.
[    0.324859] PCI: Using ACPI for IRQ routing
[    0.325187] PCI: pci_cache_line_size set to 32 bytes
[    0.325706] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.326676] e820: reserve RAM buffer [mem 0x13fe0000-0x13ffffff]
[    0.328504] NET: Registered protocol family 23
[    0.328959] NET: Registered protocol family 8
[    0.329332] NET: Registered protocol family 20
[    0.331315] clocksource: Switched to clocksource kvm-clock
[    0.333278] Warning: could not register all branches stats
[    0.333498] Warning: could not register annotated branches stats
[    0.387689] FS-Cache: Loaded
[    0.388069] pnp: PnP ACPI init
[    0.388796] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.389646] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.390485] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.391106] pnp 00:03: [dma 2]
[    0.391539] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.392363] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.393187] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.394830] pnp: PnP ACPI: found 6 devices
[    0.431942] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.433139] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.433638] pci_bus 0000:00: resource 5 [io  0x0d00-0xadff window]
[    0.434105] pci_bus 0000:00: resource 6 [io  0xae0f-0xaeff window]
[    0.434569] pci_bus 0000:00: resource 7 [io  0xaf20-0xafdf window]
[    0.435029] pci_bus 0000:00: resource 8 [io  0xafe4-0xffff window]
[    0.435492] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window]
[    0.436002] pci_bus 0000:00: resource 10 [mem 0x14000000-0xfebfffff window]
[    0.436760] NET: Registered protocol family 2
[    0.438113] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.438864] TCP bind hash table entries: 4096 (order: 5, 180224 bytes)
[    0.439830] TCP: Hash tables configured (established 4096 bind 4096)
[    0.440409] UDP hash table entries: 256 (order: 2, 24576 bytes)
[    0.440885] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
[    0.441702] NET: Registered protocol family 1
[    0.442710] RPC: Registered named UNIX socket transport module.
[    0.443178] RPC: Registered udp transport module.
[    0.443532] RPC: Registered tcp transport module.
[    0.443888] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.444433] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.444897] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.445377] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.445865] pci 0000:00:02.0: Video device with shadowed ROM
[    0.446328] PCI: CLS 0 bytes, default 32
[    0.447073] Unpacking initramfs...
[    0.901305] debug: unmapping init [mem 0xd3bcd000-0xd3fd7fff]
[    0.906652] PCLMULQDQ-NI instructions are not detected.
[    0.907186] spin_lock-torture:--- Start of test [debug]: nwriters_stress=4 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[    0.908586] spin_lock-torture: Creating torture_shuffle task
[    0.909172] spin_lock-torture: Creating torture_stutter task
[    0.909626] spin_lock-torture: torture_shuffle task started
[    0.910101] spin_lock-torture: Creating lock_torture_writer task
[    0.910107] spin_lock-torture: torture_stutter task started
[    0.911132] spin_lock-torture: Creating lock_torture_writer task
[    0.911606] spin_lock-torture: lock_torture_writer task started
[    0.912155] spin_lock-torture: Creating lock_torture_writer task
[    0.912165] spin_lock-torture: lock_torture_writer task started
[    0.913185] spin_lock-torture: Creating lock_torture_writer task
[    0.913658] spin_lock-torture: lock_torture_writer task started
[    0.914155] spin_lock-torture: Creating lock_torture_stats task
[    0.914162] spin_lock-torture: lock_torture_writer task started
[    0.916484] spin_lock-torture: lock_torture_stats task started
[    0.917219] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.917769] Initialise system trusted keyring
[    0.918253] audit: initializing netlink subsys (disabled)
[    0.918779] audit: type=2000 audit(1437589619.688:1): initialized
[    0.921825] zbud: loaded
[    0.924893] NFS: Registering the id_resolver key type
[    0.925383] Key type id_resolver registered
[    0.925707] Key type id_legacy registered
[    0.926419] FS-Cache: Netfs 'cifs' registered for caching
[    0.928312] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.929015] fuse init (API version 7.23)
[    0.930049] ceph: loaded (mds proto 32)
[    0.937225] NET: Registered protocol family 38
[    0.937653] Key type asymmetric registered
[    0.937991] Asymmetric key parser 'x509' registered
[    0.938371] Key type pkcs7_test registered
[    0.938734] start plist test
[    0.942786] end plist test
[    0.943012] test_string_helpers: Running tests...
[    0.944507] test_hexdump: Running tests...
[    0.945234] test_firmware: interface ready
[    0.945574] Running rhashtable test nelem=8, max_size=65536, shrinking=0
[    0.946073] Test 00:
[    0.947378]   Adding 50000 keys
[    1.188403] Info: encountered resize
[    1.236511]   Traversal complete: counted=53693, nelems=50000, entries=50000, table-jumps=1
[    1.237170] Test failed: Total count mismatch ^^^
[    1.349335]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.350027]   Deleting 50000 keys
[    1.478982]   Duration of test: 531316778 ns
[    1.479391] Test 01:
[    1.480610]   Adding 50000 keys
[    1.725835] Info: encountered resize
[    1.768793]   Traversal complete: counted=53661, nelems=50000, entries=50000, table-jumps=1
[    1.769433] Test failed: Total count mismatch ^^^
[    1.876259]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    1.876949]   Deleting 50000 keys
[    2.009064]   Duration of test: 528199307 ns
[    2.009503] tsc: Refined TSC clocksource calibration: 2693.506 MHz
[    2.009971] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d347b2dd9, max_idle_ns: 440795223616 ns
[    2.010764] Test 02:
[    2.011980]   Adding 50000 keys
[    2.316507]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.426769]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.427428]   Deleting 50000 keys
[    2.559168]   Duration of test: 546898314 ns
[    2.559576] Test 03:
[    2.560790]   Adding 50000 keys
[    2.808672] Info: encountered resize
[    2.853316]   Traversal complete: counted=53523, nelems=50000, entries=50000, table-jumps=1
[    2.853967] Test failed: Total count mismatch ^^^
[    2.964606]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.965280]   Deleting 50000 keys
[    3.104745]   Duration of test: 543697315 ns
[    3.105178] Average test time: 537527928
[    3.106021] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[    3.106417] crc32: self tests passed, processed 225944 bytes in 240740 nsec
[    3.107177] crc32c: CRC_LE_BITS = 32
[    3.107455] crc32c: self tests passed, processed 225944 bytes in 120641 nsec
[    3.124091] crc32_combine: 8373 self tests passed
[    3.140457] crc32c_combine: 8373 self tests passed
[    3.141267] rbtree testing -> 14967 cycles
[    3.809867] augmented rbtree testing -> 22653 cycles
[    4.825202] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.825645] cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
[    4.826369] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.834214] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
[    4.836699] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[    4.838186] vmlfb: initializing
[    4.838852] no IO addresses supplied
[    4.839562] hgafb: HGA card not detected.
[    4.839906] hgafb: probe of hgafb.0 failed with error -22
[    4.840682] usbcore: registered new interface driver smscufx
[    5.165527] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-3)
[    5.166062] uvesafb: vbe_init() failed with -22
[    5.166445] uvesafb: probe of uvesafb.0 failed with error -22
[    5.167045] intel_idle: does not run on family 6 model 6
[    6.006868] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    6.007381] virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
[    6.737661] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    6.766188] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    6.772077] lp: driver loaded but no devices found
[    6.772502] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[    6.773052] ac.o: No PCI boards found.
[    6.773345] ac.o: For an ISA board you must supply memory and irq parameters.
[    6.774231] Non-volatile memory driver v1.3
[    6.774655] ppdev: user-space parallel port driver
[    6.775327] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[    6.775895] platform pc8736x_gpio.0: no device found
[    6.776645] nsc_gpio initializing
[    6.776912] Linux agpgart interface v0.103
[    6.778663] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    6.779595] [drm] Initialized drm 1.1.0 20060810
[    6.781519] parport_pc 00:04: reported by Plug and Play ACPI
[    6.782289] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[    6.784013] lp0: using parport0 (interrupt-driven).
[    6.784436] lp0: console ready
[    6.789987] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
[    6.790688] dummy-irq: no IRQ given.  Use irq=N
[    6.791351] Phantom Linux Driver, version n0.9.8, init OK
[    6.792552] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[    6.793613] c2port c2port0: C2 port uc added
[    6.793941] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[    6.795379] usbcore: registered new interface driver rtsx_usb
[    6.798571] device id = 2440
[    6.798834] device id = 2480
[    6.799074] device id = 24c0
[    6.799316] device id = 24d0
[    6.799551] device id = 25a1
[    6.799788] device id = 2670
[    6.800219] platform physmap-flash.0: failed to claim resource 0
[    6.801353] slram: not enough parameters.
[    6.801674] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.
[    6.802267] pmc551: not detected
[    6.838605] No valid DiskOnChip devices found
[    6.839119] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    6.839836] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    6.840555] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    6.841303] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    6.841993] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    6.842700] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    6.843440] nand: device found, Manufacturer ID: 0x98, Chip ID: 0x39
[    6.843914] nand: Toshiba NAND 128MiB 1,8V 8-bit
[    6.844268] nand: 128 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16
[    6.844978] flash size: 128 MiB
[    6.845233] page size: 512 bytes
[    6.845493] OOB area size: 16 bytes
[    6.845765] sector size: 16 KiB
[    6.846006] pages number: 262144
[    6.846269] pages per sector: 32
[    6.846516] bus width: 8
[    6.846715] bits in sector size: 14
[    6.846980] bits in page size: 9
[    6.847234] bits in OOB size: 4
[    6.847475] flash size with OOB: 135168 KiB
[    6.847835] page address bytes: 4
[    6.848093] sector address bytes: 3
[    6.848366] options: 0x42
[    6.849256] Scanning device for bad blocks
[    6.904803] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit":
[    6.905314] 0x000000000000-0x000008000000 : "NAND simulator partition 0"
[    6.907495] HSI/SSI char device loaded
[    6.912337] arcnet loaded.
[    6.912566] arcnet: RFC1201 "standard" (`a') encapsulation support loaded.
[    6.913085] arcnet: raw mode (`r') encapsulation support loaded.
[    6.913553] arcnet: cap mode (`c') encapsulation support loaded.
[    6.914034] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.)
[    6.914630] E-mail me if you actually test this driver, please!
[    6.915074]  arc%d: No autoprobe for IO mapped cards; you must specify the base address!
[    6.915718] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    6.916253] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    7.520829] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[    7.837366] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[    7.838029] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    7.838856] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
[    7.839311] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.840028] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
[    7.840575] igb: Copyright (c) 2007-2014 Intel Corporation.
[    7.841264] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.0.1-k
[    7.841854] ixgbe: Copyright (c) 1999-2014 Intel Corporation.
[    7.843019] usbcore: registered new interface driver irda-usb
[    7.845150] usbcore: registered new interface driver mcs7780
[    7.845794] usbcore: registered new interface driver kingsun-sir
[    7.846439] usbcore: registered new interface driver ks959-sir
[    7.849133] NET3 PLIP version 2.4-parport gniibe@mri.co.jp
[    7.849561] plip0: Parallel port at 0x378, using IRQ 7.
[    7.849993] PPP generic driver version 2.4.2
[    7.917048] PPP BSD Compression module registered
[    7.917467] PPP Deflate Compression module registered
[    7.917928] PPP MPPE Compression module registered
[    7.918318] NET: Registered protocol family 24
[    7.918918] Loaded prism54 driver, version 1.2
[    7.920731] usbcore: registered new interface driver r8152
[    7.921441] usbcore: registered new interface driver asix
[    7.922032] usbcore: registered new interface driver cdc_ether
[    7.922667] usbcore: registered new interface driver cdc_eem
[    7.923312] usbcore: registered new interface driver dm9601
[    7.923912] usbcore: registered new interface driver CoreChips
[    7.924613] usbcore: registered new interface driver gl620a
[    7.925254] usbcore: registered new interface driver plusb
[    7.925841] usbcore: registered new interface driver rndis_host
[    7.926476] usbcore: registered new interface driver cdc_subset
[    7.927137] usbcore: registered new interface driver zaurus
[    7.927833] usbcore: registered new interface driver int51x1
[    7.928406] usbcore: registered new interface driver sierra_net
[    7.929038] usbcore: registered new interface driver cdc_ncm
[    7.929690] usbcore: registered new interface driver qmi_wwan
[    7.933492] usbcore: registered new interface driver cdc_mbim
[    7.938666] usbcore: registered new interface driver hwa-rc
[    7.939308] usbcore: registered new interface driver i1480-dfu-usb
[    7.942626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.943145] ehci-pci: EHCI PCI platform driver
[    7.943732] ehci-platform: EHCI generic platform driver
[    7.944634] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.945241] ohci-pci: OHCI PCI platform driver
[    7.945809] ohci-platform: OHCI generic platform driver
[    7.946417] uhci_hcd: USB Universal Host Controller Interface driver
[    7.947803] usbcore: registered new interface driver wusb-cbaf
[    7.948398] usbcore: registered new interface driver usblp
[    7.948939] usbcore: registered new interface driver cdc_wdm
[    7.949480] usbcore: registered new interface driver usbtmc
[    7.950070] usbcore: registered new interface driver mdc800
[    7.950521] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[    7.951194] usbcore: registered new interface driver adutux
[    7.951873] usbcore: registered new interface driver appledisplay
[    7.952453] usbcore: registered new interface driver cypress_cy7c63
[    7.953040] usbcore: registered new interface driver emi62 - firmware loader
[    7.953689] usbcore: registered new interface driver idmouse
[    7.954231] usbcore: registered new interface driver iowarrior
[    7.954800] usbcore: registered new interface driver isight_firmware
[    7.955407] usbcore: registered new interface driver usblcd
[    7.955961] usbcore: registered new interface driver usbled
[    7.956508] usbcore: registered new interface driver legousbtower
[    7.957083] usbcore: registered new interface driver usbtest
[    7.957632] usbcore: registered new interface driver usb_ehset_test
[    7.958214] usbcore: registered new interface driver trancevibrator
[    7.959196] usbcore: registered new interface driver uss720
[    7.959997] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
[    7.961288] uss720: NOTE: this is a special purpose driver to allow nonstandard
[    7.962304] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
[    7.963319] uss720: If you just want to connect to a printer, use usblp instead
[    7.964604] usbcore: registered new interface driver usbsevseg
[    7.965906] usbcore: registered new interface driver sisusb
[    7.966911] usbcore: registered new interface driver lvs
[    7.967872] usbcore: registered new interface driver cxacru
[    7.968890] usbcore: registered new interface driver speedtch
[    7.969902] usbcore: registered new interface driver ueagle-atm
[    7.972439] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005
[    7.973645] dummy_hcd dummy_hcd.0: Dummy host controller
[    7.975708] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1
[    7.977823] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.978827] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.979859] usb usb1: Product: Dummy host controller
[    7.980575] usb usb1: Manufacturer: Linux 4.2.0-rc3-00001-g4696b88 dummy_hcd
[    7.981562] usb usb1: SerialNumber: dummy_hcd.0
[    7.985604] hub 1-0:1.0: USB hub found
[    7.986326] hub 1-0:1.0: 1 port detected
[    7.994122] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
[    7.995021] usbip_core: usbip_core_init:761: USB/IP Core v1.0.0
[    7.996398] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    7.999632] serio: i8042 KBD port at 0x60,0x64 irq 1
[    8.000513] serio: i8042 AUX port at 0x60,0x64 irq 12
[    8.003364] parport0: cannot grant exclusive access for device parkbd
[    8.007915] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    8.010441] evbug: Connected device: input0 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[    8.014929] usbcore: registered new interface driver appletouch
[    8.015974] usbcore: registered new interface driver bcm5974
[    8.182645] usbcore: registered new interface driver synaptics_usb
[    8.185013] mk712: device not present
[    8.185436] usbcore: registered new interface driver usbtouchscreen
[    8.188544] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[    8.189246] usbcore: registered new interface driver ati_remote2
[    8.189794] cm109: Keymap for Komunikate KIP1000 phone loaded
[    8.190367] usbcore: registered new interface driver cm109
[    8.190787] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[    8.251718] i2c /dev entries driver
[    8.253160] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[    8.260293] usbcore: registered new interface driver i2c-diolan-u2c
[    8.260779] i2c-parport: adapter type unspecified
[    8.261260] usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF
[    8.262005] usbcore: registered new interface driver i2c-tiny-usb
[    8.262901] pps_parport: parallel port PPS client
[    8.263279] parport0: cannot grant exclusive access for device pps_parport
[    8.263799] pps_parport: couldn't register with parport0
[    8.264303] Driver for 1-wire Dallas network protocol.
[    8.265198] usbcore: registered new interface driver DS9490R
[    8.268996] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[    8.269739] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[    8.395785] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    8.396971] evbug: Connected device: input2 (ImExPS/2 Generic Explorer Mouse at isa0060/serio1/input0)
[    9.345800] intel_powerclamp: Intel powerclamp does not run on family 6 model 6
[    9.348035] Modular ISDN core version 1.1.29
[    9.349427] NET: Registered protocol family 34
[    9.350097] mISDN: Layer-1-over-IP driver Rev. 2.00
[    9.351112] 0 virtual devices registered
[    9.351925] b1pci: revision 1.1.2.2
[    9.352520] b1: revision 1.1.2.2
[    9.353014] b1dma: revision 1.1.2.3
[    9.353542] b1pci: revision 1.1.2.2
[    9.354317] c4: revision 1.1.2.2
[    9.355042] usbcore: registered new interface driver HFC-S_USB
[    9.355927] AVM Fritz PCI driver Rev. 2.3
[    9.356689] Infineon ISDN Driver Rev. 1.0
[    9.357446] mISDNipac module version 2.0
[    9.358074] sdhci: Secure Digital Host Controller Interface driver
[    9.358952] sdhci: Copyright(c) Pierre Ossman
[    9.362567] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    9.363318] wbsd: Copyright(c) Pierre Ossman
[    9.364403] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    9.365754] usbcore: registered new interface driver vub300
[    9.366494] usbcore: registered new interface driver ushc
[    9.367230] sdhci-pltfm: SDHCI platform and OF driver helper
[    9.379291] iw_cm: couldn't register sysctl paths
[    9.381574] rdma_ucm: couldn't register sysctl paths
[    9.385397] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    9.386717] hidraw: raw HID events driver (C) Jiri Kosina
[    9.398746] acerhdf: error getting hardware information
[    9.399505] Initializing HPQ6001 module
[    9.400992] intel_oaktrail: Platform not recognized (You could try the module's force-parameter)
[    9.404557] Software Queue-Pair Transport over NTB, version 4
[    9.406108]  fake-fmc-carrier: mezzanine 0
[    9.406664]       Manufacturer: fake-vendor
[    9.407164]       Product name: fake-design-for-testing
[    9.408195] fmc fake-design-for-testing-f001: Driver has no ID: matches all
[    9.409157] fmc_trivial: probe of fake-design-for-testing-f001 failed with error -95
[    9.410225] fmc fake-design-for-testing-f001: Driver has no ID: matches all
[    9.411748] fmc_chardev fake-design-for-testing-f001: Created misc device "fake-design-for-testing-f001"
[    9.415230] Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98
[    9.416183] aedsp16: I/O, IRQ and DMA are mandatory
[    9.416764] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
[    9.417674] ad1848: No ISAPnP cards found, trying standard ones...
[    9.418423] sb: Init: Starting Probe...
[    9.419102] sb: Init: Done
[    9.419528] Cyrix Kahlua VSA1 XpressAudio support (c) Copyright 2003 Red Hat Inc
[    9.420677] uart6850: irq and io must be set.
[    9.421212] MIDI Loopback device driver
[    9.431489] oprofile: using NMI interrupt.
[    9.432163] pktgen: Packet Generator for packet performance testing. Version: 2.75
[   11.025234] usb usb1: dummy_bus_suspend
[   11.025743] NET: Registered protocol family 26
[   11.026903] Mirror/redirect action on
[   11.028808] netem: version 1.3
[   11.029462] Netfilter messages via NETLINK v0.30.
[   11.030403] nf_conntrack version 0.5.0 (4188 buckets, 16752 max)
[   11.031677] ctnetlink v0.93: registering with nfnetlink.
[   11.032509] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[   11.033503] ip_set: protocol 6
[   11.033980] IPVS: Registered protocols (UDP, SCTP, AH)
[   11.034702] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[   11.035744] IPVS: Creating netns size=1376 id=0
[   11.036968] IPVS: ipvs loaded.
[   11.037393] IPVS: [rr] scheduler registered.
[   11.037912] IPVS: [wrr] scheduler registered.
[   11.038444] IPVS: [fo] scheduler registered.
[   11.038993] ipip: IPv4 over IPv4 tunneling driver
[   11.041324] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.042467] geneve_core: Geneve core logic
[   11.042973] Initializing XFRM netlink socket
[   11.043941] NET: Registered protocol family 10
[   11.046624] mip6: Mobile IPv6
[   11.047068] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.050787] ip6_gre: GRE over IPv6 tunneling driver
[   11.052990] NET: Registered protocol family 17
[   11.053608] NET: Registered protocol family 15
[   11.054339] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   11.055891] NET: Registered protocol family 5
[   11.058860] RPC: Registered rdma transport module.
[   11.059625] l2tp_core: L2TP core driver, V2.0
[   11.060181] l2tp_netlink: L2TP netlink interface
[   11.060823] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[   11.061592] l2tp_debugfs: L2TP debugfs support
[   11.062139] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[   11.063301] DECnet: Routing cache hash table of 256 buckets, 11Kbytes
[   11.064145] NET: Registered protocol family 12
[   11.064777] NET: Registered protocol family 35
[   11.065469] 8021q: 802.1Q VLAN Support v1.8
[   11.066146] sctp: Hash tables configured (established 1365 bind 1489)
[   11.066831] lib80211: common routines for IEEE802.11 drivers
[   11.067284] lib80211_crypt: registered algorithm 'NULL'
[   11.067802] lib80211_crypt: registered algorithm 'WEP'
[   11.068222] lib80211_crypt: registered algorithm 'CCMP'
[   11.068632] lib80211_crypt: registered algorithm 'TKIP'
[   11.069041] tipc: Activated (version 2.0.0)
[   11.069461] NET: Registered protocol family 30
[   11.070287] tipc: Started in single node mode
[   11.070813] Key type dns_resolver registered
[   11.071279] Key type ceph registered
[   11.074031] libceph: loaded (mon/osd proto 15/24)
[   11.074453] openvswitch: Open vSwitch switching datapath
[   11.075118] mpls_gso: MPLS GSO support
[   11.087921] ... APIC ID:      00000000 (0)
[   11.088380] ... APIC VERSION: 01050014
[   11.088793] 0000000000000000000000000000000000000000000000000000000000000000
[   11.088913] 0000000000000000000000000000000000000000000000000000000000000000
[   11.088913] 0000000000000000000000000000000000000000000000000000000000008000
[   11.088913] 
[   11.091740] number of MP IRQ sources: 15.
[   11.092090] number of IO-APIC #0 registers: 24.
[   11.092461] testing the IO APIC.......................
[   11.092853] IO APIC #0......
[   11.093075] .... register #00: 00000000
[   11.093383] .......    : physical APIC id: 00
[   11.093713] .......    : Delivery Type: 0
[   11.094012] .......    : LTS          : 0
[   11.094339] .... register #01: 00170011
[   11.094699] .......     : max redirection entries: 17
[   11.095071] .......     : PRQ implemented: 0
[   11.095400] .......     : IO APIC version: 11
[   11.095747] .... register #02: 00000000
[   11.096036] .......     : arbitration: 00
[   11.096342] .... IRQ redirection table:
[   11.096630] IOAPIC 0:
[   11.096828]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.097419]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(03), M(1)
[   11.098057]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
[   11.098645]  pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.099282]  pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.099871]  pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.100477]  pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.101104]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(03), M(1)
[   11.101714]  pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.102333]  pin09, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.102922]  pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.103523]  pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.104110]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(03), M(1)
[   11.104759]  pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.105348]  pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.105955]  pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.106561]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.107163]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.107796]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.108388]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.108992]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.109583]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.110183]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.110768]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.111391] IRQ to pin mappings:
[   11.111638] IRQ0 -> 0:2
[   11.111853] IRQ1 -> 0:1
[   11.112066] IRQ3 -> 0:3
[   11.112309] IRQ4 -> 0:4
[   11.112522] IRQ5 -> 0:5
[   11.112734] IRQ6 -> 0:6
[   11.112945] IRQ7 -> 0:7
[   11.113165] IRQ8 -> 0:8
[   11.113391] IRQ9 -> 0:9
[   11.113605] IRQ10 -> 0:10
[   11.113829] IRQ11 -> 0:11
[   11.114054] IRQ12 -> 0:12
[   11.114293] IRQ13 -> 0:13
[   11.114576] IRQ14 -> 0:14
[   11.114801] IRQ15 -> 0:15
[   11.115026] .................................... done.
[   11.115486] Using IPI No-Shortcut mode
[   11.116851] Loading compiled-in X.509 certificates
[   11.117338] page_owner is disabled
[   11.119276] Key type encrypted registered
[   11.122767]   Magic number: 7:318:410
[   11.123360] misc ecryptfs: hash matches
[   11.124090] hctosys: unable to open rtc device (rtc0)
[   11.126097] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[   11.131570] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.132683] 8021q: adding VLAN 0 to HW filter on device eth0
[   11.133865] IP-Config: Failed to open irlan0
[   11.145643] Sending DHCP requests .
[   11.165629] plip0: transmit timeout(1,d9)
[   13.169764] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   13.170985] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   14.573442] ., OK
[   14.590137] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
[   14.593073] IP-Config: Complete:
[   14.593500]      device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
[   14.594637]      host=vm-kbuild-yocto-i386-49, domain=, nis-domain=(none)
[   14.595446]      bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=
[   14.596194]      nameserver0=10.0.2.3
[   14.596805] ALSA device list:
[   14.597185]   No soundcards found.
[   14.598993] debug: unmapping init [mem 0xc2d2e000-0xc2f67fff]
/etc/rcS.d/S00fbsetup: line 3: /sbin/modprobe: No such file or directory

Please wait: booting...
Starting udev
/etc/rcS.d/S03udev: line 72: /proc/sys/kernel/hotplug: No such file or directory
Kernel tests: Boot OK!
[   16.030472] random: trinity urandom read with 10 bits of entropy available
[   26.118033] sock: process `trinity-main' is using obsolete setsockopt SO_BSDCOMPAT

[   31.195899] VFS: Warning: trinity-c0 using old stat() call. Recompile your binary.
[   61.000088] Writes:  Total: 4  Max/Min: 0/0   Fail: 0 
Sending all processes the KILL signal...
Unmounting remote filesystems...
Deactivating swap...
Unmounting local filesystems...
Rebooting... 
[   93.810166] Unregister pv shared memory for cpu 0
[   93.810824] Unregister pv shared memory for cpu 1
[   93.811547] spin_lock-torture: Unscheduled system shutdown detected
[   93.822329] torture thread torture_shuffle parking due to system shutdown
[   93.827499] torture thread torture_stutter parking due to system shutdown
[   94.280119] reboot: Restarting system
[   94.280490] reboot: machine restart

Elapsed time: 100
qemu-system-i386 -enable-kvm -kernel /pkg/linux/i386-randconfig-b0-07230031/gcc-4.9/4696b8874d7de39850931888bc9f2aa12d29fb46/vmlinuz-4.2.0-rc3-00001-g4696b88 -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-i386-49/bisect_boot-1-yocto-minimal-i386.cgz-i386-randconfig-b0-07230031-4696b8874d7de39850931888bc9f2aa12d29fb46-20150723-41015-1mmlb4d-0.yaml ARCH=i386 kconfig=i386-randconfig-b0-07230031 branch=linux-devel/devel-hourly-2015072223 commit=4696b8874d7de39850931888bc9f2aa12d29fb46 BOOT_IMAGE=/pkg/linux/i386-randconfig-b0-07230031/gcc-4.9/4696b8874d7de39850931888bc9f2aa12d29fb46/vmlinuz-4.2.0-rc3-00001-g4696b88 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-i386/yocto-minimal-i386.cgz/i386-randconfig-b0-07230031/gcc-4.9/4696b8874d7de39850931888bc9f2aa12d29fb46/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-kbuild-yocto-i386-49::dhcp drbd.minor_count=8'  -initrd /fs/sdd1/initrd-vm-kbuild-yocto-i386-49 -m 320 -smp 2 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/sdd1/disk0-vm-kbuild-yocto-i386-49,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-kbuild-yocto-i386-49 -serial file:/dev/shm/kboot/serial-vm-kbuild-yocto-i386-49 -daemonize -display none -monitor null 
