On Mon, Apr 27, 2015 at 03:03:58PM +0200, Nicolas George wrote:
> [ 409.772773] ata2.00: failed command: WRITE FPDMA QUEUED
> [ 409.772776] ata2.00: cmd 61/28:88:e0:a3:04/00:00:02:00:00/40 tag 17 ncq
> 20480 out
> [ 409.772776] res 50/00:28:e0:a3:04/00:00:02:00:00/40 Emask 0x10
> (ATA bus error)
> [ 409.772777] ata2.00: status: { DRDY }
> [ 409.772779] ata2: hard resetting link
> [ 410.092732] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 410.097670] ata2.00: configured for UDMA/133
>
> Last week, hinted by the penultimate line, I tried to lower the speed of the
> SATA link permanently, and it worked. I did this by adding
> "libata.force=2:3.0Gbps" to the kernel command line (configured using
> /etc/default/grub).
>
> Since then, no reset happened; I am confident that seven days without them
> are not a coincidence.
Two options occur to me:
1. There may be a firmware update for your disk.
2. You may have a bad SATA cable.
-dsr-
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
