On Sun, 14 Jun 2015, Charles Keepax wrote:
> The PM runtime core by default assumes a chip is suspended when runtime
> PM is enabled. Currently the arizona driver enables runtime PM when the
> chip is fully active and then disables the DCVDD regulator at the end of
> arizona_dev_init. This however has several problems, firstly the if we
> reach the end of arizona_dev_init, we did not properly follow all the
> proceedures for shutting down the chip, and most notably we never marked
> the chip as cache only so any writes occurring between then and the next
> PM runtime resume will be lost. Secondly, if we are already resumed when
> we reach the end of dev_init, then at best we get unbalanced regulator
> enable/disables at work we lose DCVDD whilst we need it.
>
> Additionally, since the commit 4f0216409f7c ("mfd: arizona: Add better
> support for system suspend"), the PM runtime operations may
> disable/enable the IRQ, so the IRQs must now be enabled before we call
> any PM operations.
>
> This patch adds a call to pm_runtime_set_active to inform the PM core
> that the device is starting up active and moves the PM enabling to
> around the IRQ initialisation to avoid any PM callbacks happening until
> the IRQs are initialised.
>
> Signed-off-by: Charles Keepax <ckee...@opensource.wolfsonmicro.com>
> ---
> drivers/mfd/arizona-core.c | 14 ++++++--------
> 1 files changed, 6 insertions(+), 8 deletions(-)
Applied, thanks.
> diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
> index e60bcd9..a72ddb2 100644
> --- a/drivers/mfd/arizona-core.c
> +++ b/drivers/mfd/arizona-core.c
> @@ -1141,10 +1141,6 @@ int arizona_dev_init(struct arizona *arizona)
> arizona->pdata.gpio_defaults[i]);
> }
>
> - pm_runtime_set_autosuspend_delay(arizona->dev, 100);
> - pm_runtime_use_autosuspend(arizona->dev);
> - pm_runtime_enable(arizona->dev);
> -
> /* Chip default */
> if (!arizona->pdata.clk32k_src)
> arizona->pdata.clk32k_src = ARIZONA_32KZ_MCLK2;
> @@ -1245,11 +1241,17 @@ int arizona_dev_init(struct arizona *arizona)
> arizona->pdata.spk_fmt[i]);
> }
>
> + pm_runtime_set_active(arizona->dev);
> + pm_runtime_enable(arizona->dev);
> +
> /* Set up for interrupts */
> ret = arizona_irq_init(arizona);
> if (ret != 0)
> goto err_reset;
>
> + pm_runtime_set_autosuspend_delay(arizona->dev, 100);
> + pm_runtime_use_autosuspend(arizona->dev);
> +
> arizona_request_irq(arizona, ARIZONA_IRQ_CLKGEN_ERR, "CLKGEN error",
> arizona_clkgen_err, arizona);
> arizona_request_irq(arizona, ARIZONA_IRQ_OVERCLOCKED, "Overclocked",
> @@ -1278,10 +1280,6 @@ int arizona_dev_init(struct arizona *arizona)
> goto err_irq;
> }
>
> -#ifdef CONFIG_PM
> - regulator_disable(arizona->dcvdd);
> -#endif
> -
> return 0;
>
> err_irq:
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
