Dear corbet,
Here is the over idea about the driver status.
My driver supports 4 SD cards at a time.
The driver works well when there are partitions are disabled.
i.e. when alloc_disk(1); - i.e. no partitions
Right now, I am working on getting the driver up with partitions
supported.
After making changes in the gendisk initialization, I am able to mount
the device in the socket 0 but I am NOT able mount the devices in the
rest of the sockets when partitions are enabled?
Also, there is nothing specific that I am implementing for partition IO
request support on the devices.
However,
I am in bit confusion whether the following gendisk will suffice the
requirement or NOT?
Will u please verify the gendisk code below?
Here is how I am initializing the gendisk in my driver.
----------------------gendisk impl ----------------------------
gDisk->blkqueue = blk_init_queue(do_request, &gDisk->qlock);
if(gDisk->blkqueue == NULL) {
printk("FM ERROR | Queue Initialization failed!\n");
return FAILURE;
}
/* set sector size */
blk_queue_hardsect_size(gDisk->blkqueue, DEV_SECT_SIZE);
/* add gendisk: partitioning support.... */
gDisk->gd = alloc_disk(4); /* 3 -> 3 partitions */
if(! gDisk->gd) {
printk("FM ERROR | alloc_disk failed!\n");
return FAILURE;
}
gDisk->gd->major = major_num;
gDisk->gd->first_minor = (int_of(Dev->dName[2]) *
MAX_NUM_SOCKETS) +
(iSock * 4);
gDisk->gd->fops = &bd_op;
gDisk->gd->private_data = Dev;
for(i=0;i<3;i++)
devName[i] = Dev->dName[i];
devName[i] = char_of(iSock);
devName[i+1] = '\0';
strcpy(gDisk->gd->disk_name, devName);
PRINTK("Device Name under /dev/ = %s\n", devName);
/* removable media */
gDisk->gd->flags |= GENHD_FL_REMOVABLE;
set_capacity(gDisk->gd,
((dSize * 1024)/DEV_SECT_SIZE) *
(DEV_SECT_SIZE/KRNL_SECT_SIZE));
gDisk->gd->queue = gDisk->blkqueue;
add_disk(gDisk->gd);
----------------------gendisk impl ENDS ----------------------------
This gendisk is invoked at socket initialization.
For example, phy devices are
/dev/tfa0 - 3: socket 1
/dev/tfa4 - 7: socket 2
/dev/tfa8 - 11: socket 3
/dev/tfa12 -15: socket 4
i.e, I have created the nodes like minors 0, 1, 2, 3 for socket0
I have created the nodes like minors 12, 13, 14, 15 for socket3.
With these physical nodes, I through it should work.
When a card is inserted in the socket 0, I am able to mount.
BUT, when a card is inserted in the socket 3, I am NOT able to mount and
it says.
Mount: /dev/tfa12 is not a valid block device
Can you convey me where exactly I am missing or why is it failing?
Regards,
Mukund Jampala
>-----Original Message-----
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
>Sent: Thursday, August 04, 2005 12:35 AM
>To: Mukund JB.
>Cc: linux-kernel@vger.kernel.org
>Subject: Re: 2.6 partition support driver methods
>
>> Do I need to handle any thing in the request function to handle
>> read/writes to the device partitions?
>
>It looks like you've done most of what you need; in 2.6, block drivers
>need not worry about the details of partitioning.
>
>Lots of details in the block drivers chapter of LDD3 if you need them:
>
> http://lwn.net/Kernel/LDD3/
>
>jon
>
>Jonathan Corbet
>Executive editor, LWN.net
>[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
