If we reverse some of the logic and change the formula used,
we can simplify the function greatly.

Signed-off-by: Lee Jones <[email protected]>
---
 drivers/regulator/pwm-regulator.c | 27 +++++++--------------------
 1 file changed, 7 insertions(+), 20 deletions(-)

diff --git a/drivers/regulator/pwm-regulator.c 
b/drivers/regulator/pwm-regulator.c
index b37b616..d5cb267 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -93,26 +93,13 @@ static int pwm_regulator_list_voltage(struct regulator_dev 
*rdev,
 /**
  * Continuous voltage call-backs
  */
-static int pwm_voltage_to_duty_cycle(struct regulator_dev *rdev,
-                                       int volt_mV)
+static int pwm_voltage_to_duty_cycle(struct regulator_dev *rdev, int req_uV)
 {
-       struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
-       int min_mV = rdev->constraints->min_uV / 1000;
-       int max_mV = rdev->constraints->max_uV / 1000;
-       int max_duty_cycle = drvdata->max_duty_cycle;
-       int vdiff = min_mV - max_mV;
-       int pwm_code;
-       int tmp;
-
-       tmp = max_duty_cycle - min_mV * max_duty_cycle / vdiff;
-       pwm_code = tmp + max_duty_cycle * volt_mV / vdiff;
-
-       if (pwm_code < 0)
-               pwm_code = 0;
-       if (pwm_code > max_duty_cycle)
-               pwm_code = max_duty_cycle;
-
-       return pwm_code * 100 / max_duty_cycle;
+       int min_uV = rdev->constraints->min_uV;
+       int max_uV = rdev->constraints->max_uV;
+       int diff = max_uV - min_uV;
+
+       return 100 - ((((req_uV * 100) - (min_uV * 100)) / diff));
 }
 
 static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
@@ -131,7 +118,7 @@ static int pwm_regulator_set_voltage(struct regulator_dev 
*rdev,
        int duty_cycle;
        int ret;
 
-       duty_cycle = pwm_voltage_to_duty_cycle(rdev, min_uV / 1000);
+       duty_cycle = pwm_voltage_to_duty_cycle(rdev, min_uV);
 
        ret = pwm_config(drvdata->pwm,
                         (drvdata->pwm->period / 100) * duty_cycle,
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to