On 11/06/15 09:22, Gergely Imreh wrote:
> The Xilinx XADC driver has both a temperature channel and 8 voltage
> channels. The voltage channels have no offset, but actually were still
> set the same offset as the temperature channel. This did not cause
> problems in /sys/bus/iio/ but can cause problems with other drivers
> using iio data. For example iio-hwmon did return wrong voltage values
> because of the offset.
>
> Change tested with the Parallella board.
>
> Signed-off-by: Gergely Imreh <imr...@gmail.com>
Well spotted on the bug, but I think we are better off fixing this at the
true source of the problem which is in drivers/iio/inkern.c
iio_convert_raw_to_processed_unlocked which does a call to
iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_OFFSET) then uses
the error return to check if the offset parameter is available. It should
be checking that before making this call with a call to iio_channel_has_info.
I don't suppose you could prepare a patch fixing that as you found the problem?
If not I can fix it up sometime if no one else beats me to it.
Thanks
Jonathan
> ---
> drivers/iio/adc/xilinx-xadc-core.c | 14 +++++++++++---
> 1 file changed, 11 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/adc/xilinx-xadc-core.c
> b/drivers/iio/adc/xilinx-xadc-core.c
> index ab52be2..36efab7 100644
> --- a/drivers/iio/adc/xilinx-xadc-core.c
> +++ b/drivers/iio/adc/xilinx-xadc-core.c
> @@ -877,9 +877,17 @@ static int xadc_read_raw(struct iio_dev *indio_dev,
> return -EINVAL;
> }
> case IIO_CHAN_INFO_OFFSET:
> - /* Only the temperature channel has an offset */
> - *val = -((273150 << 12) / 503975);
> - return IIO_VAL_INT;
> + switch (chan->type) {
> + case IIO_VOLTAGE:
> + *val = 0;
> + return IIO_VAL_INT;
> + case IIO_TEMP:
> + /* Only the temperature channel has an offset */
> + *val = -((273150 << 12) / 503975);
> + return IIO_VAL_INT;
> + default:
> + return -EINVAL;
> + }
> case IIO_CHAN_INFO_SAMP_FREQ:
> ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
> if (ret)
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
