So we can find out ZO position easily during run-time for kasl buffer
searching.
Current code is using extract_offset to control copied kernel position, it
will put the copied kernel in the middle of buffer when kernel run size is
bigger than decompressed needed buffer size.
Current layout:
when init_size is the same as kernel run_size:
run_size
0 extract_offset init_size
|------------------|------------------------|
VO text/data VO bss/brk
input ZO text ZO data
This patch try to:
move ZO to the end of buffer instead of middle of the buffer.
When init_size is bigger than kernel run size, will have
0 run_size init_size
|--------------------------------|----------|
VO text/data VO bss/brk
input ZO text ZO data
We already have init_size the buffer size, we can find the end easily
when copying ZO before decompressing.
Signed-off-by: Yinghai Lu <ying...@kernel.org>
---
arch/x86/boot/compressed/head_32.S | 11 +++++++++--
arch/x86/boot/compressed/head_64.S | 8 ++++++--
arch/x86/boot/compressed/mkpiggy.c | 7 ++-----
arch/x86/boot/compressed/vmlinux.lds.S | 1 +
arch/x86/boot/header.S | 2 +-
arch/x86/kernel/asm-offsets.c | 1 +
arch/x86/kernel/vmlinux.lds.S | 1 +
7 files changed, 21 insertions(+), 10 deletions(-)
diff --git a/arch/x86/boot/compressed/head_32.S
b/arch/x86/boot/compressed/head_32.S
index 8ef964d..0c140f9 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -148,7 +148,9 @@ preferred_addr:
1:
/* Target address to relocate to for decompression */
- addl $z_extract_offset, %ebx
+ movl BP_init_size(%esi), %eax
+ subl $_end, %eax
+ addl %eax, %ebx
/* Set up the stack */
leal boot_stack_end(%ebx), %esp
@@ -210,8 +212,13 @@ relocated:
/* push arguments for decompress_kernel: */
pushl $z_run_size /* size of kernel with .bss and .brk */
pushl $z_output_len /* decompressed length, end of relocs */
- leal z_extract_offset_negative(%ebx), %ebp
+
+ movl BP_init_size(%esi), %eax
+ subl $_end, %eax
+ movl %ebx, %ebp
+ subl %eax, %ebp
pushl %ebp /* output address */
+
pushl $z_input_len /* input_len */
leal input_data(%ebx), %eax
pushl %eax /* input_data */
diff --git a/arch/x86/boot/compressed/head_64.S
b/arch/x86/boot/compressed/head_64.S
index b0c0d16..67dd8d3 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -102,7 +102,9 @@ ENTRY(startup_32)
1:
/* Target address to relocate to for decompression */
- addl $z_extract_offset, %ebx
+ movl BP_init_size(%esi), %eax
+ subl $_end, %eax
+ addl %eax, %ebx
/*
* Prepare for entering 64 bit mode
@@ -330,7 +332,9 @@ preferred_addr:
1:
/* Target address to relocate to for decompression */
- leaq z_extract_offset(%rbp), %rbx
+ movl BP_init_size(%rsi), %ebx
+ subl $_end, %ebx
+ addq %rbp, %rbx
/* Set up the stack */
leaq boot_stack_end(%rbx), %rsp
diff --git a/arch/x86/boot/compressed/mkpiggy.c
b/arch/x86/boot/compressed/mkpiggy.c
index d8222f2..5faad09 100644
--- a/arch/x86/boot/compressed/mkpiggy.c
+++ b/arch/x86/boot/compressed/mkpiggy.c
@@ -83,11 +83,8 @@ int main(int argc, char *argv[])
printf("z_input_len = %lu\n", ilen);
printf(".globl z_output_len\n");
printf("z_output_len = %lu\n", (unsigned long)olen);
- printf(".globl z_extract_offset\n");
- printf("z_extract_offset = 0x%lx\n", offs);
- /* z_extract_offset_negative allows simplification of head_32.S */
- printf(".globl z_extract_offset_negative\n");
- printf("z_extract_offset_negative = -0x%lx\n", offs);
+ printf(".globl z_min_extract_offset\n");
+ printf("z_min_extract_offset = 0x%lx\n", offs);
printf(".globl z_run_size\n");
printf("z_run_size = %lu\n", run_size);
diff --git a/arch/x86/boot/compressed/vmlinux.lds.S
b/arch/x86/boot/compressed/vmlinux.lds.S
index 34d047c..e24e0a0 100644
--- a/arch/x86/boot/compressed/vmlinux.lds.S
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -70,5 +70,6 @@ SECTIONS
_epgtable = . ;
}
#endif
+ . = ALIGN(PAGE_SIZE); /* keep ZO size page aligned */
_end = .;
}
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 16ef025..9bfab22 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -440,7 +440,7 @@ setup_data: .quad 0 # 64-bit
physical pointer to
pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr
-#define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_extract_offset)
+#define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_min_extract_offset)
#define VO_INIT_SIZE (VO__end - VO__text)
#if ZO_INIT_SIZE > VO_INIT_SIZE
#define INIT_SIZE ZO_INIT_SIZE
diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
index 8e3d22a1..d2e00bc 100644
--- a/arch/x86/kernel/asm-offsets.c
+++ b/arch/x86/kernel/asm-offsets.c
@@ -87,6 +87,7 @@ void common(void) {
OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
OFFSET(BP_version, boot_params, hdr.version);
OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment);
+ OFFSET(BP_init_size, boot_params, hdr.init_size);
OFFSET(BP_pref_address, boot_params, hdr.pref_address);
OFFSET(BP_code32_start, boot_params, hdr.code32_start);
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 00bf300..5816920 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -325,6 +325,7 @@ SECTIONS
__brk_limit = .;
}
+ . = ALIGN(PAGE_SIZE); /* keep VO_INIT_SIZE page aligned */
_end = .;
STABS_DEBUG
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
