On Saturday 02 May 2015 14:30:57 Gabriele Mazzotta wrote:
> This driver adds the initial support for the ACPI Ambient Light Sensor
> as defined in Section 9.2 of the ACPI specification (Revision 5.0) [1].
>
> Sensors complying with the standard are exposed as ACPI devices with
> ACPI0008 as hardware ID and provide standard methods by which the OS
> can query properties of the ambient light environment the system is
> currently operating in.
>
> This driver currently allows only to get the current ambient light
> illuminance reading through the _ALI method, but is ready to be
> extended extended to handle _ALC, _ALT and _ALP as well.
>
> [1] http://www.acpi.info/DOWNLOADS/ACPIspec50.pdf
>
> Signed-off-by: Martin Liska <marxin.li...@gmail.com>
> Signed-off-by: Marek Vasut <ma...@denx.de>
> Signed-off-by: Gabriele Mazzotta <gabriele....@gmail.com>
> Cc: Zhang Rui <rui.zh...@intel.com>
> ---
> Changes since v8:
> - Set realbits to 32
> - Fix license mismatch (using GPL v2 or later)
> - Drop iio_device_unregister() in favor of devm_iio_device_register()
>
> drivers/iio/light/Kconfig | 12 +++
> drivers/iio/light/Makefile | 1 +
> drivers/iio/light/acpi-als.c | 232
> +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 245 insertions(+)
> create mode 100644 drivers/iio/light/acpi-als.c
>
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> index 01a1a16..898b2b5 100644
> --- a/drivers/iio/light/Kconfig
> +++ b/drivers/iio/light/Kconfig
> @@ -5,6 +5,18 @@
>
> menu "Light sensors"
>
> +config ACPI_ALS
> + tristate "ACPI Ambient Light Sensor"
> + depends on ACPI
I'm sorry, but I've just noticed that here there should also be
select IIO_BUFFER
I hope it's not too late and I can resend this patch if needed.
Gabriele
> + select IIO_TRIGGERED_BUFFER
> + select IIO_KFIFO_BUF
> + help
> + Say Y here if you want to build a driver for the ACPI0008
> + Ambient Light Sensor.
> +
> + To compile this driver as a module, choose M here: the module will
> + be called acpi-als.
> +
> config ADJD_S311
> tristate "ADJD-S311-CR999 digital color sensor"
> select IIO_BUFFER
> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
> index ad7c30f..d9aad52a 100644
> --- a/drivers/iio/light/Makefile
> +++ b/drivers/iio/light/Makefile
> @@ -3,6 +3,7 @@
> #
>
> # When adding new entries keep the list in alphabetical order
> +obj-$(CONFIG_ACPI_ALS) += acpi-als.o
> obj-$(CONFIG_ADJD_S311) += adjd_s311.o
> obj-$(CONFIG_AL3320A) += al3320a.o
> obj-$(CONFIG_APDS9300) += apds9300.o
> diff --git a/drivers/iio/light/acpi-als.c b/drivers/iio/light/acpi-als.c
> new file mode 100644
> index 0000000..9839c9a
> --- /dev/null
> +++ b/drivers/iio/light/acpi-als.c
> @@ -0,0 +1,232 @@
> +/*
> + * ACPI Ambient Light Sensor Driver
> + *
> + * Based on ALS driver:
> + * Copyright (C) 2009 Zhang Rui <rui.zh...@intel.com>
> + *
> + * Rework for IIO subsystem:
> + * Copyright (C) 2012-2013 Martin Liska <marxin.li...@gmail.com>
> + *
> + * Final cleanup and debugging:
> + * Copyright (C) 2013-2014 Marek Vasut <ma...@denx.de>
> + * Copyright (C) 2015 Gabriele Mazzotta <gabriele....@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/acpi.h>
> +#include <linux/err.h>
> +#include <linux/mutex.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/kfifo_buf.h>
> +
> +#define ACPI_ALS_CLASS "als"
> +#define ACPI_ALS_DEVICE_NAME "acpi-als"
> +#define ACPI_ALS_NOTIFY_ILLUMINANCE 0x80
> +
> +ACPI_MODULE_NAME("acpi-als");
> +
> +/*
> + * So far, there's only one channel in here, but the specification for
> + * ACPI0008 says there can be more to what the block can report. Like
> + * chromaticity and such. We are ready for incoming additions!
> + */
> +static const struct iio_chan_spec acpi_als_channels[] = {
> + {
> + .type = IIO_LIGHT,
> + .scan_type = {
> + .sign = 's',
> + .realbits = 32,
> + .storagebits = 32,
> + },
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + },
> +};
> +
> +/*
> + * The event buffer contains timestamp and all the data from
> + * the ACPI0008 block. There are multiple, but so far we only
> + * support _ALI (illuminance). Once someone adds new channels
> + * to acpi_als_channels[], the evt_buffer below will grow
> + * automatically.
> + */
> +#define EVT_NR_SOURCES ARRAY_SIZE(acpi_als_channels)
> +#define EVT_BUFFER_SIZE \
> + (sizeof(s64) + (EVT_NR_SOURCES * sizeof(s32)))
> +
> +struct acpi_als {
> + struct acpi_device *device;
> + struct mutex lock;
> +
> + s32 evt_buffer[EVT_BUFFER_SIZE];
> +};
> +
> +/*
> + * All types of properties the ACPI0008 block can report. The ALI, ALC, ALT
> + * and ALP can all be handled by als_read_value() below, while the ALR is
> + * special.
> + *
> + * The _ALR property returns tables that can be used to fine-tune the values
> + * reported by the other props based on the particular hardware type and it's
> + * location (it contains tables for "rainy", "bright inhouse lighting" etc.).
> + *
> + * So far, we support only ALI (illuminance).
> + */
> +#define ACPI_ALS_ILLUMINANCE "_ALI"
> +#define ACPI_ALS_CHROMATICITY "_ALC"
> +#define ACPI_ALS_COLOR_TEMP "_ALT"
> +#define ACPI_ALS_POLLING "_ALP"
> +#define ACPI_ALS_TABLES "_ALR"
> +
> +static int als_read_value(struct acpi_als *als, char *prop, s32 *val)
> +{
> + unsigned long long temp_val;
> + acpi_status status;
> +
> + status = acpi_evaluate_integer(als->device->handle, prop, NULL,
> + &temp_val);
> +
> + if (ACPI_FAILURE(status)) {
> + ACPI_EXCEPTION((AE_INFO, status, "Error reading ALS %s", prop));
> + return -EIO;
> + }
> +
> + *val = temp_val;
> +
> + return 0;
> +}
> +
> +static void acpi_als_notify(struct acpi_device *device, u32 event)
> +{
> + struct iio_dev *indio_dev = acpi_driver_data(device);
> + struct acpi_als *als = iio_priv(indio_dev);
> + s32 *buffer = als->evt_buffer;
> + s64 time_ns = iio_get_time_ns();
> + s32 val;
> + int ret;
> +
> + mutex_lock(&als->lock);
> +
> + memset(buffer, 0, EVT_BUFFER_SIZE);
> +
> + switch (event) {
> + case ACPI_ALS_NOTIFY_ILLUMINANCE:
> + ret = als_read_value(als, ACPI_ALS_ILLUMINANCE, &val);
> + if (ret < 0)
> + goto out;
> + *buffer++ = val;
> + break;
> + default:
> + /* Unhandled event */
> + dev_dbg(&device->dev, "Unhandled ACPI ALS event (%08x)!\n",
> + event);
> + goto out;
> + }
> +
> + iio_push_to_buffers_with_timestamp(indio_dev,
> + (u8 *)als->evt_buffer, time_ns);
> +
> +out:
> + mutex_unlock(&als->lock);
> +}
> +
> +static int acpi_als_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int *val,
> + int *val2, long mask)
> +{
> + struct acpi_als *als = iio_priv(indio_dev);
> + s32 temp_val;
> + int ret;
> +
> + if (mask != IIO_CHAN_INFO_RAW)
> + return -EINVAL;
> +
> + /* we support only illumination (_ALI) so far. */
> + if (chan->type != IIO_LIGHT)
> + return -EINVAL;
> +
> + ret = als_read_value(als, ACPI_ALS_ILLUMINANCE, &temp_val);
> + if (ret < 0)
> + return ret;
> +
> + *val = temp_val;
> +
> + return IIO_VAL_INT;
> +}
> +
> +static const struct iio_info acpi_als_info = {
> + .driver_module = THIS_MODULE,
> + .read_raw = acpi_als_read_raw,
> +};
> +
> +static int acpi_als_add(struct acpi_device *device)
> +{
> + struct acpi_als *als;
> + struct iio_dev *indio_dev;
> + struct iio_buffer *buffer;
> +
> + indio_dev = devm_iio_device_alloc(&device->dev, sizeof(*als));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + als = iio_priv(indio_dev);
> +
> + device->driver_data = indio_dev;
> + als->device = device;
> + mutex_init(&als->lock);
> +
> + indio_dev->name = ACPI_ALS_DEVICE_NAME;
> + indio_dev->dev.parent = &device->dev;
> + indio_dev->info = &acpi_als_info;
> + indio_dev->modes = INDIO_BUFFER_SOFTWARE;
> + indio_dev->channels = acpi_als_channels;
> + indio_dev->num_channels = ARRAY_SIZE(acpi_als_channels);
> +
> + buffer = devm_iio_kfifo_allocate(&device->dev);
> + if (!buffer)
> + return -ENOMEM;
> +
> + iio_device_attach_buffer(indio_dev, buffer);
> +
> + return devm_iio_device_register(&device->dev, indio_dev);
> +}
> +
> +static const struct acpi_device_id acpi_als_device_ids[] = {
> + {"ACPI0008", 0},
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(acpi, acpi_als_device_ids);
> +
> +static struct acpi_driver acpi_als_driver = {
> + .name = "acpi_als",
> + .class = ACPI_ALS_CLASS,
> + .ids = acpi_als_device_ids,
> + .ops = {
> + .add = acpi_als_add,
> + .notify = acpi_als_notify,
> + },
> +};
> +
> +module_acpi_driver(acpi_als_driver);
> +
> +MODULE_AUTHOR("Zhang Rui <rui.zh...@intel.com>");
> +MODULE_AUTHOR("Martin Liska <marxin.li...@gmail.com>");
> +MODULE_AUTHOR("Marek Vasut <ma...@denx.de>");
> +MODULE_DESCRIPTION("ACPI Ambient Light Sensor Driver");
> +MODULE_LICENSE("GPL");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
