Second try, this time with a better subject. Hi,
I have a new Laptop, a Medion E4214, with a standard xubuntu LTS 14.04 installed. My problem is, that the notebook does neither reboot nor powerdown (and consequently, suspend and hibernate do not work either). It hangs late in the powerdown/reboot sequence, with no error message shown on the console, and I need to hold down the power button for 5s to switch it off hard. I switched off the grub splash screen, to not miss any console messages, I stopped X, network, sound and bluetooth, so that the loaded modules are only (lsmod output): Module Size Used by i915 1146880 1 drm_kms_helper 126976 1 i915 drm 352256 3 i915,drm_kms_helper i2c_algo_bit 16384 1 i915 video 28672 1 i915 ahci 36864 2 libahci 32768 1 ahci The problem persists, so if it the problem is in one of the drivers, it must be one of the drivers above. I tried to start with the reboot= set to acpi, bios, force or pci, to no avail. Needless to say, that the notebook reboots/powers off when running windows 8.1 The system is mostly intel, ValleyView SoC, with a Realtek Ethernet controller. Here is what lspci has to say: 00:00.0 Host bridge: Intel Corporation ValleyView SSA-CUnit (rev 0e) 00:02.0 VGA compatible controller: Intel Corporation ValleyView Gen7 (rev 0e) 00:12.0 SD Host controller: Intel Corporation ValleyView SDIO Controller (rev 0e) 00:13.0 SATA controller: Intel Corporation ValleyView 6-Port SATA AHCI Controller (rev 0e) 00:14.0 USB controller: Intel Corporation ValleyView USB xHCI Host Controller (rev 0e) 00:17.0 SD Host controller: Intel Corporation ValleyView MIPI-HSI Controller (rev 0e) 00:1a.0 Encryption controller: Intel Corporation ValleyView SEC (rev 0e) 00:1b.0 Audio device: Intel Corporation ValleyView High Definition Audio Controller (rev 0e) 00:1c.0 PCI bridge: Intel Corporation ValleyView PCI Express Root Port (rev 0e) 00:1c.1 PCI bridge: Intel Corporation ValleyView PCI Express Root Port (rev 0e) 00:1d.0 USB controller: Intel Corporation ValleyView USB Enhanced Host Controller (rev 0e) 00:1f.0 ISA bridge: Intel Corporation ValleyView Power Control Unit (rev 0e) 00:1f.3 SMBus: Intel Corporation ValleyView SMBus Controller (rev 0e) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c) Are there any options for startig / compiling to debug that further? Any tips appreciated. Nils -- Nils Rennebarth Software developer bintec elmeg security GmbH Neue Brücke 3 D-70173 Stuttgart Germany Tel: +49-711-900300-64 Email: nils.renneba...@bintec-elmeg.com www: www.bintec-elmeg.com Location: Nuremberg, Local Court Nuremberg, HRB 25481 Managing Director: Bernd Büttner -------------------------------- The information contained in this e-mail has been carefully researched, but the possibility of it being inapplicable in individual cases cannot be ruled out. We therefore regret that we cannot accept responsibility or liability of any kind whatsoever for the correctness of the information given. Please notify us if you discover that information is inapplicable. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
