The `DAS08_EOC` macro contains a mask for the "end of A/D conversion"
bit in the status register. The logic is reverse sense in that the bit
is set to 1 while the conversion is in progress and set to 0 when the
conversion is complete. Rename the macro to `DAS08_STATUS_AI_BUSY` and
add a comment. Also make use of the `BIT()` macro to define the value.
Signed-off-by: Ian Abbott <abbo...@mev.co.uk>
---
drivers/staging/comedi/drivers/das08.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das08.c
b/drivers/staging/comedi/drivers/das08.c
index eecbf4d..0484308 100644
--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -58,7 +58,7 @@
#define DAS08_AI_MSB_REG 0x01 /* (R) AI most significant bits */
#define DAS08_AI_TRIG_REG 0x01 /* (W) AI software trigger */
#define DAS08_STATUS_REG 0x02 /* (R) status */
-#define DAS08_EOC (1<<7)
+#define DAS08_STATUS_AI_BUSY BIT(7) /* AI conversion in progress */
#define DAS08_IRQ (1<<3)
#define DAS08_IP(x) (((x)>>4)&0x7)
#define DAS08_CONTROL 2
@@ -206,7 +206,7 @@ static int das08_ai_eoc(struct comedi_device *dev,
unsigned int status;
status = inb(dev->iobase + DAS08_STATUS_REG);
- if ((status & DAS08_EOC) == 0)
+ if ((status & DAS08_STATUS_AI_BUSY) == 0)
return 0;
return -EBUSY;
}
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
