* Dinakar Guniguntala <[EMAIL PROTECTED]> wrote:
> On Mon, Aug 22, 2005 at 09:08:34AM +0200, Ingo Molnar wrote:
> >
> > in terms of 2.6.14, the replacement patch below also does what i always
> > wanted to do: to merge the ia64-specific build_sched_domains() code back
> > into kernel/sched.c. I've done this by taking your improved dynamic
> > build-domains code and putting it into kernel/sched.c.
> >
>
> Ingo, one change required to your patch and the exclusive
> cpuset functionality seems to work fine on a NUMA ppc64 box.
> I am still running some of my dynamic sched domain tests. So far
> it seems to be holding ok.
great! Andrew, i'd suggest we try the merged patch attached below in
-mm.
> Any idea why the ia64 stuff was forked in the first place?
most of the NUMA domain-trees stuff happened in the ia64 space so there
was a natural desire to keep it more hackable there. But now i think
it's getting counterproductive.
Ingo
-----
I've already sent this to the maintainers, and this is now being sent to a
larger community audience. I have fixed a problem with the ia64 version of
build_sched_domains(), but a similar fix still needs to be made to the
generic build_sched_domains() in kernel/sched.c.
The "dynamic sched domains" functionality has recently been merged into
2.6.13-rcN that sees the dynamic declaration of a cpu-exclusive (a.k.a.
"isolated") cpuset and rebuilds the CPU Scheduler sched domains and sched
groups to separate away the CPUs in this cpu-exclusive cpuset from the
remainder of the non-isolated CPUs. This allows the non-isolated CPUs to
completely ignore the isolated CPUs when doing load-balancing.
Unfortunately, build_sched_domains() expects that a sched domain will
include all the CPUs of each node in the domain, i.e., that no node will
belong in both an isolated cpuset and a non-isolated cpuset. Declaring
a cpuset that violates this presumption will produce flawed data
structures and will oops the kernel.
To trigger the problem (on a NUMA system with >1 CPUs per node):
cd /dev/cpuset
mkdir newcpuset
cd newcpuset
echo 0 >cpus
echo 0 >mems
echo 1 >cpu_exclusive
I have fixed this shortcoming for ia64 NUMA (with multiple CPUs per node).
A similar shortcoming exists in the generic build_sched_domains() (in
kernel/sched.c) for NUMA, and that needs to be fixed also. The fix involves
dynamically allocating sched_group_nodes[] and sched_group_allnodes[] for
each invocation of build_sched_domains(), rather than using global arrays
for these structures. Care must be taken to remember kmalloc() addresses
so that arch_destroy_sched_domains() can properly kfree() the new dynamic
structures.
This is a patch against 2.6.13-rc6.
Signed-off-by: John Hawkes <[EMAIL PROTECTED]>
reworked the patch to also move the ia64 domain setup code to the generic
code.
Signed-off-by: Ingo Molnar <[EMAIL PROTECTED]>
ppc64 fix
From: Dinakar Guniguntala <[EMAIL PROTECTED]>
arch/ia64/kernel/domain.c | 400 -------------------------------------------
arch/ia64/kernel/Makefile | 2
include/asm-ia64/processor.h | 3
include/asm-ia64/topology.h | 22 --
include/linux/sched.h | 9
include/linux/topology.h | 22 ++
kernel/sched.c | 290 +++++++++++++++++++++++++------
7 files changed, 259 insertions(+), 489 deletions(-)
Index: linux-sched-curr/arch/ia64/kernel/Makefile
===================================================================
--- linux-sched-curr.orig/arch/ia64/kernel/Makefile
+++ linux-sched-curr/arch/ia64/kernel/Makefile
@@ -16,7 +16,7 @@ obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += acp
obj-$(CONFIG_IA64_PALINFO) += palinfo.o
obj-$(CONFIG_IOSAPIC) += iosapic.o
obj-$(CONFIG_MODULES) += module.o
-obj-$(CONFIG_SMP) += smp.o smpboot.o domain.o
+obj-$(CONFIG_SMP) += smp.o smpboot.o
obj-$(CONFIG_NUMA) += numa.o
obj-$(CONFIG_PERFMON) += perfmon_default_smpl.o
obj-$(CONFIG_IA64_CYCLONE) += cyclone.o
Index: linux-sched-curr/arch/ia64/kernel/domain.c
===================================================================
--- linux-sched-curr.orig/arch/ia64/kernel/domain.c
+++ /dev/null
@@ -1,400 +0,0 @@
-/*
- * arch/ia64/kernel/domain.c
- * Architecture specific sched-domains builder.
- *
- * Copyright (C) 2004 Jesse Barnes
- * Copyright (C) 2004 Silicon Graphics, Inc.
- */
-
-#include <linux/sched.h>
-#include <linux/percpu.h>
-#include <linux/slab.h>
-#include <linux/cpumask.h>
-#include <linux/init.h>
-#include <linux/topology.h>
-#include <linux/nodemask.h>
-
-#define SD_NODES_PER_DOMAIN 16
-
-#ifdef CONFIG_NUMA
-/**
- * find_next_best_node - find the next node to include in a sched_domain
- * @node: node whose sched_domain we're building
- * @used_nodes: nodes already in the sched_domain
- *
- * Find the next node to include in a given scheduling domain. Simply
- * finds the closest node not already in the @used_nodes map.
- *
- * Should use nodemask_t.
- */
-static int find_next_best_node(int node, unsigned long *used_nodes)
-{
- int i, n, val, min_val, best_node = 0;
-
- min_val = INT_MAX;
-
- for (i = 0; i < MAX_NUMNODES; i++) {
- /* Start at @node */
- n = (node + i) % MAX_NUMNODES;
-
- if (!nr_cpus_node(n))
- continue;
-
- /* Skip already used nodes */
- if (test_bit(n, used_nodes))
- continue;
-
- /* Simple min distance search */
- val = node_distance(node, n);
-
- if (val < min_val) {
- min_val = val;
- best_node = n;
- }
- }
-
- set_bit(best_node, used_nodes);
- return best_node;
-}
-
-/**
- * sched_domain_node_span - get a cpumask for a node's sched_domain
- * @node: node whose cpumask we're constructing
- * @size: number of nodes to include in this span
- *
- * Given a node, construct a good cpumask for its sched_domain to span. It
- * should be one that prevents unnecessary balancing, but also spreads tasks
- * out optimally.
- */
-static cpumask_t sched_domain_node_span(int node)
-{
- int i;
- cpumask_t span, nodemask;
- DECLARE_BITMAP(used_nodes, MAX_NUMNODES);
-
- cpus_clear(span);
- bitmap_zero(used_nodes, MAX_NUMNODES);
-
- nodemask = node_to_cpumask(node);
- cpus_or(span, span, nodemask);
- set_bit(node, used_nodes);
-
- for (i = 1; i < SD_NODES_PER_DOMAIN; i++) {
- int next_node = find_next_best_node(node, used_nodes);
- nodemask = node_to_cpumask(next_node);
- cpus_or(span, span, nodemask);
- }
-
- return span;
-}
-#endif
-
-/*
- * At the moment, CONFIG_SCHED_SMT is never defined, but leave it in so we
- * can switch it on easily if needed.
- */
-#ifdef CONFIG_SCHED_SMT
-static DEFINE_PER_CPU(struct sched_domain, cpu_domains);
-static struct sched_group sched_group_cpus[NR_CPUS];
-static int cpu_to_cpu_group(int cpu)
-{
- return cpu;
-}
-#endif
-
-static DEFINE_PER_CPU(struct sched_domain, phys_domains);
-static struct sched_group sched_group_phys[NR_CPUS];
-static int cpu_to_phys_group(int cpu)
-{
-#ifdef CONFIG_SCHED_SMT
- return first_cpu(cpu_sibling_map[cpu]);
-#else
- return cpu;
-#endif
-}
-
-#ifdef CONFIG_NUMA
-/*
- * The init_sched_build_groups can't handle what we want to do with node
- * groups, so roll our own. Now each node has its own list of groups which
- * gets dynamically allocated.
- */
-static DEFINE_PER_CPU(struct sched_domain, node_domains);
-static struct sched_group *sched_group_nodes[MAX_NUMNODES];
-
-static DEFINE_PER_CPU(struct sched_domain, allnodes_domains);
-static struct sched_group sched_group_allnodes[MAX_NUMNODES];
-
-static int cpu_to_allnodes_group(int cpu)
-{
- return cpu_to_node(cpu);
-}
-#endif
-
-/*
- * Build sched domains for a given set of cpus and attach the sched domains
- * to the individual cpus
- */
-void build_sched_domains(const cpumask_t *cpu_map)
-{
- int i;
-
- /*
- * Set up domains for cpus specified by the cpu_map.
- */
- for_each_cpu_mask(i, *cpu_map) {
- int group;
- struct sched_domain *sd = NULL, *p;
- cpumask_t nodemask = node_to_cpumask(cpu_to_node(i));
-
- cpus_and(nodemask, nodemask, *cpu_map);
-
-#ifdef CONFIG_NUMA
- if (num_online_cpus()
- > SD_NODES_PER_DOMAIN*cpus_weight(nodemask)) {
- sd = &per_cpu(allnodes_domains, i);
- *sd = SD_ALLNODES_INIT;
- sd->span = *cpu_map;
- group = cpu_to_allnodes_group(i);
- sd->groups = &sched_group_allnodes[group];
- p = sd;
- } else
- p = NULL;
-
- sd = &per_cpu(node_domains, i);
- *sd = SD_NODE_INIT;
- sd->span = sched_domain_node_span(cpu_to_node(i));
- sd->parent = p;
- cpus_and(sd->span, sd->span, *cpu_map);
-#endif
-
- p = sd;
- sd = &per_cpu(phys_domains, i);
- group = cpu_to_phys_group(i);
- *sd = SD_CPU_INIT;
- sd->span = nodemask;
- sd->parent = p;
- sd->groups = &sched_group_phys[group];
-
-#ifdef CONFIG_SCHED_SMT
- p = sd;
- sd = &per_cpu(cpu_domains, i);
- group = cpu_to_cpu_group(i);
- *sd = SD_SIBLING_INIT;
- sd->span = cpu_sibling_map[i];
- cpus_and(sd->span, sd->span, *cpu_map);
- sd->parent = p;
- sd->groups = &sched_group_cpus[group];
-#endif
- }
-
-#ifdef CONFIG_SCHED_SMT
- /* Set up CPU (sibling) groups */
- for_each_cpu_mask(i, *cpu_map) {
- cpumask_t this_sibling_map = cpu_sibling_map[i];
- cpus_and(this_sibling_map, this_sibling_map, *cpu_map);
- if (i != first_cpu(this_sibling_map))
- continue;
-
- init_sched_build_groups(sched_group_cpus, this_sibling_map,
- &cpu_to_cpu_group);
- }
-#endif
-
- /* Set up physical groups */
- for (i = 0; i < MAX_NUMNODES; i++) {
- cpumask_t nodemask = node_to_cpumask(i);
-
- cpus_and(nodemask, nodemask, *cpu_map);
- if (cpus_empty(nodemask))
- continue;
-
- init_sched_build_groups(sched_group_phys, nodemask,
- &cpu_to_phys_group);
- }
-
-#ifdef CONFIG_NUMA
- init_sched_build_groups(sched_group_allnodes, *cpu_map,
- &cpu_to_allnodes_group);
-
- for (i = 0; i < MAX_NUMNODES; i++) {
- /* Set up node groups */
- struct sched_group *sg, *prev;
- cpumask_t nodemask = node_to_cpumask(i);
- cpumask_t domainspan;
- cpumask_t covered = CPU_MASK_NONE;
- int j;
-
- cpus_and(nodemask, nodemask, *cpu_map);
- if (cpus_empty(nodemask))
- continue;
-
- domainspan = sched_domain_node_span(i);
- cpus_and(domainspan, domainspan, *cpu_map);
-
- sg = kmalloc(sizeof(struct sched_group), GFP_KERNEL);
- sched_group_nodes[i] = sg;
- for_each_cpu_mask(j, nodemask) {
- struct sched_domain *sd;
- sd = &per_cpu(node_domains, j);
- sd->groups = sg;
- if (sd->groups == NULL) {
- /* Turn off balancing if we have no groups */
- sd->flags = 0;
- }
- }
- if (!sg) {
- printk(KERN_WARNING
- "Can not alloc domain group for node %d\n", i);
- continue;
- }
- sg->cpu_power = 0;
- sg->cpumask = nodemask;
- cpus_or(covered, covered, nodemask);
- prev = sg;
-
- for (j = 0; j < MAX_NUMNODES; j++) {
- cpumask_t tmp, notcovered;
- int n = (i + j) % MAX_NUMNODES;
-
- cpus_complement(notcovered, covered);
- cpus_and(tmp, notcovered, *cpu_map);
- cpus_and(tmp, tmp, domainspan);
- if (cpus_empty(tmp))
- break;
-
- nodemask = node_to_cpumask(n);
- cpus_and(tmp, tmp, nodemask);
- if (cpus_empty(tmp))
- continue;
-
- sg = kmalloc(sizeof(struct sched_group), GFP_KERNEL);
- if (!sg) {
- printk(KERN_WARNING
- "Can not alloc domain group for node %d\n", j);
- break;
- }
- sg->cpu_power = 0;
- sg->cpumask = tmp;
- cpus_or(covered, covered, tmp);
- prev->next = sg;
- prev = sg;
- }
- prev->next = sched_group_nodes[i];
- }
-#endif
-
- /* Calculate CPU power for physical packages and nodes */
- for_each_cpu_mask(i, *cpu_map) {
- int power;
- struct sched_domain *sd;
-#ifdef CONFIG_SCHED_SMT
- sd = &per_cpu(cpu_domains, i);
- power = SCHED_LOAD_SCALE;
- sd->groups->cpu_power = power;
-#endif
-
- sd = &per_cpu(phys_domains, i);
- power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE *
- (cpus_weight(sd->groups->cpumask)-1) / 10;
- sd->groups->cpu_power = power;
-
-#ifdef CONFIG_NUMA
- sd = &per_cpu(allnodes_domains, i);
- if (sd->groups) {
- power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE *
- (cpus_weight(sd->groups->cpumask)-1) / 10;
- sd->groups->cpu_power = power;
- }
-#endif
- }
-
-#ifdef CONFIG_NUMA
- for (i = 0; i < MAX_NUMNODES; i++) {
- struct sched_group *sg = sched_group_nodes[i];
- int j;
-
- if (sg == NULL)
- continue;
-next_sg:
- for_each_cpu_mask(j, sg->cpumask) {
- struct sched_domain *sd;
- int power;
-
- sd = &per_cpu(phys_domains, j);
- if (j != first_cpu(sd->groups->cpumask)) {
- /*
- * Only add "power" once for each
- * physical package.
- */
- continue;
- }
- power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE *
- (cpus_weight(sd->groups->cpumask)-1) / 10;
-
- sg->cpu_power += power;
- }
- sg = sg->next;
- if (sg != sched_group_nodes[i])
- goto next_sg;
- }
-#endif
-
- /* Attach the domains */
- for_each_online_cpu(i) {
- struct sched_domain *sd;
-#ifdef CONFIG_SCHED_SMT
- sd = &per_cpu(cpu_domains, i);
-#else
- sd = &per_cpu(phys_domains, i);
-#endif
- cpu_attach_domain(sd, i);
- }
- /*
- * Tune cache-hot values:
- */
- calibrate_migration_costs();
-}
-/*
- * Set up scheduler domains and groups. Callers must hold the hotplug lock.
- */
-void arch_init_sched_domains(const cpumask_t *cpu_map)
-{
- cpumask_t cpu_default_map;
-
- /*
- * Setup mask for cpus without special case scheduling requirements.
- * For now this just excludes isolated cpus, but could be used to
- * exclude other special cases in the future.
- */
- cpus_andnot(cpu_default_map, *cpu_map, cpu_isolated_map);
-
- build_sched_domains(&cpu_default_map);
-}
-
-void arch_destroy_sched_domains(const cpumask_t *cpu_map)
-{
-#ifdef CONFIG_NUMA
- int i;
- for (i = 0; i < MAX_NUMNODES; i++) {
- cpumask_t nodemask = node_to_cpumask(i);
- struct sched_group *oldsg, *sg = sched_group_nodes[i];
-
- cpus_and(nodemask, nodemask, *cpu_map);
- if (cpus_empty(nodemask))
- continue;
-
- if (sg == NULL)
- continue;
- sg = sg->next;
-next_sg:
- oldsg = sg;
- sg = sg->next;
- kfree(oldsg);
- if (oldsg != sched_group_nodes[i])
- goto next_sg;
- sched_group_nodes[i] = NULL;
- }
-#endif
-}
-
Index: linux-sched-curr/include/asm-ia64/processor.h
===================================================================
--- linux-sched-curr.orig/include/asm-ia64/processor.h
+++ linux-sched-curr/include/asm-ia64/processor.h
@@ -20,9 +20,6 @@
#include <asm/ptrace.h>
#include <asm/ustack.h>
-/* Our arch specific arch_init_sched_domain is in arch/ia64/kernel/domain.c */
-#define ARCH_HAS_SCHED_DOMAIN
-
#define IA64_NUM_DBG_REGS 8
/*
* Limits for PMC and PMD are set to less than maximum architected values
Index: linux-sched-curr/include/asm-ia64/topology.h
===================================================================
--- linux-sched-curr.orig/include/asm-ia64/topology.h
+++ linux-sched-curr/include/asm-ia64/topology.h
@@ -96,28 +96,6 @@ void build_cpu_to_node_map(void);
.nr_balance_failed = 0, \
}
-/* sched_domains SD_ALLNODES_INIT for IA64 NUMA machines */
-#define SD_ALLNODES_INIT (struct sched_domain) { \
- .span = CPU_MASK_NONE, \
- .parent = NULL, \
- .groups = NULL, \
- .min_interval = 64, \
- .max_interval = 64*num_online_cpus(), \
- .busy_factor = 128, \
- .imbalance_pct = 133, \
- .cache_nice_tries = 1, \
- .busy_idx = 3, \
- .idle_idx = 3, \
- .newidle_idx = 0, /* unused */ \
- .wake_idx = 0, /* unused */ \
- .forkexec_idx = 0, /* unused */ \
- .per_cpu_gain = 100, \
- .flags = SD_LOAD_BALANCE, \
- .last_balance = jiffies, \
- .balance_interval = 64, \
- .nr_balance_failed = 0, \
-}
-
#endif /* CONFIG_NUMA */
#include <asm-generic/topology.h>
Index: linux-sched-curr/include/linux/sched.h
===================================================================
--- linux-sched-curr.orig/include/linux/sched.h
+++ linux-sched-curr/include/linux/sched.h
@@ -546,15 +546,6 @@ struct sched_domain {
extern void partition_sched_domains(cpumask_t *partition1,
cpumask_t *partition2);
-#ifdef ARCH_HAS_SCHED_DOMAIN
-/* Useful helpers that arch setup code may use. Defined in kernel/sched.c */
-extern cpumask_t cpu_isolated_map;
-extern void init_sched_build_groups(struct sched_group groups[],
- cpumask_t span, int (*group_fn)(int cpu));
-extern void cpu_attach_domain(struct sched_domain *sd, int cpu);
-
-#endif /* ARCH_HAS_SCHED_DOMAIN */
-
/*
* Maximum cache size the migration-costs auto-tuning code will
* search from:
Index: linux-sched-curr/include/linux/topology.h
===================================================================
--- linux-sched-curr.orig/include/linux/topology.h
+++ linux-sched-curr/include/linux/topology.h
@@ -133,6 +133,28 @@
}
#endif
+/* sched_domains SD_ALLNODES_INIT for NUMA machines */
+#define SD_ALLNODES_INIT (struct sched_domain) { \
+ .span = CPU_MASK_NONE, \
+ .parent = NULL, \
+ .groups = NULL, \
+ .min_interval = 64, \
+ .max_interval = 64*num_online_cpus(), \
+ .busy_factor = 128, \
+ .imbalance_pct = 133, \
+ .cache_nice_tries = 1, \
+ .busy_idx = 3, \
+ .idle_idx = 3, \
+ .newidle_idx = 0, /* unused */ \
+ .wake_idx = 0, /* unused */ \
+ .forkexec_idx = 0, /* unused */ \
+ .per_cpu_gain = 100, \
+ .flags = SD_LOAD_BALANCE, \
+ .last_balance = jiffies, \
+ .balance_interval = 64, \
+ .nr_balance_failed = 0, \
+}
+
#ifdef CONFIG_NUMA
#ifndef SD_NODE_INIT
#error Please define an appropriate SD_NODE_INIT in include/asm/topology.h!!!
Index: linux-sched-curr/kernel/sched.c
===================================================================
--- linux-sched-curr.orig/kernel/sched.c
+++ linux-sched-curr/kernel/sched.c
@@ -4947,7 +4947,7 @@ static int sd_parent_degenerate(struct s
* Attach the domain 'sd' to 'cpu' as its base domain. Callers must
* hold the hotplug lock.
*/
-void cpu_attach_domain(struct sched_domain *sd, int cpu)
+static void cpu_attach_domain(struct sched_domain *sd, int cpu)
{
runqueue_t *rq = cpu_rq(cpu);
struct sched_domain *tmp;
@@ -4970,7 +4970,7 @@ void cpu_attach_domain(struct sched_doma
}
/* cpus with isolated domains */
-cpumask_t __devinitdata cpu_isolated_map = CPU_MASK_NONE;
+static cpumask_t __devinitdata cpu_isolated_map = CPU_MASK_NONE;
/* Setup the mask of cpus configured for isolated domains */
static int __init isolated_cpu_setup(char *str)
@@ -4998,8 +4998,8 @@ __setup ("isolcpus=", isolated_cpu_setup
* covered by the given span, and will set each group's ->cpumask correctly,
* and ->cpu_power to 0.
*/
-void init_sched_build_groups(struct sched_group groups[],
- cpumask_t span, int (*group_fn)(int cpu))
+static void init_sched_build_groups(struct sched_group groups[], cpumask_t
span,
+ int (*group_fn)(int cpu))
{
struct sched_group *first = NULL, *last = NULL;
cpumask_t covered = CPU_MASK_NONE;
@@ -5513,12 +5513,85 @@ void __devinit calibrate_migration_costs
local_irq_restore(flags);
}
+#define SD_NODES_PER_DOMAIN 16
-#ifdef ARCH_HAS_SCHED_DOMAIN
-extern void build_sched_domains(const cpumask_t *cpu_map);
-extern void arch_init_sched_domains(const cpumask_t *cpu_map);
-extern void arch_destroy_sched_domains(const cpumask_t *cpu_map);
-#else
+#ifdef CONFIG_NUMA
+/**
+ * find_next_best_node - find the next node to include in a sched_domain
+ * @node: node whose sched_domain we're building
+ * @used_nodes: nodes already in the sched_domain
+ *
+ * Find the next node to include in a given scheduling domain. Simply
+ * finds the closest node not already in the @used_nodes map.
+ *
+ * Should use nodemask_t.
+ */
+static int find_next_best_node(int node, unsigned long *used_nodes)
+{
+ int i, n, val, min_val, best_node = 0;
+
+ min_val = INT_MAX;
+
+ for (i = 0; i < MAX_NUMNODES; i++) {
+ /* Start at @node */
+ n = (node + i) % MAX_NUMNODES;
+
+ if (!nr_cpus_node(n))
+ continue;
+
+ /* Skip already used nodes */
+ if (test_bit(n, used_nodes))
+ continue;
+
+ /* Simple min distance search */
+ val = node_distance(node, n);
+
+ if (val < min_val) {
+ min_val = val;
+ best_node = n;
+ }
+ }
+
+ set_bit(best_node, used_nodes);
+ return best_node;
+}
+
+/**
+ * sched_domain_node_span - get a cpumask for a node's sched_domain
+ * @node: node whose cpumask we're constructing
+ * @size: number of nodes to include in this span
+ *
+ * Given a node, construct a good cpumask for its sched_domain to span. It
+ * should be one that prevents unnecessary balancing, but also spreads tasks
+ * out optimally.
+ */
+static cpumask_t sched_domain_node_span(int node)
+{
+ int i;
+ cpumask_t span, nodemask;
+ DECLARE_BITMAP(used_nodes, MAX_NUMNODES);
+
+ cpus_clear(span);
+ bitmap_zero(used_nodes, MAX_NUMNODES);
+
+ nodemask = node_to_cpumask(node);
+ cpus_or(span, span, nodemask);
+ set_bit(node, used_nodes);
+
+ for (i = 1; i < SD_NODES_PER_DOMAIN; i++) {
+ int next_node = find_next_best_node(node, used_nodes);
+ nodemask = node_to_cpumask(next_node);
+ cpus_or(span, span, nodemask);
+ }
+
+ return span;
+}
+#endif
+
+/*
+ * At the moment, CONFIG_SCHED_SMT is never defined, but leave it in so we
+ * can switch it on easily if needed.
+ */
#ifdef CONFIG_SCHED_SMT
static DEFINE_PER_CPU(struct sched_domain, cpu_domains);
static struct sched_group sched_group_cpus[NR_CPUS];
@@ -5540,44 +5613,28 @@ static int cpu_to_phys_group(int cpu)
}
#ifdef CONFIG_NUMA
-
+/*
+ * The init_sched_build_groups can't handle what we want to do with node
+ * groups, so roll our own. Now each node has its own list of groups which
+ * gets dynamically allocated.
+ */
static DEFINE_PER_CPU(struct sched_domain, node_domains);
-static struct sched_group sched_group_nodes[MAX_NUMNODES];
-static int cpu_to_node_group(int cpu)
+static struct sched_group *sched_group_nodes[MAX_NUMNODES];
+
+static DEFINE_PER_CPU(struct sched_domain, allnodes_domains);
+static struct sched_group sched_group_allnodes[MAX_NUMNODES];
+
+static int cpu_to_allnodes_group(int cpu)
{
return cpu_to_node(cpu);
}
#endif
-#if defined(CONFIG_SCHED_SMT) && defined(CONFIG_NUMA)
-/*
- * The domains setup code relies on siblings not spanning
- * multiple nodes. Make sure the architecture has a proper
- * siblings map:
- */
-static void check_sibling_maps(void)
-{
- int i, j;
-
- for_each_online_cpu(i) {
- for_each_cpu_mask(j, cpu_sibling_map[i]) {
- if (cpu_to_node(i) != cpu_to_node(j)) {
- printk(KERN_INFO "warning: CPU %d siblings map "
- "to different node - isolating "
- "them.\n", i);
- cpu_sibling_map[i] = cpumask_of_cpu(i);
- break;
- }
- }
- }
-}
-#endif
-
/*
* Build sched domains for a given set of cpus and attach the sched domains
* to the individual cpus
*/
-static void build_sched_domains(const cpumask_t *cpu_map)
+void build_sched_domains(const cpumask_t *cpu_map)
{
int i;
@@ -5592,11 +5649,22 @@ static void build_sched_domains(const cp
cpus_and(nodemask, nodemask, *cpu_map);
#ifdef CONFIG_NUMA
+ if (num_online_cpus()
+ > SD_NODES_PER_DOMAIN*cpus_weight(nodemask)) {
+ sd = &per_cpu(allnodes_domains, i);
+ *sd = SD_ALLNODES_INIT;
+ sd->span = *cpu_map;
+ group = cpu_to_allnodes_group(i);
+ sd->groups = &sched_group_allnodes[group];
+ p = sd;
+ } else
+ p = NULL;
+
sd = &per_cpu(node_domains, i);
- group = cpu_to_node_group(i);
*sd = SD_NODE_INIT;
- sd->span = *cpu_map;
- sd->groups = &sched_group_nodes[group];
+ sd->span = sched_domain_node_span(cpu_to_node(i));
+ sd->parent = p;
+ cpus_and(sd->span, sd->span, *cpu_map);
#endif
p = sd;
@@ -5621,7 +5689,7 @@ static void build_sched_domains(const cp
#ifdef CONFIG_SCHED_SMT
/* Set up CPU (sibling) groups */
- for_each_online_cpu(i) {
+ for_each_cpu_mask(i, *cpu_map) {
cpumask_t this_sibling_map = cpu_sibling_map[i];
cpus_and(this_sibling_map, this_sibling_map, *cpu_map);
if (i != first_cpu(this_sibling_map))
@@ -5646,8 +5714,74 @@ static void build_sched_domains(const cp
#ifdef CONFIG_NUMA
/* Set up node groups */
- init_sched_build_groups(sched_group_nodes, *cpu_map,
- &cpu_to_node_group);
+ init_sched_build_groups(sched_group_allnodes, *cpu_map,
+ &cpu_to_allnodes_group);
+
+ for (i = 0; i < MAX_NUMNODES; i++) {
+ /* Set up node groups */
+ struct sched_group *sg, *prev;
+ cpumask_t nodemask = node_to_cpumask(i);
+ cpumask_t domainspan;
+ cpumask_t covered = CPU_MASK_NONE;
+ int j;
+
+ cpus_and(nodemask, nodemask, *cpu_map);
+ if (cpus_empty(nodemask))
+ continue;
+
+ domainspan = sched_domain_node_span(i);
+ cpus_and(domainspan, domainspan, *cpu_map);
+
+ sg = kmalloc(sizeof(struct sched_group), GFP_KERNEL);
+ sched_group_nodes[i] = sg;
+ for_each_cpu_mask(j, nodemask) {
+ struct sched_domain *sd;
+ sd = &per_cpu(node_domains, j);
+ sd->groups = sg;
+ if (sd->groups == NULL) {
+ /* Turn off balancing if we have no groups */
+ sd->flags = 0;
+ }
+ }
+ if (!sg) {
+ printk(KERN_WARNING
+ "Can not alloc domain group for node %d\n", i);
+ continue;
+ }
+ sg->cpu_power = 0;
+ sg->cpumask = nodemask;
+ cpus_or(covered, covered, nodemask);
+ prev = sg;
+
+ for (j = 0; j < MAX_NUMNODES; j++) {
+ cpumask_t tmp, notcovered;
+ int n = (i + j) % MAX_NUMNODES;
+
+ cpus_complement(notcovered, covered);
+ cpus_and(tmp, notcovered, *cpu_map);
+ cpus_and(tmp, tmp, domainspan);
+ if (cpus_empty(tmp))
+ break;
+
+ nodemask = node_to_cpumask(n);
+ cpus_and(tmp, tmp, nodemask);
+ if (cpus_empty(tmp))
+ continue;
+
+ sg = kmalloc(sizeof(struct sched_group), GFP_KERNEL);
+ if (!sg) {
+ printk(KERN_WARNING
+ "Can not alloc domain group for node %d\n", j);
+ break;
+ }
+ sg->cpu_power = 0;
+ sg->cpumask = tmp;
+ cpus_or(covered, covered, tmp);
+ prev->next = sg;
+ prev = sg;
+ }
+ prev->next = sched_group_nodes[i];
+ }
#endif
/* Calculate CPU power for physical packages and nodes */
@@ -5666,14 +5800,46 @@ static void build_sched_domains(const cp
sd->groups->cpu_power = power;
#ifdef CONFIG_NUMA
- if (i == first_cpu(sd->groups->cpumask)) {
- /* Only add "power" once for each physical package. */
- sd = &per_cpu(node_domains, i);
- sd->groups->cpu_power += power;
+ sd = &per_cpu(allnodes_domains, i);
+ if (sd->groups) {
+ power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE *
+ (cpus_weight(sd->groups->cpumask)-1) / 10;
+ sd->groups->cpu_power = power;
}
#endif
}
+#ifdef CONFIG_NUMA
+ for (i = 0; i < MAX_NUMNODES; i++) {
+ struct sched_group *sg = sched_group_nodes[i];
+ int j;
+
+ if (sg == NULL)
+ continue;
+next_sg:
+ for_each_cpu_mask(j, sg->cpumask) {
+ struct sched_domain *sd;
+ int power;
+
+ sd = &per_cpu(phys_domains, j);
+ if (j != first_cpu(sd->groups->cpumask)) {
+ /*
+ * Only add "power" once for each
+ * physical package.
+ */
+ continue;
+ }
+ power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE *
+ (cpus_weight(sd->groups->cpumask)-1) / 10;
+
+ sg->cpu_power += power;
+ }
+ sg = sg->next;
+ if (sg != sched_group_nodes[i])
+ goto next_sg;
+ }
+#endif
+
/* Attach the domains */
for_each_cpu_mask(i, *cpu_map) {
struct sched_domain *sd;
@@ -5692,13 +5858,10 @@ static void build_sched_domains(const cp
/*
* Set up scheduler domains and groups. Callers must hold the hotplug lock.
*/
-static void arch_init_sched_domains(cpumask_t *cpu_map)
+static void arch_init_sched_domains(const cpumask_t *cpu_map)
{
cpumask_t cpu_default_map;
-#if defined(CONFIG_SCHED_SMT) && defined(CONFIG_NUMA)
- check_sibling_maps();
-#endif
/*
* Setup mask for cpus without special case scheduling requirements.
* For now this just excludes isolated cpus, but could be used to
@@ -5711,10 +5874,29 @@ static void arch_init_sched_domains(cpum
static void arch_destroy_sched_domains(const cpumask_t *cpu_map)
{
- /* Do nothing: everything is statically allocated. */
-}
+#ifdef CONFIG_NUMA
+ int i;
+ for (i = 0; i < MAX_NUMNODES; i++) {
+ cpumask_t nodemask = node_to_cpumask(i);
+ struct sched_group *oldsg, *sg = sched_group_nodes[i];
+
+ cpus_and(nodemask, nodemask, *cpu_map);
+ if (cpus_empty(nodemask))
+ continue;
-#endif /* ARCH_HAS_SCHED_DOMAIN */
+ if (sg == NULL)
+ continue;
+ sg = sg->next;
+next_sg:
+ oldsg = sg;
+ sg = sg->next;
+ kfree(oldsg);
+ if (oldsg != sched_group_nodes[i])
+ goto next_sg;
+ sched_group_nodes[i] = NULL;
+ }
+#endif
+}
/*
* Detach sched domains from a group of cpus specified in cpu_map
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
