On 04/27/2015 02:52 PM, John Ogness wrote:
> When stopping a DMA transfer with interrupts disabled it is possible
> that the DMA transfer completes before the events are cleared. In
> this case the completion interrupt will be pending, causing a
> completion callback after the transfer was stopped.
>
> By clearing the completion interrupt for the stopping channel it is
> ensured that no completion event will be generated after the stop.
Acked-by: Peter Ujfalusi <peter.ujfal...@ti.com>
> Signed-off-by: John Ogness <john.ogn...@linutronix.de>
> ---
> arch/arm/common/edma.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
> index 5662a87..873dbfc 100644
> --- a/arch/arm/common/edma.c
> +++ b/arch/arm/common/edma.c
> @@ -1350,6 +1350,9 @@ void edma_stop(unsigned channel)
> edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
> edma_write_array(ctlr, EDMA_EMCR, j, mask);
>
> + /* clear possibly pending completion interrupt */
> + edma_shadow0_write_array(ctlr, SH_ICR, j, mask);
> +
> pr_debug("EDMA: EER%d %08x\n", j,
> edma_shadow0_read_array(ctlr, SH_EER, j));
>
>
--
Péter
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
