Minimal PowerOP support for Intel Enhanced Speedstep "Centrino"
notebooks. These systems run at an operating point comprised of a cpu
frequency and a core voltage. The voltage could be set from the values
recommended in the datasheets if left unspecified (-1) in the operating
point, as cpufreq does.
Index: linux-2.6.12/arch/i386/Kconfig
===================================================================
--- linux-2.6.12.orig/arch/i386/Kconfig 2005-08-02 23:39:05.000000000 +0000
+++ linux-2.6.12/arch/i386/Kconfig 2005-08-03 01:11:21.000000000 +0000
@@ -1098,6 +1098,7 @@
endmenu
source "arch/i386/kernel/cpu/cpufreq/Kconfig"
+source "arch/i386/kernel/cpu/powerop/Kconfig"
endmenu
Index: linux-2.6.12/arch/i386/kernel/cpu/Makefile
===================================================================
--- linux-2.6.12.orig/arch/i386/kernel/cpu/Makefile 2005-08-02
23:39:05.000000000 +0000
+++ linux-2.6.12/arch/i386/kernel/cpu/Makefile 2005-08-03 01:11:21.000000000
+0000
@@ -17,3 +17,4 @@
obj-$(CONFIG_MTRR) += mtrr/
obj-$(CONFIG_CPU_FREQ) += cpufreq/
+obj-$(CONFIG_POWEROP) += powerop/
Index: linux-2.6.12/arch/i386/kernel/cpu/powerop/Kconfig
===================================================================
--- linux-2.6.12.orig/arch/i386/kernel/cpu/powerop/Kconfig 1970-01-01
00:00:00.000000000 +0000
+++ linux-2.6.12/arch/i386/kernel/cpu/powerop/Kconfig 2005-08-03
01:11:21.000000000 +0000
@@ -0,0 +1,6 @@
+source "drivers/powerop/Kconfig"
+
+config POWEROP_CENTRINO
+ tristate "PowerOP for Intel Centrino Enhanced Speedstep"
+ depends on POWEROP
+ default n
Index: linux-2.6.12/arch/i386/kernel/cpu/powerop/Makefile
===================================================================
--- linux-2.6.12.orig/arch/i386/kernel/cpu/powerop/Makefile 1970-01-01
00:00:00.000000000 +0000
+++ linux-2.6.12/arch/i386/kernel/cpu/powerop/Makefile 2005-08-03
01:11:21.000000000 +0000
@@ -0,0 +1,2 @@
+obj-$(CONFIG_POWEROP_CENTRINO) += powerop-centrino.o
+
Index: linux-2.6.12/arch/i386/kernel/cpu/powerop/powerop-centrino.c
===================================================================
--- linux-2.6.12.orig/arch/i386/kernel/cpu/powerop/powerop-centrino.c
1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.12/arch/i386/kernel/cpu/powerop/powerop-centrino.c
2005-08-03 06:41:37.000000000 +0000
@@ -0,0 +1,160 @@
+/*
+ * PowerOP support for Intel Enhanced Speedstep "Centrino" platforms.
+ *
+ * Based heavily on speedstep-centrino.c of cpufreq Copyright (c) 2003
+ * by Jeremy Fitzhardinge <[EMAIL PROTECTED]>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/powerop.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/slab.h>
+
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/cpufeature.h>
+
+static int
+powerop_centrino_get_point(struct powerop_point *point)
+{
+ unsigned l, h;
+ unsigned cpu_freq;
+
+ rdmsr(MSR_IA32_PERF_STATUS, l, h);
+ if (unlikely((cpu_freq = ((l >> 8) & 0xff) * 100) == 0)) {
+ /*
+ * On some CPUs, we can see transient MSR values (which are
+ * not present in _PSS), while CPU is doing some automatic
+ * P-state transition (like TM2). Get the last freq set
+ * in PERF_CTL.
+ */
+ rdmsr(MSR_IA32_PERF_CTL, l, h);
+ cpu_freq = ((l >> 8) & 0xff) * 100;
+ }
+
+ point->param[POWEROP_CPU + smp_processor_id()] = cpu_freq;
+ point->param[POWEROP_V + smp_processor_id()] = ((l & 0xff) * 16) + 700;
+ return 0;
+}
+
+static int
+powerop_centrino_set_point(struct powerop_point *point)
+{
+ unsigned int msr = 0, oldmsr, h, mask = 0;
+
+ if (point->param[POWEROP_CPU + smp_processor_id()] != -1) {
+ msr |= (point->param[POWEROP_CPU + smp_processor_id()]/100)
+ << 8;
+ mask |= 0xff00;
+ }
+
+ if (point->param[POWEROP_V + smp_processor_id()] != -1) {
+ msr |= ((point->param[POWEROP_V + smp_processor_id()] - 700)
+ / 16);
+ mask |= 0xff;
+ }
+
+ rdmsr(MSR_IA32_PERF_CTL, oldmsr, h);
+
+ if (msr == (oldmsr & mask))
+ return 0;
+
+ /* all but 16 LSB are "reserved", so treat them with
+ care */
+ oldmsr &= ~mask;
+ msr &= mask;
+ oldmsr |= msr;
+
+ wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
+ return 0;
+}
+
+#ifdef CONFIG_POWEROP_SYSFS
+static char *powerop_param_names[POWEROP_DRIVER_MAX_PARAMS];
+
+static int __init powerop_centrino_sysfs_init(void)
+{
+ int i;
+
+ for (i = 0; i < NR_CPUS; i++) {
+ if (! (powerop_param_names[POWEROP_CPU + i] =
+ kmalloc(5 + i / 10, GFP_KERNEL)) ||
+ ! (powerop_param_names[POWEROP_V + i] =
+ kmalloc(3 + i / 10, GFP_KERNEL)))
+ goto nomem;
+
+ sprintf(powerop_param_names[POWEROP_CPU + i], "cpu%d", i);
+ sprintf(powerop_param_names[POWEROP_V + i], "v%d", i);
+ }
+
+ return 0;
+
+nomem:
+ printk(KERN_ERR "power-centrino malloc failed\n");
+
+ for (i = 0; i < NR_CPUS; i++) {
+ kfree(powerop_param_names[POWEROP_CPU + i]);
+ kfree(powerop_param_names[POWEROP_V + i]);
+ }
+
+ return -ENOMEM;
+}
+#else
+static int __init powerop_centrino_sysfs_init(void)
+{
+ return 0;
+}
+#endif
+
+static struct powerop_driver power_driver_centrino = {
+ .name = "centrino",
+ .nr_params = POWEROP_DRIVER_MAX_PARAMS,
+#ifdef CONFIG_POWEROP_SYSFS
+ .param_names = powerop_param_names,
+#endif
+ .get_point = powerop_centrino_get_point,
+ .set_point = powerop_centrino_set_point,
+};
+
+static int __init powerop_centrino_init(void)
+{
+ struct cpuinfo_x86 *cpu = cpu_data;
+ unsigned l, h;
+
+ if (!cpu_has(cpu, X86_FEATURE_EST))
+ return -ENODEV;
+
+ /* Check to see if Enhanced SpeedStep is enabled, and try to
+ enable it if not. */
+ rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+
+ if (!(l & (1<<16))) {
+ l |= (1<<16);
+ wrmsr(MSR_IA32_MISC_ENABLE, l, h);
+
+ /* check to see if it stuck */
+ rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+ if (!(l & (1<<16))) {
+ printk(KERN_INFO "PowerOP: Couldn't enable Enhanced
SpeedStep\n");
+ return -ENODEV;
+ }
+ }
+
+ return powerop_centrino_sysfs_init() ||
+ powerop_driver_register(&power_driver_centrino);
+}
+
+static void __exit powerop_centrino_exit(void)
+{
+ powerop_driver_unregister(&power_driver_centrino);
+}
+
+module_init(powerop_centrino_init);
+module_exit(powerop_centrino_exit);
Index: linux-2.6.12/include/asm-i386/powerop-centrino.h
===================================================================
--- linux-2.6.12.orig/include/asm-i386/powerop-centrino.h 1970-01-01
00:00:00.000000000 +0000
+++ linux-2.6.12/include/asm-i386/powerop-centrino.h 2005-08-03
01:24:16.000000000 +0000
@@ -0,0 +1,20 @@
+/*
+ * PowerOP support for Intel Enhanced Speedstep "Centrino" platforms.
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_POWEROP_CENTRINO_H__
+#define __ASM_POWEROP_CENTRINO_H__
+
+#include <linux/threads.h>
+
+#define POWEROP_CPU 0 /* CPU freq in MHz*/
+#define POWEROP_V NR_CPUS /* core voltage */
+
+#define POWEROP_DRIVER_MAX_PARAMS 2*NR_CPUS /* max # params */
+
+#endif /* __ASM_POWEROP_CENTRINO_H__ */
Index: linux-2.6.12/include/asm-i386/powerop.h
===================================================================
--- linux-2.6.12.orig/include/asm-i386/powerop.h 1970-01-01
00:00:00.000000000 +0000
+++ linux-2.6.12/include/asm-i386/powerop.h 2005-08-03 01:23:03.000000000
+0000
@@ -0,0 +1,19 @@
+/*
+ * PowerOP support for i386 platforms.
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_POWEROP_H__
+#define __ASM_POWEROP_H__
+
+#include <linux/config.h>
+
+#ifdef CONFIG_POWEROP_CENTRINO
+#include <asm/powerop-centrino.h>
+#endif
+
+#endif /* __ASM_POWEROP_H__ */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
